| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: lkkbd - disable pending work before freeing device
lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work
handler lkkbd_reinit() dereferences the lkkbd structure and its
serio/input_dev fields.
lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd
structure without preventing the reinit work from being queued again
until serio_close() returns. This can allow the work handler to run
after the structure has been freed, leading to a potential use-after-free.
Use disable_work_sync() instead of cancel_work_sync() to ensure the
reinit work cannot be re-queued, and call it both in lkkbd_disconnect()
and in lkkbd_connect() error paths after serio_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: rose: fix invalid array index in rose_kill_by_device()
rose_kill_by_device() collects sockets into a local array[] and then
iterates over them to disconnect sockets bound to a device being brought
down.
The loop mistakenly indexes array[cnt] instead of array[i]. For cnt <
ARRAY_SIZE(array), this reads an uninitialized entry; for cnt ==
ARRAY_SIZE(array), it is an out-of-bounds read. Either case can lead to
an invalid socket pointer dereference and also leaks references taken
via sock_hold().
Fix the index to use i. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: hp-bioscfg: Fix out-of-bounds array access in ACPI package parsing
The hp_populate_*_elements_from_package() functions in the hp-bioscfg
driver contain out-of-bounds array access vulnerabilities.
These functions parse ACPI packages into internal data structures using
a for loop with index variable 'elem' that iterates through
enum_obj/integer_obj/order_obj/password_obj/string_obj arrays.
When processing multi-element fields like PREREQUISITES and
ENUM_POSSIBLE_VALUES, these functions read multiple consecutive array
elements using expressions like 'enum_obj[elem + reqs]' and
'enum_obj[elem + pos_values]' within nested loops.
The bug is that the bounds check only validated elem, but did not consider
the additional offset when accessing elem + reqs or elem + pos_values.
The fix changes the bounds check to validate the actual accessed index. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd/selftest: Check for overflow in IOMMU_TEST_OP_ADD_RESERVED
syzkaller found it could overflow math in the test infrastructure and
cause a WARN_ON by corrupting the reserved interval tree. This only
effects test kernels with CONFIG_IOMMUFD_TEST.
Validate the user input length in the test ioctl. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix string copying in parse_apply_sb_mount_options()
strscpy_pad() can't be used to copy a non-NUL-term string into a NUL-term
string of possibly bigger size. Commit 0efc5990bca5 ("string.h: Introduce
memtostr() and memtostr_pad()") provides additional information in that
regard. So if this happens, the following warning is observed:
strnlen: detected buffer overflow: 65 byte read of buffer size 64
WARNING: CPU: 0 PID: 28655 at lib/string_helpers.c:1032 __fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Modules linked in:
CPU: 0 UID: 0 PID: 28655 Comm: syz-executor.3 Not tainted 6.12.54-syzkaller-00144-g5f0270f1ba00 #0
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__fortify_report+0x96/0xc0 lib/string_helpers.c:1032
Call Trace:
<TASK>
__fortify_panic+0x1f/0x30 lib/string_helpers.c:1039
strnlen include/linux/fortify-string.h:235 [inline]
sized_strscpy include/linux/fortify-string.h:309 [inline]
parse_apply_sb_mount_options fs/ext4/super.c:2504 [inline]
__ext4_fill_super fs/ext4/super.c:5261 [inline]
ext4_fill_super+0x3c35/0xad00 fs/ext4/super.c:5706
get_tree_bdev_flags+0x387/0x620 fs/super.c:1636
vfs_get_tree+0x93/0x380 fs/super.c:1814
do_new_mount fs/namespace.c:3553 [inline]
path_mount+0x6ae/0x1f70 fs/namespace.c:3880
do_mount fs/namespace.c:3893 [inline]
__do_sys_mount fs/namespace.c:4103 [inline]
__se_sys_mount fs/namespace.c:4080 [inline]
__x64_sys_mount+0x280/0x300 fs/namespace.c:4080
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x64/0x140 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Since userspace is expected to provide s_mount_opts field to be at most 63
characters long with the ending byte being NUL-term, use a 64-byte buffer
which matches the size of s_mount_opts, so that strscpy_pad() does its job
properly. Return with error if the user still managed to provide a
non-NUL-term string here.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| An input validation vulnerability was reported in the DeviceSettingsSystemAddin used in Lenovo Vantage and Lenovo Baiying that could allow a local authenticated user to modify arbitrary registry keys with elevated privileges. |
| An input validation vulnerability was reported in the DeviceSettingsSystemAddin used in Lenovo Vantage and Lenovo Baiying that could allow a local authenticated user to delete arbitrary registry keys with elevated privileges. |
| In the Linux kernel, the following vulnerability has been resolved:
media: adv7842: Avoid possible out-of-bounds array accesses in adv7842_cp_log_status()
It's possible for cp_read() and hdmi_read() to return -EIO. Those
values are further used as indexes for accessing arrays.
