| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18, Federation upstream in RabbitMQ skips vhost authorization allowing cross-vhost message access. what the bug lets you do. A policymaker on one vhost reads and drains messages out of another vhost it has no permission on. With the default ack-mode the source messages are consumed (deleted), not copied. Why that should not 1. Federation validates the upstream URI without any vhost-access Cross-vhost message read/drain from a per-vhost policymaker, breaking vhost tenancy This issue is fixed in versions 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, the Shovel parameter parser converted attacker-controlled runtime parameter values into non-garbage-collected Erlang atoms before bounding them or checking a fixed allowlist. Exploitation requires network access to the Management HTTP API, valid credentials with both the management and policymaker tags, permission to set Shovel runtime parameters on a vhost, and the rabbitmq_shovel and rabbitmq_shovel_management plugins to be enabled. The attacker can exhaust the node-wide atom table and deny service, and malicious parameters are stored durably and reparsed when workers start, so atom pressure can recur after restart without a live attacker connection. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, AMQP 1.0 management GET /bindings exposes full binding topology to any authenticated AMQP user without resource/management permission checks. the AMQP 1.0 HTTP-over-AMQP management endpoint GET /bindings (the rabbitamqpmanagement handler) enumerates bindings between an arbitrary source exchange and destination queue/exchange in the caller's virtual host without performing any resource-level permission check. Unlike every sibling operation in the same module (which call checkresourceaccess / bindingchecks), the GET handler ignores the authenticated User and returns the binding list unchanged. As a result, any authenticated AMQP 1.0 client that can open a management link pair , including users with no management/monitoring/policymaker/administrator tag , can enumerate the complete binding topology (source exchanges, destination queues/exchanges, routing keys, and binding arguments) of the virtual host they can access. The equivalent HTTP management API (GET /api/bindings) Confidentiality impact: a non-management AMQP 1.0 user can enumerate the complete routing topology of any virtual host it can connect to , every (source exchange, destination queue/exchange, routing key, binding arguments) This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.23, 4.1.14, 4.2.9, and 4.3.3, the optional rabbitmq_jms_topic_exchange plugin's x-jms-topic exchange accepted a client-controlled rjms_erlang_selector binding expression whose LIKE evaluator expanded percent and underscore wildcards into overlapping PCRE fragments. It executed those fragments with raw re:run/3 without match or recursion limits, allowing an authenticated tenant that can bind and publish to consume broker scheduler CPU and deny service with pathological selectors. This issue is fixed in versions 4.0.23, 4.1.14, 4.2.9, and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3, native MQTT and MQTT over WebSocket behind a trusted PROXY Protocol frontend could lose the proxy-derived client address before the MQTT authentication path checked loopback_users, causing the frontend-to-broker address to be treated as loopback. An attacker who can reach the trusted frontend and has valid credentials for a loopback-restricted account can therefore bypass the source-address restriction; the issue does not bypass password authentication. This issue is fixed in versions 3.13.18, 4.0.23, 4.1.14, 4.2.9, and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7, Admin-only atom exhaustion: PUT /api/users tags list. settags/2 maps rabbitdatacoercion:toatom/1 over the user's tags list. The 20 MB management body limit fits ~3-4M short tag strings. An administrator can crash the node in a single request by creating a user (or importing definitions) with ~1M unique tag administrator. This issue is fixed in versions 4.0.22 and 4.1.14 and 4.2.7. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23, Incomplete fix for CVE-2026-44838: escaperegexchar/1 does not escape -, leaving room for an MQTT topic permission bypass. the CVE-2026-44838 fix made expandtopicpermission/2 escape regex metacharacters in expanded topic-permission variables (escaperegex(V)), but escaperegexchar/1 escapes \ ^ $ . | ? + ( ) [ ] { } and omits -. When a topic permission template places {clientid} inside a [...] character class A low-privileged authenticated MQTT user controlling its clientid can broaden topic authorization (read and write) when templates embed {clientid} in a [...] This issue is fixed in versions 4.3.3 and 4.2.9 and 4.1.14 and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.0.22 and 4.1.14 and 4.2.7 and 4.3.1, Atom exhaustion: toatom on global-parameter :name. resourceexists/2 (and the PUT/DELETE handlers) call rabbitdatacoercion:toatom/1 on the :name URL path segment. toatom/1 uses binarytoatom/2 (unsafe). The endpoint requires policymaker (not management, but below A user with the policymaker tag can crash the node by exhausting the atom table via repeated requests to /api/global-parameters/:name with unique :name Management plugin enabled policymaker