Export limit exceeded: 16161 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (16161 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-20053 | 1 Intel | 3 Processor, Xeon, Xeon Processors | 2026-04-15 | 7.2 High |
| Improper buffer restrictions for some Intel(R) Xeon(R) Processor firmware with SGX enabled may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-20010 | 1 Intel | 1 Processor Identification Utility | 2026-04-15 | 7.8 High |
| Use of unmaintained third party components for some Intel(R) Processor Identification Utility before version 8.0.43 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with an authenticated user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (high), integrity (high) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. | ||||
| CVE-2025-1866 | 2026-04-15 | 8.0 High | ||
| Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability in warmcat libwebsockets allows Pointer Manipulation, potentially leading to out-of-bounds memory access. This issue affects libwebsockets before 4.3.4 and is present in code built specifically for the Win32 platform. By default, the affected code is not executed unless one of the following conditions is met: LWS_WITHOUT_EXTENSIONS (default ON) is manually set to OFF in CMake. LWS_WITH_HTTP_STREAM_COMPRESSION (default OFF) is manually set to ON in CMake. Despite these conditions, when triggered in affected configurations, this vulnerability may allow attackers to manipulate pointers, potentially leading to memory corruption or unexpected behavior. | ||||
| CVE-2025-1863 | 2026-04-15 | 9.8 Critical | ||
| Insecure default settings have been found in recorder products provided by Yokogawa Electric Corporation. The default setting of the authentication function is disabled on the affected products. Therefore, when connected to a network with default settings, anyone can access all functions related to settings and operations. As a result, an attacker can illegally manipulate and configure important data such as measured values and settings. This issue affects GX10 / GX20 / GP10 / GP20 Paperless Recorders: R5.04.01 or earlier; GM Data Acquisition System: R5.05.01 or earlier; DX1000 / DX2000 / DX1000N Paperless Recorders: R4.21 or earlier; FX1000 Paperless Recorders: R1.31 or earlier; μR10000 / μR20000 Chart Recorders: R1.51 or earlier; MW100 Data Acquisition Units: All versions; DX1000T / DX2000T Paperless Recorders: All versions; CX1000 / CX2000 Paperless Recorders: All versions. | ||||
| CVE-2025-15506 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in AcademySoftwareFoundation OpenColorIO up to 2.5.0. This issue affects the function ConvertToRegularExpression of the file src/OpenColorIO/FileRules.cpp. Performing a manipulation results in out-of-bounds read. The attack needs to be approached locally. The exploit has been made public and could be used. The patch is named ebdbb75123c9d5f4643e041314e2bc988a13f20d. To fix this issue, it is recommended to deploy a patch. The fix was added to the 2.5.1 milestone. | ||||
| CVE-2025-11947 | 1 Bftpd | 1 Bftpd | 2026-04-15 | 4.5 Medium |
| A weakness has been identified in bftpd up to 6.2. Impacted is the function expand_groups of the file options.c of the component Configuration File Handler. Executing a manipulation can lead to heap-based buffer overflow. It is possible to launch the attack on the local host. Attacks of this nature are highly complex. The exploitability is considered difficult. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-11085 | 1 Rockwellautomation | 1 Factorytalk | 2026-04-15 | N/A |
| A security issue exists within DataMosaix™ Private Cloud allowing for Persistent XSS. This vulnerability can result in the execution of malicious JavaScript, allowing for account takeover, credential theft, or redirection to a malicious website. | ||||
| CVE-2025-11015 | 1 Ogrecave | 1 Ogre | 2026-04-15 | 5.3 Medium |
| A weakness has been identified in OGRECave Ogre up to 14.4.1. Impacted is the function STBIImageCodec::encode of the file /ogre/PlugIns/STBICodec/src/OgreSTBICodec.cpp. This manipulation causes mismatched memory management routines. The attack is restricted to local execution. The exploit has been made available to the public and could be exploited. | ||||
| CVE-2025-11010 | 1 Vstakhov | 1 Libucl | 2026-04-15 | 5.3 Medium |
| A vulnerability has been found in vstakhov libucl up to 0.9.2. Affected by this vulnerability is the function ucl_include_common of the file /src/ucl_util.c. Such manipulation leads to heap-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2024-9684 | 1 Freyrscada | 1 Iec-60879-5-104 Server Simulator | 2026-04-15 | 7.5 High |
| FreyrSCADA/IEC-60870-5-104 server v21.06.008 allows remote attackers to cause a denial of service by sending specific message sequences. | ||||
| CVE-2024-9427 | 2026-04-15 | 5.4 Medium | ||
