| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A use-after-free vulnerability was found in libxml2. This issue occurs when parsing XPath elements under certain circumstances when the XML schematron has the <sch:name path="..."/> schema elements. This flaw allows a malicious actor to craft a malicious XML document used as input for libxml, resulting in the program's crash using libxml or other possible undefined behaviors. |
| There's a vulnerability in podman where an attacker may use the kube play command to overwrite host files when the kube file container a Secrete or a ConfigMap volume mount and such volume contains a symbolic link to a host file path. In a successful attack, the attacker can only control the target file to be overwritten but not the content to be written into the file.
Binary-Affected: podman
Upstream-version-introduced: v4.0.0
Upstream-version-fixed: v5.6.1 |
| BusyBox TLS get_client_hello() reads past the end of the input buffer when parsing a truncated ClientHello message. |
| When the HTTP stream wrapper follows a redirect and the response carries a Location header with an empty value, the redirect code reads one byte past the end of the heap buffer holding the location. The value of that out-of-bounds byte decides which redirect target is built, so a malicious server controls whether the client is sent to the host root or to the current directory. |
| phar_tar_number() parses the octal size field of a TAR header into a uint32_t with no overflow check. The field is 11 octal digits wide and holds values up to 0x1FFFFFFFF, so a size above 0xFFFFFFFF silently wraps. The parser then skips the wrong number of data blocks and interprets attacker-controlled file content as the next TAR header, which lets a crafted archive inject entries that PharData reports and extracts as if they were genuine. |
| A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet. |
| BusyBox passwd/group tokenize() references a stale endpoint pointer after trimming, causing an out-of-bounds write of heap pointers. |
| BusyBox dpkg read_package_field() steps past a NUL terminator on malformed .deb packages, causing an out-of-bounds heap read. |
| BusyBox httpd treats yescrypt ($y$) password hashes as plaintext during Basic Authentication, inverting the authentication check. |
| BusyBox httpd IP deny rules with invalid CIDR prefix lengths fail open, leaving a parsed IP with a zeroed mask so the rule matches no clients. |
| BusyBox romfs volume ID parsing uses unbounded strlen on attacker-controlled metadata, causing a heap buffer overflow when processing crafted filesystem images. |
| A flaw was found in NetworkManager. This local privilege escalation vulnerability exists in NetworkManager's dhclient backend when processing malformed Manufacturer Usage Description (MUD) URLs. A local user can exploit this flaw to escalate privileges by triggering a script via a crafted MUD URL, provided an administrator has explicitly configured NetworkManager to use dhclient. This issue does not affect default configurations of NetworkManager. |
| A flaw was found in sudo. When sudoers rules use NOTBEFORE or NOTAFTER time-based access restrictions with timestamps that omit the trailing 'Z' timezone indicator, the time evaluation relies on the TZ environment variable inherited from the calling user. Because sudo is a setuid-root program, an unprivileged local user can set TZ to an extreme timezone offset to shift the authorization window by up to approximately 25 hours, causing expired rules to be treated as valid. This allows the user to execute commands outside the intended time window. Authentication is not bypassed; only the time-based authorization check is affected. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.2.7 and 4.3.1, rabbit_pid_codec:decompose_from_binary/1 parses a caller-supplied ETF-encoded binary and calls binary_to_atom(Node, utf8) on the node-name field. It is reached from rabbit_volatile_queue:pid_from_name/2, which is invoked for any queue name / routing key beginning amq.rabbitmq.reply-to.. The CandidateNodes membership check happens after the atom is created, and the surrounding try/catch cannot reclaim atoms (they are never GC'd). binary_to_existing_atom is not used. Any authenticated AMQP client can crash the entire Erlang VM (all vhosts, all connections) with ~1M cheap requests. Preconditions include Authenticated AMQP 0-9-1 connection to any vhost No per-connection rate limit low enough to make ~1M operations infeasible. This issue is fixed in versions 4.2.7 and 4.3.1. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.11, 4.2.6, and 4.3.0, validate_partitions only checks that the requested partition count is at least 1, with no upper bound. A large count such as lists:seq(0, 500000000) allocates roughly 8GB. Preconditions include The rabbitmq_stream_management plugin must be enabled. The caller needs the management tag and access to the target vhost.. This issue is fixed in versions 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0, When a binding is created on an x-jms-topic exchange, add_binding/3 reads the rjms_erlang_selector argument and passes it through erl_scan:string/1 then erl_parse:parse_term/1. erl_scan:string/1 interns every atom literal it tokenizes. validate_binding/2 is a no-op (-> ok.), there is no length cap, and the surrounding try/catch cannot reclaim atoms. The Java JMS client compiles selectors client-side, but the server does not enforce this , a raw AMQP client can send arbitrary selector strings. An authenticated low-privilege AMQP user confined to one vhost can crash the entire broker node (cross-tenant DoS) in <100 bind calls. Preconditions include rabbitmq_jms_topic_exchange plugin enabled (bundled; required for any JMS deployment) Authenticated AMQP user with read on an x-jms-topic exchange + write on a queue (or configure to declare both). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.17, 4.0.22, 4.1.13, and 4.2.6, match_origin/1 returned the bare reflected Origin and allowed credentials even when the wildcard "" was configured, so the response echoed the attacker's origin together with Access-Control-Allow-Credentials. The affected code is rabbit_mgmt_cors.erl. When the management plugin is configured with a wildcard CORS origin (cors_allow_origins = ""), the handler reflects the request Origin back in Access-Control-Allow-Origin and also sends Access-Control-Allow-Credentials: true. A malicious web page that a signed-in administrator visits can then use that administrator's cached HTTP Basic credentials to issue authenticated, state-changing requests to the management API. Preconditions include The management plugin is configured with the wildcard cors_allow_origins = "*", which is an explicit operator misconfiguration A target administrator has a cached HTTP Basic-auth session in the browser. This issue is fixed in versions 3.13.17, 4.0.22, 4.1.13, and 4.2.6. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.1.13, 4.2.7, and 4.3.0, is_authorized/2 uses is_authorized_monitor for all methods. DELETE resets rabbit_core_metrics:reset_auth_attempt_metrics(). Impact is cosmetic (counters only, no log erasure), but inconsistent with rabbit_mgmt_wm_reset.erl which requires admin for the analogous operation. A monitoring-tagged user can reset the per-node authentication-attempt counters via DELETE /api/auth/attempts/:node, erasing evidence of brute-force activity. The sibling endpoint wm_reset requires administrator. Preconditions include Management plugin enabled monitoring tag. This issue is fixed in versions 4.1.13, 4.2.7, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, Neither the Web-MQTT handler (deps/rabbitmq_web_mqtt/src/rabbit_web_mqtt_handler.erl:104) nor the Web-STOMP handler (deps/rabbitmq_web_stomp/src/rabbit_web_stomp_handler.erl:102) validates the Origin header on the WebSocket upgrade. Under ssl_cert_login=true, the browser presents the client certificate automatically, so an attacker's JavaScript running in the victim's browser can authenticate as the victim. Preconditions include The non-default configuration use_http_auth=true (Web-STOMP) or ssl_cert_login=true (both plugins) must be enabled. The issue is harmless under the default in-band CONNECT credential configuration.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0, accept_content/2 at line 56 calls rabbit_stream_manager:create_super_stream/... directly after is_authorized (which only checks the management tag + vhost access via is_authorized_vhost). The stream-protocol equivalent (rabbit_stream_reader.erl create_super_stream handler) calls rabbit_stream_utils:check_super_stream_management_permitted/4 which enforces configure on the exchange and each partition queue. The HTTP handler omits this call entirely. A user with management tag and vhost access , but no configure permission on any resource , can create super-streams (an exchange + N partition stream queues + bindings) via the HTTP API. The native stream-protocol path enforces configure on each resource; the HTTP path does not, creating a privilege escalation from 'can view' to 'can create persistent cluster-wide resources.' Preconditions include rabbitmq_stream_management plugin enabled management tag + vhost access (no resource permissions needed). This issue is fixed in versions 4.0.22, 4.1.11, 4.2.6, and 4.3.0. |