tag ~1M HTTP. This issue is fixed in versions 4.0.22 and 4.1.14 and 4.2.7 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.3.3 and 4.2.9, OAuth2 Client Secret Exposed via Unauthenticated JavaScript Endpoint (CWE-200). when OAuth2 authentication is enabled for the RabbitMQ Management UI and the configured flow, IDP use a client secret, the oauthclientsecret configuration value is included in the JavaScript served by the unauthenticated endpoint /js/oidc-oauth/bootstrap.js. Any user who can reach the management UI port can retrieve the OAuth2 client secret without Files: deps/rabbitmqmanagement/src/rabbitmgmtwmauth.erl, line 186 deps/rabbitmqmanagement/src/rabbitmgmtoauthbootstrap.erl, lines 35-50 deps/rabbitmqmanagement/src/rabbitmgmtdispatcher.erl, lines 45-49 (route registration) Code Path: 1. The route /js/oidc-oauth/bootstrap.js is registered as a plain Cowboy handler (rabbitmgmtdispatcher.erl:46): Credential exposure for the affected configuration: OAuth2 client secret is accessible without any authentication Token theft: Attacker can complete the authorization code flow using stolen authorization codes Client impersonation: Attacker can make requests. Any RabbitMQ deployment with: This issue is fixed in versions 4.3.3 and 4.2.9. |
| RabbitMQ is a messaging and streaming broker. From 4.0.0 until 4.3.3, 4.2.9, 4.1.14, and 4.0.23, Shovel does not format state logged by the crash reporter and can leave unencrypted credentials in a crash dump file. the shovel worker genserver processes does not implement the formatstatus/2 callback. When these processes crash (e.g., due to network partitions, connection failures), the OTP SASL error handler writes the full process state , including plaintext AMQP passwords and URIs , to the error log. This is particularly severe for the shovel worker, which stores deobfuscated plaintext URIs (including amqp://user:password@host format) in its genserver state for the entire process Automatic Credential Exposure: Shovel worker crashes (common during network partitions) automatically write plaintext upstream/downstream passwords to error logs No Special Configuration Needed: Unlike DEBUG logging, SASL error reports are always active Broad. This issue is fixed in versions 4.3.3, 4.2.9, 4.1.14, and 4.0.23. |
| RabbitMQ is a messaging and streaming broker. From 4.1.0 until 4.3.3, 4.2.9, and 4.1.11, Stream Management Super-Stream Binding Keys Allocation Allows Low-Privilege Node Denial of Service. rabbitMQ 4.3.1 with rabbitmqstreammanagement enabled accepts PUT /api/stream/super-streams/{vhost}/{name} requests from an authenticated management user that can access the target vhost. When the request body contains the binding-keys field, the handler parses the attacker-controlled comma-separated string and builds the full stream-name list before checking whether the user has permission to configure the resulting streams. A low-privileged management user with vhost access but no configure, write, or read permission can therefore force large transient allocations before the resource permission check. In a 768 MB memory-limited container, one HTTP PUT with about 4.5 MB of JSON body killed the RabbitMQ container with Docker state exited true An authenticated low-privileged management user can kill a memory-limited RabbitMQ node with one HTTP This issue is fixed in versions 4.3.3, 4.2.9, and 4.1.11. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ Management rendered an AMQP authorization-error reason containing an attacker-controlled queue name as HTML when the OAuth management UI was enabled. Exploitation requires an attacker with queue configure permission, a management administrator who can see but cannot read that queue, and the administrator clicking Get Message(s). A queue name containing a base element can then retarget the automatic relative refresh because the Content Security Policy omits base-uri and connect-src, and an attacker endpoint that permits the management origin through CORS can receive the victim's Authorization header. This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5, RabbitMQ OAuth credential refresh retains revoked runtime tags. when an existing AMQP connection refreshes from an OAuth token that grants the impersonator tag to a valid same-username token that no longer grants that tag, RabbitMQ updates the OAuth backend implementation (token/scopes/expiry) but leaves the connection's runtime #user.tags unchanged. rabbitaccesscontrol:checkuserid/2 then still honors the stale impersonator tag, so the connection (including newly opened channels) can continue publishing messages with a foreign AMQP userid after that privilege should have been revoked. A fresh connection using the downgraded token correctly refuses the same publish, proving the defect is stale session state rather than the token Limited to connections that once held impersonator and successfully refresh to a downgraded same-username rabbitauthbackendoauth2 (or an equivalent refresh-capable backend that returns tags) is enabled for This issue is fixed in versions 3.13.19, 4.0.24, 4.1.15, 4.2.10, and 4.3.5. