| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NETGEAR FVS318 running firmware 2.4, and possibly other versions, allows remote attackers to bypass the filters using hex encoded URLs, as demonstrated using a hex encoded file extension. |
| Netgear RM-356 and RT-338 series SOHO routers allow remote attackers to cause a denial of service (crash) via a UDP port scan, as demonstrated using nmap. |
| The end-of-life Netgear FVS336Gv2 and FVS336Gv3 are affected by a command injection vulnerability in the Telnet interface. An authenticated and remote attacker can execute arbitrary OS commands as root over Telnet by sending crafted "util backup_configuration" commands. |
| A vulnerability was found in Netgear WN604 up to 20240710. It has been rated as problematic. Affected by this issue is some unknown functionality of the file /downloadFile.php of the component Web Interface. The manipulation of the argument file with the input config leads to information disclosure. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-271052. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Netgear R6900 1.0.1.26_1.0.20. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file upgrade_check.cgi of the component HTTP Header Handler. The manipulation of the argument Content-Length leads to buffer overflow. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. This vulnerability only affects products that are no longer supported by the maintainer. |
| NETGEAR XR1000 before 1.0.0.74, XR1000v2 before 1.1.0.22, and XR500 before 2.3.2.134 allow remote code execution by unauthenticated users. |
| A vulnerability classified as problematic has been found in Netgear WN604 up to 20240719. Affected is an unknown function of the file siteSurvey.php. The manipulation leads to direct request. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The identifier of this vulnerability is VDB-272556. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| A path traversal vulnerability exists in the Netgear SPH200D Skype phone firmware versions <= 1.0.4.80 in its embedded web server. Authenticated attackers can exploit crafted GET requests to access arbitrary files outside the web root by injecting traversal sequences. This can expose sensitive system files and configuration data. |
| A vulnerability was found in Netgear WNCE3001 1.0.0.50. It has been classified as critical. This affects the function http_d of the component HTTP POST Request Handler. The manipulation of the argument Host leads to stack-based buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. |
| NETGEAR DGN1000 before 1.1.00.48 is vulnerable to an authentication bypass vulnerability. A remote and unauthenticated attacker can execute arbitrary operating system commands as root by sending crafted HTTP requests to the setup.cgi endpoint. This vulnerability has been observed to be exploited in the wild since at least 2017 and specifically by the Shadowserver Foundation on 2025-02-06 UTC. |
| An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN1000B model firmware versions 1.1.00.24 and 1.1.00.45) via the TimeToLive parameter in the setup.cgi endpoint. The vulnerability arises from improper input neutralization, enabling command injection through crafted POST requests. This flaw enables remote attackers to deploy payloads or manipulate system state post-authentication. |
| An authenticated OS command injection vulnerability exists in Netgear routers (tested on the DGN2200B model) firmware versions 1.0.0.36 and prior via the pppoe.cgi endpoint. A remote attacker with valid credentials can execute arbitrary commands via crafted input to the pppoe_username parameter. This flaw allows full compromise of the device and may persist across reboots unless configuration is restored. |
| FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, exposes an HTTP server over the LAN interface of affected devices. This interface is vulnerable to unauthenticated arbitrary command injection through the funjsq_access_token parameter. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26. |
| FunJSQ, a third-party module integrated on some NETGEAR routers and Orbi WiFi Systems, does not properly validate TLS certificates when downloading update packages through its auto-update mechanism. An attacker (suitably positioned on the network) could intercept the update request and deliver a malicious update package in order to gain arbitrary code execution on affected devices. This affects R6230 before 1.1.0.112, R6260 before 1.1.0.88, R7000 before 1.0.11.134, R8900 before 1.0.5.42, R9000 before 1.0.5.42, and XR300 before 1.0.3.72 and Orbi RBR20 before 2.7.2.26, RBR50 before 2.7.4.26, RBS20 before 2.7.2.26, and RBS50 before 2.7.4.26. |
| Improper Input Validation vulnerability in NETGEAR R6260 and NETGEAR R6850 allows unauthenticated attackers connected to LAN with ability to perform MiTM attacks and control over DNS Server to perform command execution.This issue affects R6260: through 1.1.0.86; R6850: through 1.1.0.86. |
| Improper certificate
validation in firmware update logic in NETGEAR RAX30 (Nighthawk AX5 5-Stream
AX2400 WiFi 6 Router) and RAXE300 (Nighthawk AXE7800 Tri-Band
WiFi 6E Router) allows attackers with the ability to intercept and
tamper traffic destined to the device to execute arbitrary commands on the
device.
Devices
with automatic updates enabled may already have this patch applied. If not,
please check the firmware version and update to the
latest.
Fixed in:
RAX30 firmware
1.0.14.108 or later.
RAXE300 firmware
1.0.9.82 or later |
| Improper input validation
in NETGEAR DGN2200v4 (N300 Wireless ADSL2+ Modem Router) allows attackers with
direct network access to the device to potentially execute code on the device.
Please check the firmware version and update to the latest.
Fixed
in:
DGN2200v4
firmware 1.0.0.132 or later |
| A vulnerability in the speedtest feature of affected NETGEAR Nighthawk routers, caused by improper input validation, can allow attackers on the router's WAN side, using attacker-in-the-middle techniques (MiTM) to manipulate DNS responses and execute commands when speedtests are run.
This issue affects RS700: through 1.0.7.82; RAX54Sv2 : before V1.1.6.36; RAX41v2: before V1.1.6.36; RAX50: before V1.2.14.114; RAXE500: before V1.2.14.114; RAX41: before V1.0.17.142; RAX43: before V1.0.17.142; RAX35v2: before V1.0.17.142; RAXE450: before V1.2.14.114; RAX43v2: before V1.1.6.36; RAX42: before V1.0.17.142; RAX45: before V1.0.17.142; RAX50v2: before V1.1.6.36; MR90: before V1.0.2.46; MS90: before V1.0.2.46; RAX42v2: before V1.1.6.36; RAX49S: before V1.1.6.36. |
| An issue in Netgear DGN1000WW v.1.1.00.45 allows a remote attacker to execute arbitrary code via the Diagnostics page |
| Denial of Service Vulnerability in NETGEAR C6220 and C6230 (DOCSIS® 3.0 Two-in-one Cable Modem + WiFi Router) allows authenticated local WiFi users reboot the router. |
