| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the FTP inspection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass FTP inspection. The vulnerability is due to ineffective flow tracking of FTP traffic. An attacker could exploit this vulnerability by sending crafted FTP traffic through an affected device. A successful exploit could allow the attacker to bypass FTP inspection and successfully complete FTP connections. |
| A vulnerability in the TCP Intercept functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured Access Control Policies (including Geolocation) and Service Polices on an affected system. The vulnerability exists because TCP Intercept is invoked when the embryonic connection limit is reached, which can cause the underlying detection engine to process the packet incorrectly. An attacker could exploit this vulnerability by sending a crafted stream of traffic that matches a policy on which TCP Intercept is configured. A successful exploit could allow the attacker to match on an incorrect policy, which could allow the traffic to be forwarded when it should be dropped. In addition, the traffic could incorrectly be dropped. |
| A vulnerability in the support tunnel feature of Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, local attacker to access the shell of an affected device even though expert mode is disabled. The vulnerability is due to improper configuration of the support tunnel feature. An attacker could exploit this vulnerability by enabling the support tunnel, setting a key, and deriving the tunnel password. A successful exploit could allow the attacker to run any system command with root access on an affected device. |
| A vulnerability in the application policy configuration of the Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to gain unauthorized read access to sensitive data. The vulnerability is due to insufficient application identification. An attacker could exploit this vulnerability by sending crafted traffic to an affected device. A successful exploit could allow the attacker to gain unauthorized read access to sensitive data. |
| A vulnerability in the detection engine of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, adjacent attacker to send data directly to the kernel of an affected device. The vulnerability exists because the software improperly filters Ethernet frames sent to an affected device. An attacker could exploit this vulnerability by sending crafted packets to the management interface of an affected device. A successful exploit could allow the attacker to bypass the Layer 2 (L2) filters and send data directly to the kernel of the affected device. A malicious frame successfully delivered would make the target device generate a specific syslog entry. |
| A vulnerability in the file policy feature that is used to inspect encrypted archive files of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured file policy to block an encrypted archive file. This vulnerability exists because of a logic error when a specific class of encrypted archive files is inspected. An attacker could exploit this vulnerability by sending a crafted, encrypted archive file through the affected device. A successful exploit could allow the attacker to send an encrypted archive file, which could contain malware and should have been blocked and dropped at the Cisco FTD device. |
| A vulnerability in the IP geolocation rules of Snort 3 could allow an unauthenticated, remote attacker to potentially bypass IP address restrictions. This vulnerability exists because the configuration for IP geolocation rules is not parsed properly. An attacker could exploit this vulnerability by spoofing an IP address until they bypass the restriction. A successful exploit could allow the attacker to bypass location-based IP address restrictions. |
| A vulnerability in the per-user-override feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass an access control list (ACL) that is configured for an interface of an affected device. The vulnerability is due to errors that could occur when the affected software constructs and applies per-user-override rules. An attacker could exploit this vulnerability by connecting to a network through an affected device that has a vulnerable configuration. A successful exploit could allow the attacker to access resources that are behind the affected device and would typically be protected by the interface ACL. |
| Multiple vulnerabilities in the payload inspection for Ethernet Industrial Protocol (ENIP) traffic for Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass configured rules for ENIP traffic. These vulnerabilities are due to incomplete processing during deep packet inspection for ENIP packets. An attacker could exploit these vulnerabilities by sending a crafted ENIP packet to the targeted interface. A successful exploit could allow the attacker to bypass configured access control and intrusion policies that should be activated for the ENIP packet. |
| A vulnerability in the Simple Network Management Protocol version 3 (SNMPv3) access control functionality of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to query SNMP data. This vulnerability is due to ineffective access control. An attacker could exploit this vulnerability by sending an SNMPv3 query to an affected device from a host that is not permitted by the SNMPv3 access control list. A successful exploit could allow the attacker to send an SNMP query to an affected device and retrieve information from the device. The attacker would need valid credentials to perform the SNMP query. |
| A vulnerability in Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to send traffic that should be denied through an affected device.