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The shovel management resource's is_authorized/2 delegates to rabbit_mgmt_util:is_authorized_monitor/2, which accepts the monitoring tag. But allowed_methods includes DELETE, and delete_resource/2 deletes / restarts shovel runtime parameters with no additional role check. A monitoring user , intended to have read-only visibility , can therefore delete or restart any shovel in any vhost they can see. A read-only monitoring user can delete or restart any dynamic shovel , a state-changing operation that the equivalent /api/parameters endpoint correctly restricts to policymaker. Preconditions include rabbitmq_shovel + rabbitmq_shovel_management plugins enabled Attacker has credentials with the monitoring tag. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, rabbit_pid_codec:decompose_from_binary/1 parses a caller-supplied ETF-encoded binary and calls binary_to_atom(Node, utf8) on the node-name field. It is reached from rabbit_volatile_queue:pid_from_name/2, which is invoked for any queue name / routing key beginning amq.rabbitmq.reply-to.. The CandidateNodes membership check happens after the atom is created, and the surrounding try/catch cannot reclaim atoms (they are never GC'd). binary_to_existing_atom is not used. Any authenticated AMQP client can crash the entire Erlang VM (all vhosts, all connections) with ~1M cheap requests. Preconditions include Authenticated AMQP 0-9-1 connection to any vhost No per-connection rate limit low enough to make ~1M operations infeasible. This issue is fixed in versions 4.2.7 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15, The content-header BodySize (a uint64) was stored without validation against max_message_size. The size check ran only when assembly completed. By declaring body_size = 2^63-1 and then streaming fragments, a client ensured that check_msg_size never fired, so the accumulated body size went unbounded. A reader process accumulates memory until the memory alarm fires, degrading all publishers cluster-wide, or until the node runs out of memory. The memory alarm provides only partial mitigation, since it is reactive rather than preventive. AMQP 0-9-1 is the most widely used protocol, and any publisher can trigger this condition. Preconditions include Any authenticated AMQP 0-9-1 client with publish permission can exploit this.. This issue is fixed in versions 4.3.0, 4.2.6, 4.1.11, 4.0.20, and 3.13.15. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The cowboy WebSocket options at line 117 set compress => true, enabling RFC 7692 permessage-deflate negotiation. The handler does not set max_frame_size, so cowboy's default of infinity applies. cowlib's cow_ws:parse_payload/9 calls zlib:inflate/2 on the compressed payload with no output-size limit. An attacker can negotiate permessage-deflate during the WebSocket upgrade and send a frame containing a zlib bomb (e.g. 50 KB → 5 GB). Decompression occurs in the connection process before websocket_handle/2 ever sees the MQTT bytes. An unauthenticated attacker can crash a RabbitMQ node running the Web-MQTT plugin by sending a single highly-compressed WebSocket frame (a few KB on the wire) that inflates to gigabytes in memory. The cowboy WebSocket handler decompresses the entire frame before the MQTT CONNECT packet is processed, so no credentials are required. Preconditions include rabbitmq_web_mqtt plugin enabled (not default, but common for browser clients) Network reachability to port 15675/15676 No authentication required. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1, The trace consumer constructs the output path as filename:join(TraceDir, Name ++ ".log") where Name comes from PUT /api/traces/:vhost/:name. No safe_relative_path / traversal check is applied on the write side, while the read side (rabbit_tracing_files.erl) does call rabbit_misc:safe_relative_path/1 , proving the omission is an oversight, not design. The .log suffix is forced and the endpoint requires administrator. A user with the administrator tag can write a .log-suffixed file to an arbitrary filesystem path writable by the rabbitmq user via the tracing plugin's name parameter, e.g. /etc/cron.d/x.log (if writable) or overwrite existing .log files outside the trace directory. Preconditions include rabbitmq_tracing plugin enabled administrator tag Target path writable by rabbitmq OS user. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.11, 4.2.6, and 4.3.0, validate_partitions only checks that the requested partition count is at least 1, with no upper bound. A large count such as lists:seq(0, 500000000) allocates roughly 8GB. Preconditions include The rabbitmq_stream_management plugin must be enabled. The caller needs the management tag and access to the target vhost.. This issue is fixed in versions 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, ?LOG_DEBUG("shutting down Shovel '~ts', ... Shovel state: ~tp", [Name, State]) formats the entire state map. The 'uris' field holds plaintext URIs after credentials_obfuscation:decrypt (called in rabbit_shovel_util:deobfuscated_uris/2). No format_status/1,2 callback exists in rabbit_shovel_worker to redact it. Triggered when an autodelete shovel (src-delete-after = N) completes. With DEBUG logging enabled, autodelete-shovel completion writes the full shovel state map , including decrypted amqp://user:password@host/ URIs , to the broker log file. Preconditions include Shovel plugin enabled with URI-embedded credentials DEBUG log level (non-default) Autodelete shovel configuration Attacker has log read access. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
