Export limit exceeded: 92759 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (92759 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40820 | 1 Siemens | 16 Sidoor Atd430w, Sidoor Ate530s Coated, Simatic and 13 more | 2026-04-15 | 7.5 High |
| Affected products do not properly enforce TCP sequence number validation in specific scenarios but accept values within a broad range. This could allow an unauthenticated remote attacker e.g. to interfere with connection setup, potentially leading to a denial of service. The attack succeeds only if an attacker can inject IP packets with spoofed addresses at precisely timed moments, and it affects only TCP-based services. | ||||
| CVE-2025-40827 | 1 Siemens | 2 Software Center, Solid Edge Se2025 | 2026-04-15 | 7.8 High |
| A vulnerability has been identified in Siemens Software Center (All versions < V3.5), Solid Edge SE2025 (All versions < V225.0 Update 10). The affected application is vulnerable to DLL hijacking. This could allow an attacker to execute arbitrary code via placing a crafted DLL file on the system. | ||||
| CVE-2025-48387 | 1 Redhat | 1 Rhdh | 2026-04-15 | 7.3 High |
| tar-fs provides filesystem bindings for tar-stream. Versions prior to 3.0.9, 2.1.3, and 1.16.5 have an issue where an extract can write outside the specified dir with a specific tarball. This has been patched in versions 3.0.9, 2.1.3, and 1.16.5. As a workaround, use the ignore option to ignore non files/directories. | ||||
| CVE-2025-48385 | 1 Git | 1 Git | 2026-04-15 | 8.3 High |
| Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals. When cloning a repository Git knows to optionally fetch a bundle advertised by the remote server, which allows the server-side to offload parts of the clone to a CDN. The Git client does not perform sufficient validation of the advertised bundles, which allows the remote side to perform protocol injection. This protocol injection can cause the client to write the fetched bundle to a location controlled by the adversary. The fetched content is fully controlled by the server, which can in the worst case lead to arbitrary code execution. The use of bundle URIs is not enabled by default and can be controlled by the bundle.heuristic config option. Some cases of the vulnerability require that the adversary is in control of where a repository will be cloned to. This either requires social engineering or a recursive clone with submodules. These cases can thus be avoided by disabling recursive clones. This vulnerability is fixed in v2.43.7, v2.44.4, v2.45.4, v2.46.4, v2.47.3, v2.48.2, v2.49.1, and v2.50.1. | ||||
| CVE-2025-48383 | 2026-04-15 | 8.2 High | ||
| Django-Select2 is a Django integration for Select2. Prior to version 8.4.1, instances of HeavySelect2Mixin subclasses like the ModelSelect2MultipleWidget and ModelSelect2Widget can leak secret access tokens across requests. This can allow users to access restricted query sets and restricted data. This issue has been patched in version 8.4.1. | ||||
| CVE-2025-48396 | 1 Eaton | 1 Brightlayer Software Suite | 2026-04-15 | 8.3 High |
| Arbitrary code execution is possible due to improper validation of the file upload functionality in Eaton BLSS. This security issue has been fixed in the latest script patch latest version of of Eaton BLSS (7.3.0.SCP004). | ||||
| CVE-2025-40890 | 1 Nozomi Networks | 2 Cmc, Guardian | 2026-04-15 | 7.9 High |
| A Stored Cross-Site Scripting vulnerability was discovered in the Dashboards functionality due to improper validation of an input parameter. An authenticated low-privilege user can craft a malicious dashboard containing a JavaScript payload and share it with victim users, or a victim can be socially engineered to import a malicious dashboard template. When the victim views or imports the dashboard, the XSS executes in their browser context, allowing the attacker to perform unauthorized actions as the victim, such as modify application data, disrupt application availability, and access limited sensitive information. | ||||
| CVE-2025-32786 | 1 Glpi-project | 1 Glpi Inventory | 2026-04-15 | 7.5 High |
| The GLPI Inventory Plugin handles network discovery, inventory, software deployment, and data collection for GLPI agents. Versions 1.5.0 and below are vulnerable to SQL Injection. This issue is fixed in version 1.5.1. | ||||
| CVE-2025-32780 | 1 Bleachbit | 1 Bleachbit | 2026-04-15 | 7.3 High |
| BleachBit cleans files to free disk space and to maintain privacy. BleachBit for Windows up to version 4.6.2 is vulnerable to a DLL Hijacking vulnerability. By placing a malicious DLL with the name uuid.dll in the folder C:\Users\<username>\AppData\Local\Microsoft\WindowsApps\, an attacker can execute arbitrary code every time BleachBit is run. This issue has been patched in version 4.9.0. | ||||
| CVE-2025-40915 | 2026-04-15 | 7 High | ||
| Mojolicious::Plugin::CSRF 1.03 for Perl uses a weak random number source for generating CSRF tokens. That version of the module generates tokens as an MD5 of the process id, the current time, and a single call to the built-in rand() function. | ||||
| CVE-2025-40920 | 1 Perl | 1 Catalyst Authentication Credential Http | 2026-04-15 | 8.6 High |
| Catalyst::Authentication::Credential::HTTP versions 1.018 and earlier for Perl generate nonces using the Perl Data::UUID library. * Data::UUID does not use a strong cryptographic source for generating UUIDs. * Data::UUID returns v3 UUIDs, which are generated from known information and are unsuitable for security, as per RFC 9562. * The nonces should be generated from a strong cryptographic source, as per RFC 7616. | ||||
| CVE-2025-40923 | 2026-04-15 | 7.3 High | ||