Fix that by checking return values where it's needed.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: fix "UBSAN: shift-out-of-bounds error"
This patch ensures that the RX ring size (rx_pending) is not
set below the permitted length. This avoids UBSAN
shift-out-of-bounds errors when users passes small or zero
ring sizes via ethtool -G. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: samsung: exynos-clkout: Assign .num before accessing .hws
Commit f316cdff8d67 ("clk: Annotate struct clk_hw_onecell_data with
__counted_by") annotated the hws member of 'struct clk_hw_onecell_data'
with __counted_by, which informs the bounds sanitizer (UBSAN_BOUNDS)
about the number of elements in .hws[], so that it can warn when .hws[]
is accessed out of bounds. As noted in that change, the __counted_by
member must be initialized with the number of elements before the first
array access happens, otherwise there will be a warning from each access
prior to the initialization because the number of elements is zero. This
occurs in exynos_clkout_probe() due to .num being assigned after .hws[]
has been accessed:
UBSAN: array-index-out-of-bounds in drivers/clk/samsung/clk-exynos-clkout.c:178:18
index 0 is out of range for type 'clk_hw *[*]'
Move the .num initialization to before the first access of .hws[],
clearing up the warning. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Fix OOB write in bnxt_re_copy_err_stats()
Commit ef56081d1864 ("RDMA/bnxt_re: RoCE related hardware counters
update") added three new counters and placed them after
BNXT_RE_OUT_OF_SEQ_ERR.
BNXT_RE_OUT_OF_SEQ_ERR acts as a boundary marker for allocating hardware
statistics with different num_counters values on chip_gen_p5_p7 devices.
As a result, BNXT_RE_NUM_STD_COUNTERS are used when allocating
hw_stats, which leads to an out-of-bounds write in
bnxt_re_copy_err_stats().
The counters BNXT_RE_REQ_CQE_ERROR, BNXT_RE_RESP_CQE_ERROR, and
BNXT_RE_RESP_REMOTE_ACCESS_ERRS are applicable to generic hardware, not
only p5/p7 devices.
Fix this by moving these counters before BNXT_RE_OUT_OF_SEQ_ERR so they
are included in the generic counter set. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix potential UAF in xe_oa_add_config_ioctl()
In xe_oa_add_config_ioctl(), we accessed oa_config->id after dropping
metrics_lock. Since this lock protects the lifetime of oa_config, an
attacker could guess the id and call xe_oa_remove_config_ioctl() with
perfect timing, freeing oa_config before we dereference it, leading to
a potential use-after-free.
Fix this by caching the id in a local variable while holding the lock.
v2: (Matt A)
- Dropped mutex_unlock(&oa->metrics_lock) ordering change from
xe_oa_remove_config_ioctl()
(cherry picked from commit 28aeaed130e8e587fd1b73b6d66ca41ccc5a1a31) |
| OpenClaw versions prior to 2026.2.25 contain an authentication bypass vulnerability in the trusted-proxy Control UI pairing mechanism that accepts client.id=control-ui without proper device identity verification. An authenticated node role websocket client can exploit this by using the control-ui client identifier to skip pairing requirements and gain unauthorized access to node event execution flows. |
| OpenClaw versions prior to 2026.2.21 contain an authentication bypass vulnerability in the Control UI when allowInsecureAuth is explicitly enabled and the gateway is exposed over plaintext HTTP, allowing attackers to bypass device identity and pairing verification. An attacker with leaked or intercepted credentials can obtain high-privilege Control UI access by exploiting the lack of secure authentication enforcement over unencrypted HTTP connections. |
| OpenClaw versions prior to 2026.2.22 contain an arbitrary shell execution vulnerability in shell environment fallback that trusts the unvalidated SHELL path from the host environment. An attacker with local environment access can inject a malicious SHELL variable to execute arbitrary commands with the privileges of the OpenClaw process. |
| OpenClaw versions prior to 2026.2.19 contain a path traversal vulnerability in the stageSandboxMedia function that accepts arbitrary absolute paths when iMessage remote attachment fetching is enabled. An attacker who can tamper with attachment path metadata can disclose files readable by the OpenClaw process on the configured remote host via SCP. |
| OpenClaw versions prior to 2026.2.24 contain an approval gating bypass vulnerability in system.run allowlist mode where nested transparent dispatch wrappers can suppress shell-wrapper detection. Attackers can exploit this by chaining multiple dispatch wrappers like /usr/bin/env to execute /bin/sh -c commands without triggering the expected approval prompt in allowlist plus ask=on-miss configurations. |
| OpenClaw versions prior to 2026.2.19 contain an allowlist bypass vulnerability in the exec safeBins policy that allows attackers to write arbitrary files using short-option payloads. Attackers can bypass argument validation by attaching short options like -o to whitelisted binaries, enabling unauthorized file-write operations that should be denied by safeBins checks. |
| OpenClaw versions prior to 2026.2.22 on macOS contain a path validation bypass vulnerability in the exec-approval allowlist mode that allows local attackers to execute unauthorized binaries by exploiting basename-only allowlist entries. Attackers can execute same-name local binaries ./echo without approval when security=allowlist and ask=on-miss are configured, bypassing intended path-based policy restrictions. |
| OpenClaw versions 2026.1.21 prior to 2026.2.19 contain a path hijacking vulnerability in tools.exec.safeBins that allows attackers to bypass allowlist checks by controlling process PATH resolution. Attackers who can influence the gateway process PATH or launch environment can execute trojan binaries with allowlisted names, such as jq, circumventing executable validation controls. |