| A vulnerability in Koji was found. An unsanitized input allows for an XSS attack. Javascript code from a malicious link could be reflected in the resulting web page. It is not expected to be able to submit an action or make a change in Koji due to existing XSS protections in the code | ||||
| CVE-2024-9348 | 1 Docker | 1 Desktop | 2026-04-15 | N/A |
| Docker Desktop before v4.34.3 allows RCE via unsanitized GitHub source link in Build view. | ||||
| CVE-2025-7353 | 1 Rockwellautomation | 1 Controllogix | 2026-04-15 | N/A |
| A security issue exists due to the web-based debugger agent enabled on Rockwell Automation ControlLogix® Ethernet Modules. If a specific IP address is used to connect to the WDB agent, it can allow remote attackers to perform memory dumps, modify memory, and control execution flow. | ||||
| CVE-2025-7213 | 1 Fnkvision | 1 Fnk-gu2 | 2026-04-15 | 6.4 Medium |
| A vulnerability classified as critical has been found in FNKvision FNK-GU2 up to 40.1.7. Affected is an unknown function of the component UART Interface. The manipulation leads to on-chip debug and test interface with improper access control. It is possible to launch the attack on the physical device. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-6494 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833. It has been classified as problematic. This affects the function hashmap_get_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The patch is named ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. | ||||
| CVE-2025-6490 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in sparklemotion nokogiri c29c920907366cb74af13b4dc2230e9c9e23b833 and classified as problematic. This issue affects the function hashmap_set_with_hash of the file gumbo-parser/src/hashmap.c. The manipulation leads to heap-based buffer overflow. An attack has to be approached locally. The exploit has been disclosed to the public and may be used. The real existence of this vulnerability is still doubted at the moment. The identifier of the patch is ada4708e5a67114402cd3feb70a4e1d1d7cf773a. It is recommended to apply a patch to fix this issue. The project maintainer explains that the affected code was merged into the main branch but the commit never appeared in an official release. | ||||
| CVE-2025-61773 | 1 Pyload | 1 Pyload | 2026-04-15 | 8.1 High |
| pyLoad is a free and open-source download manager written in Python. In versions prior to 0.5.0b3.dev91, pyLoad web interface contained insufficient input validation in both the Captcha script endpoint and the Click'N'Load (CNL) Blueprint. This flaw allowed untrusted user input to be processed unsafely, which could be exploited by an attacker to inject arbitrary content into the web UI or manipulate request handling. The vulnerability could lead to client-side code execution (XSS) or other unintended behaviors when a malicious payload is submitted. user-supplied parameters from HTTP requests were not adequately validated or sanitized before being passed into the application logic and response generation. This allowed crafted input to alter the expected execution flow. CNL (Click'N'Load) blueprint exposed unsafe handling of untrusted parameters in HTTP requests. The application did not consistently enforce input validation or encoding, making it possible for an attacker to craft malicious requests. Version 0.5.0b3.dev91 contains a patch for the issue. | ||||
| CVE-2025-61689 | 2026-04-15 | N/A | ||
| HTTP.jl is an HTTP client and server functionality for the Julia programming language. Prior to version 1.10.19, HTTP.jl did not validate header names/values for illegal characters, allowing CRLF-based header injection and response splitting. This enables HTTP response splitting and header injection, leading to cache poisoning, XSS, session fixation, and more. This issue is fixed in HTTP.jl `v1.10.19`. | ||||
| CVE-2025-57564 | 1 Cubeapm | 1 Cubeapm | 2026-04-15 | 8.2 High |
| CubeAPM nightly-2025-08-01-1 allow unauthenticated attackers to inject arbitrary log entries into production systems via the /api/logs/insert/elasticsearch/_bulk endpoint. This endpoint accepts bulk log data without requiring authentication or input validation, allowing remote attackers to perform unauthorized log injection. Exploitation may lead to false log entries, log poisoning, alert obfuscation, and potential performance degradation of the observability pipeline. The issue is present in the core CubeAPM platform and is not limited to specific deployment configurations. | ||||
| CVE-2025-5640 | 2026-04-15 | 3.3 Low | ||
| A vulnerability was found in PX4-Autopilot 1.12.3. It has been classified as problematic. This affects the function MavlinkReceiver::handle_message_trajectory_representation_waypoints of the file mavlink_receiver.cpp of the component TRAJECTORY_REPRESENTATION_WAYPOINTS Message Handler. The manipulation leads to stack-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. | ||||