| Plack-Middleware-Session before version 0.35 for Perl generates session ids insecurely. The default session id generator returns a SHA-1 hash seeded with the built-in rand function, the epoch time, and the PID. The PID will come from a small set of numbers, and the epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage. Predicable session ids could allow an attacker to gain access to systems. | ||||
| CVE-2025-40927 | 2026-04-15 | 7.3 High | ||
| CGI::Simple versions before 1.282 for Perl has a HTTP response splitting flaw This vulnerability is a confirmed HTTP response splitting flaw in CGI::Simple that allows HTTP response header injection, which can be used for reflected XSS or open redirect under certain conditions. Although some validation exists, it can be bypassed using URL-encoded values, allowing an attacker to inject untrusted content into the response via query parameters. As a result, an attacker can inject a line break (e.g. %0A) into the parameter value, causing the server to split the HTTP response and inject arbitrary headers or even an HTML/JavaScript body, leading to reflected cross-site scripting (XSS), open redirect or other attacks. The issue documented in CVE-2010-4410 https://www.cve.org/CVERecord?id=CVE-2010-4410 is related but the fix was incomplete. Impact By injecting %0A (newline) into a query string parameter, an attacker can: * Break the current HTTP header * Inject a new header or entire body * Deliver a script payload that is reflected in the server’s response That can lead to the following attacks: * reflected XSS * open redirect * cache poisoning * header manipulation | ||||
| CVE-2025-40928 | 2026-04-15 | 7.5 High | ||
| JSON::XS before version 4.04 for Perl has an integer buffer overflow causing a segfault when parsing crafted JSON, enabling denial-of-service attacks or other unspecified impact | ||||
| CVE-2025-40930 | 2026-04-15 | 7.5 High | ||
| JSON::SIMD before version 1.07 and earlier for Perl has an integer buffer overflow causing a segfault when parsing crafted JSON, enabling denial-of-service attacks or other unspecified impact. | ||||
| CVE-2025-40933 | 2026-04-15 | 7.5 High | ||
| Apache::AuthAny::Cookie v0.201 or earlier for Perl generates session ids insecurely. Session ids are generated using an MD5 hash of the epoch time and a call to the built-in rand function. The epoch time may be guessed, if it is not leaked from the HTTP Date header. The built-in rand function is unsuitable for cryptographic usage. Predicable session ids could allow an attacker to gain access to systems. | ||||
| CVE-2025-4103 | 1 Wordpress | 1 Wordpress | 2026-04-15 | 8.8 High |
| The WP-GeoMeta plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the wp_ajax_wpgm_start_geojson_import() function in versions 0.3.4 to 0.3.5. This makes it possible for authenticated attackers, with Subscriber-level access and above, to elevate their privileges to that of an administrator. | ||||
| CVE-2025-41224 | 2026-04-15 | 8.8 High | ||
| A vulnerability has been identified in RUGGEDCOM RMC8388 V5.X (All versions < V5.10.0), RUGGEDCOM RMC8388NC V5.X (All versions < V5.10.0), RUGGEDCOM RS416NCv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416PNCv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416Pv2 V5.X (All versions < V5.10.0), RUGGEDCOM RS416v2 V5.X (All versions < V5.10.0), RUGGEDCOM RS900 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900G (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900GNC(32M) V5.X (All versions < V5.10.0), RUGGEDCOM RS900NC(32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100 (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100NC(32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100P (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2100PNC (32M) V5.X (All versions < V5.10.0), RUGGEDCOM RSG2288 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2288NC V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300NC V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300P V5.X (All versions < V5.10.0), RUGGEDCOM RSG2300PNC V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488 V5.X (All versions < V5.10.0), RUGGEDCOM RSG2488NC V5.X (All versions < V5.10.0), RUGGEDCOM RSG907R (All versions < V5.10.0), RUGGEDCOM RSG908C (All versions < V5.10.0), RUGGEDCOM RSG909R (All versions < V5.10.0), RUGGEDCOM RSG910C (All versions < V5.10.0), RUGGEDCOM RSG920P V5.X (All versions < V5.10.0), RUGGEDCOM RSG920PNC V5.X (All versions < V5.10.0), RUGGEDCOM RSL910 (All versions < V5.10.0), RUGGEDCOM RSL910NC (All versions < V5.10.0), RUGGEDCOM RST2228 (All versions < V5.10.0), RUGGEDCOM RST2228P (All versions < V5.10.0), RUGGEDCOM RST916C (All versions < V5.10.0), RUGGEDCOM RST916P (All versions < V5.10.0). The affected products do not properly enforce interface access restrictions when changing from management to non-management interface configurations until a system reboot occurs, despite configuration being saved. This could allow an attacker with network access and credentials to gain access to device through non-management and maintain SSH access to the device until reboot. | ||||
| CVE-2025-41225 | 1 Vmware | 1 Vcenter Server | 2026-04-15 | 8.8 High |
| The vCenter Server contains an authenticated command-execution vulnerability. A malicious actor with privileges to create or modify alarms and run script action may exploit this issue to run arbitrary commands on the vCenter Server. | ||||
| CVE-2025-41229 | 1 Vmware | 1 Cloud Foundation | 2026-04-15 | 8.2 High |
| VMware Cloud Foundation contains a directory traversal vulnerability. A malicious actor with network access to port 443 on VMware Cloud Foundation may exploit this issue to access certain internal services. | ||||