| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Cost Calculator Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the SVG upload feature in all versions up to, and including, 3.1.67 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability has been found in Scooter Software Beyond Compare up to 3.3.5.15075 and classified as critical. Affected by this vulnerability is an unknown functionality in the library 7zxa.dll. The manipulation leads to uncontrolled search path. Attacking locally is a requirement. The real existence of this vulnerability is still doubted at the moment. The vendor explains that a system must be breached before exploiting this issue. They are not planning on making any changes to address it. |
| A vulnerability has been identified in SIMATIC S7-PLCSIM V17 (All versions), SIMATIC S7-PLCSIM V18 (All versions), SIMATIC STEP 7 Safety V17 (All versions < V17 Update 9), SIMATIC STEP 7 Safety V18 (All versions), SIMATIC STEP 7 Safety V19 (All versions < V19 Update 4), SIMATIC STEP 7 V17 (All versions < V17 Update 9), SIMATIC STEP 7 V18 (All versions), SIMATIC STEP 7 V19 (All versions < V19 Update 4), SIMATIC WinCC Unified PC Runtime V18 (All versions), SIMATIC WinCC Unified PC Runtime V19 (All versions < V19 Update 4), SIMATIC WinCC Unified V17 (All versions < V17 Update 9), SIMATIC WinCC Unified V18 (All versions), SIMATIC WinCC Unified V19 (All versions < V19 Update 4), SIMATIC WinCC V17 (All versions < V17 Update 9), SIMATIC WinCC V18 (All versions), SIMATIC WinCC V19 (All versions < V19 Update 4), SIMOCODE ES V17 (All versions), SIMOCODE ES V18 (All versions), SIMOCODE ES V19 (All versions), SIMOTION SCOUT TIA V5.4 (All versions), SIMOTION SCOUT TIA V5.5 (All versions), SIMOTION SCOUT TIA V5.6 (All versions < V5.6 SP1 HF7), SINAMICS Startdrive V17 (All versions), SINAMICS Startdrive V18 (All versions), SINAMICS Startdrive V19 (All versions), SIRIUS Safety ES V17 (TIA Portal) (All versions), SIRIUS Safety ES V18 (TIA Portal) (All versions), SIRIUS Safety ES V19 (TIA Portal) (All versions), SIRIUS Soft Starter ES V17 (TIA Portal) (All versions), SIRIUS Soft Starter ES V18 (TIA Portal) (All versions), SIRIUS Soft Starter ES V19 (TIA Portal) (All versions), TIA Portal Cloud V17 (All versions), TIA Portal Cloud V18 (All versions), TIA Portal Cloud V19 (All versions < V5.2.1.1). The affected devices do not properly sanitize user-controllable input when parsing user settings. This could allow an attacker to locally execute arbitrary commands in the host operating system with the privileges of the user. |
| The Swiss Toolkit For WP plugin for WordPress is vulnerable to authentication bypass in versions up to, and including, 1.0.7. This is due to the plugin storing custom data in post metadata without an underscore prefix. This makes it possible for authenticated attackers with contributor-level and above permissions to log in as any existing user on the site, such as an administrator. |
| Malformed BRID/HHIT records can cause `named` to terminate unexpectedly.
This issue affects BIND 9 versions 9.18.40 through 9.18.43, 9.20.13 through 9.20.17, 9.21.12 through 9.21.16, 9.18.40-S1 through 9.18.43-S1, and 9.20.13-S1 through 9.20.17-S1. |
| Privilege Escalation in OpenText Dimensions RM allows an authenticated user to escalate there privilege to the privilege of another user via HTTP Request |
| The application Sensei Mac Cleaner contains a local privilege escalation vulnerability, allowing an attacker to perform multiple operations as the root user. These operations include arbitrary file deletion and writing, loading and unloading daemons, manipulating file permissions, and loading extensions, among other actions.