This vulnerability is due to improper error handling when an affected device that is joining a cluster runs out of memory while replicating access control rules. An attacker could exploit this vulnerability by sending traffic that should be blocked through the device. A successful exploit could allow the attacker to bypass access controls and reach devices in protected networks. |
| A vulnerability in the management access list configuration of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to bypass a configured management interface access list on an affected system. The vulnerability is due to the configuration of different management access lists, with ports allowed in one access list and denied in another. An attacker could exploit this vulnerability by sending crafted remote management traffic to the local IP address of an affected system. A successful exploit could allow the attacker to bypass the configured management access list policies, and traffic to the management interface would not be properly denied. |
| In Eclipse hawkBit versions 1.0.3 and prior, a privilege escalation vulnerability (CWE-284 / CWE-862) has been identified in the Direct Device Integration (DDI) Controller.
This vulnerability allows an authenticated device to escalate its permissions and bypass the strict boundaries of its assigned updates. Under normal operation, a device should be restricted strictly to the specific firmware artifacts explicitly assigned to it. However, this flaw enables any authenticated device to bypass this restriction and download any firmware artifact within the same tenant.
This is not an authentication bypass; the requesting device must possess valid credentials for its respective tenant. Instead, the issue stems from a flaw in object-level authorization validation.
A related, lower-severity helper issue exists in the listing software modules artifacts metadata endpoint. This endpoint does not enforce assignment checks, enabling an authenticated device to list and enumerate available firmware artifacts, which can facilitate targeted exfiltration using the main download authorization bypass. |
| Vulnerability in the Oracle Process Manufacturing Logistics product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Process Manufacturing Logistics. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Process Manufacturing Logistics accessible data as well as unauthorized update, insert or delete access to some of Oracle Process Manufacturing Logistics accessible data. CVSS 3.1 Base Score 7.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:L/A:N). |
| A flaw was found in the Red Hat OpenShift AI (RHOAI) MaaS Gateway. Improper configuration of the Gateway in a model-serving context allows a standard user with low privileges to intercept, read, log, and alter all MaaS model traffic. This includes sensitive information such as access keys, input prompts, and outputs, leading to significant information disclosure and data tampering. |
| A flaw was found in the Dynamic Client Registration (DCR) component of Keycloak, an identity and access management solution. The default DCR policy fails to properly validate the claim path for User Property mappers, allowing them to write values to sensitive internal claim locations. An attacker with a standard user account and a limited Initial Access Token can exploit this to forge administrative roles in their access token. This allows the attacker to take over other clients, steal confidential secrets, and potentially gain full administrative control over the realm. |
| A broken access control vulnerability in Ghost Foundation Ghost 5.x allows authenticated Author-role users to delete posts owned by other users. The post model permissible() cascade is missing the branch that handles the combined isAuthor and isDestroy condition, causing the authorization check to fall through and permit the deletion. An attacker with an Author account can delete any post on the platform. |
| EIPStackGroup OpENer 2.3.0 (commit 76b95cf) suffers from an Incorrect Access Control vulnerability in its handling of encapsulation sessions. When the server processes critical encapsulation commands, it verifies whether the provided session_handle exists in the global session list, but it fails to verify whether that handle belongs to the specific TCP connection issuing the request. Because there is no strong binding between a session handle and its originating socket, any attacker on the network can use a valid session handle created by another legitimate client to bypass access controls. |
| The Advanced Classifieds & Directory Pro Advanced Classifieds & Directory Pro WordPress plugin before 3.4.3 (<= 3.4.2) is vulnerable to unauthenticated sensitive information exposure via the AJAX action `acadp_public_custom_fields_listings`. |
| Vulnerability in the Oracle Product Workbench product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Product Workbench. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Product Workbench accessible data as well as unauthorized access to critical data or complete access to all Oracle Product Workbench accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:N). |