The vulnerable module org.cindori.SenseiHelper can be contacted via XPC. While the module performs client validation, it relies on the client's PID obtained through the public processIdentifier property of the NSXPCConnection class. This approach makes the module susceptible to a PID Reuse Attack, enabling an attacker to impersonate a legitimate client and send crafted XPC messages to invoke arbitrary methods exposed by the HelperProtocol interface. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. XSLT parsing performed by various components are vulnerable to XML external entity injections. A processed XML file with a malicious DTD tag ( <!DOCTYPE foo [<!ENTITY example SYSTEM "/etc/passwd"> ]> could produce XML containing data from the host system. This impacts use cases where org.hl7.fhir.core is being used to within a host where external clients can submit XML. This is related to GHSA-6cr6-ph3p-f5rf, in which its fix (#1571 & #1717) was incomplete. This issue has been addressed in release version 6.4.0 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| SpiderControl SCADA Web Server has a vulnerability that could allow an
attacker to upload specially crafted malicious files without
authentication. |
| A flaw exists in the Windows login flow where an AuthContext token can
be exploited for replay attacks and authentication bypass. |
| changedetection.io is a free open source web page change detection tool. The validation for the file URI scheme falls short, and results in an attacker being able to read any file on the system. This issue only affects instances with a webdriver enabled, and `ALLOW_FILE_URI` false or not defined. The check used for URL protocol, `is_safe_url`, allows `file:` as a URL scheme. It later checks if local files are permitted, but one of the preconditions for the check is that the URL starts with `file://`. The issue comes with the fact that the file URI scheme is not required to have double slashes. This issue has been addressed in version 0.47.06 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| A weak credential vulnerability exists in Firewalla Box Software versions before 1.979. This vulnerability allows a physically close attacker to use the license UUID for authentication and provision SSH credentials over the Bluetooth Low-Energy (BTLE) interface. Once an attacker gains access to the LAN, they could log into the SSH interface using the provisioned credentials. The license UUID can be acquired through plain-text Bluetooth sniffing, reading the QR code on the bottom of the device, or brute-forcing the UUID (though this is less likely). |
| Trustee is a set of tools and components for attesting confidential guests and providing secrets to them. The ART (**Attestation Results Token**) token, generated by AS, could be manipulated by MITM attacker, but the verifier (CoCo Verification Demander like KBS) could still verify it successfully. In the payload of ART token, the ‘jwk’ could be replaced by attacker with his own pub key. Then attacker can use his own corresponding private key to sign the crafted ART token. Based on current code implementation (v0.8.0), such replacement and modification can not be detected. This issue has been addressed in version 0.8.2 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| An unauthenticated remote attacker can causes the CODESYS web server to access invalid memory which results in a DoS. |
| Use after free in the UEFI firmware of some Intel(R) Server M20NTP BIOS may allow a privileged user to potentially enable escalation of privilege via local access. |
| There is an elevation of privilege vulnerability in server
and client components of Absolute Secure Access prior to version 13.07.
Attackers with local access and valid desktop user credentials can elevate
their privilege to system level by passing invalid address data to the vulnerable
component. This could be used to
manipulate process tokens to elevate the privilege of a normal process to
System. The scope is changed, the impact to system confidentiality and
integrity is high, the impact to the availability of the effected component is
none. |
| Password Pusher is an open source application to communicate sensitive information over the web. A cross-site scripting (XSS) vulnerability was identified in the PasswordPusher application, affecting versions `v1.41.1` through and including `v.1.48.0`. The issue arises from an un-sanitized parameter which could allow attackers to inject malicious JavaScript into the application. Users who self-host and have the login system enabled are affected. Exploitation of this vulnerability could expose user data, access to user sessions or take unintended actions on behalf of users. To exploit this vulnerability, an attacker would need to convince a user to click a malicious account confirmation link. It is highly recommended to update to version `v1.48.1` or later to mitigate this risk. There are no known workarounds for this vulnerability.
### Solution
Update to version `v1.48.1` or later where input sanitization has been applied to the account confirmation process. If updating is not immediately possible, |
| An unauthenticated attacker who can connect to the Web Services feature (HTTP TCP port 80) can issue a WS-Scan SOAP request containing an unexpected JobToken value which will crash the target device. The device will reboot, after which the attacker can reissue the command to repeatedly crash the device. |
| An unauthenticated attacker who can connect to TCP port 9100 can issue a Printer Job Language (PJL) command that will crash the target device. The device will reboot, after which the attacker can reissue the command to repeatedly crash the device. A malformed PJL variable FORMLINES is set to a non number value causing the target to crash. |
| An authenticated attacker may trigger a stack based buffer overflow by performing a malformed request to either the HTTP service (TCP port 80), the HTTPS service (TCP port 443), or the IPP service (TCP port 631). The malformed request will contain an empty Origin header value and a malformed Referer header value. The Referer header value will trigger a stack based buffer overflow when the host value in the Referer header is processed and is greater than 64 bytes in length. |
