Export limit exceeded: 377282 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21629 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-62899 | 3 Apple, Linux, Microsoft | 6 Macos, Linux Kernel, .net and 3 more | 2026-08-14 | 5.9 Medium |
| Inconsistent interpretation of http requests ('http request/response smuggling') in .NET allows an unauthorized attacker to bypass a security feature over a network. | ||||
| CVE-2026-62900 | 3 Apple, Linux, Microsoft | 6 Macos, Linux Kernel, .net and 3 more | 2026-08-14 | 5.9 Medium |
| Improper removal of sensitive information before storage or transfer in .NET allows an unauthorized attacker to disclose information over a network. | ||||
| CVE-2026-62901 | 3 Apple, Linux, Microsoft | 6 Macos, Linux Kernel, .net and 3 more | 2026-08-14 | 7.5 High |
| Unchecked input for loop condition in .NET allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-62909 | 3 Apple, Linux, Microsoft | 6 Macos, Linux Kernel, .net and 3 more | 2026-08-14 | 7.8 High |
| Uncaught exception in .NET allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-58641 | 3 Apple, Linux, Microsoft | 4 Macos, Linux Kernel, .net and 1 more | 2026-08-14 | 7.8 High |
| Integer overflow or wraparound in .NET allows an unauthorized attacker to elevate privileges locally. | ||||
| CVE-2026-53202 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/ivpu: Fix signed integer truncation in IPC receive Fix potential buffer overflow where firmware-supplied data_size is cast to signed int before being used in min_t(). Large unsigned values (>= 0x80000000) become negative, causing unsigned wraparound and oversized memcpy operations that can overflow the stack buffer. Change min_t(int, ...) to min() as both values are unsigned and can be handled by min() without explicit cast. | ||||
| CVE-2026-53175 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: inet: frags: fix use-after-free caused by the fqdir_pre_exit() flush On netns teardown, fqdir_pre_exit() walks the fqdir rhashtable and flushes every fragment queue that is not yet complete using inet_frag_queue_flush(). That helper frees all the skbs queued on the fragment queue but does not set INET_FRAG_COMPLETE, and leaves q->fragments_tail and q->last_run_head pointing at the freed skbs. The queue itself stays in the rhashtable. fqdir_pre_exit() first lowers high_thresh to 0 to stop new queue lookups, but it cannot stop a fragment that already obtained the queue through inet_frag_find() earlier and stalled just before taking the queue lock. Once that fragment resumes after the flush and takes the queue lock, it passes the INET_FRAG_COMPLETE check and then dereferences the freed fragments_tail. inet_frag_queue_insert() reads FRAG_CB() and ->len of that pointer and, on the append path, writes ->next_frag, causing a slab use-after-free. IPv6, nf_conntrack_reasm6 and 6lowpan reassembly share the same flush path and are affected as well. Reset rb_fragments, fragments_tail and last_run_head in inet_frag_queue_flush() so a flushed queue no longer points at the freed skbs. A fragment that resumes after the flush and takes the queue lock then finds an empty queue and starts a new run instead of dereferencing the freed fragments_tail. ip_frag_reinit() already performed this reset after its own flush, so drop the now duplicate code there. | ||||
| CVE-2026-62871 | 3 Apple, Linux, Microsoft | 8 Macos, Linux Kernel, .net and 5 more | 2026-08-14 | 7.8 High |
| Out-of-bounds write in .NET allows an unauthorized attacker to execute code locally. | ||||
| CVE-2026-68082 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ] | ||||
| CVE-2026-68097 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ACE size against SID sub-authorities set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but does not verify that the declared ACE size contains all sub-authorities described by that field. An undersized ACE can therefore be copied and later make the POSIX ACL deduplication walk inspect data beyond the copied ACE boundary. The existing initial bound check is also too small. It only ensures that the ACE size field is accessible before set_ntacl_dacl() reads sid.num_subauth farther into the input buffer. Require enough input for the fixed SID header before accessing num_subauth, reject ACEs smaller than that header, and skip ACEs whose declared size cannot contain the complete SID. This makes the validation consistent with the other ACE walk paths. | ||||
| CVE-2026-68192 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: make release_scratchbuffers idempotent brcmf_pcie_release_scratchbuffers() frees the shared.scratch and shared.ringupd DMA buffers with dma_free_coherent() but does not clear the pointers afterwards, unlike the sibling release_ringbuffers() which NULLs commonrings/flowrings/idxbuf on release. Both the bus_reset .reset callback (brcmf_pcie_reset) and brcmf_pcie_remove() call release_scratchbuffers. When reset teardown has run before removal, remove's own teardown would call dma_free_coherent() a second time on the already-freed DMA allocation. NULL the pointers after free, matching release_ringbuffers(), so a later release observes that the allocation has already been released. This patch makes repeated sequential release safe; the reset-work lifetime is handled separately by the following patch. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-43488 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: xhci: Prevent interrupt storm on host controller error (HCE) The xHCI controller reports a Host Controller Error (HCE) in UAS Storage Device plug/unplug scenarios on Android devices. HCE is checked in xhci_irq() function and causes an interrupt storm (since the interrupt isn’t cleared), leading to severe system-level faults. When the xHC controller reports HCE in the interrupt handler, the driver only logs a warning and assumes xHC activity will stop as stated in xHCI specification. An interrupt storm does however continue on some hosts even after HCE, and only ceases after manually disabling xHC interrupt and stopping the controller by calling xhci_halt(). Add xhci_halt() to xhci_irq() function where STS_HCE status is checked, mirroring the existing error handling pattern used for STS_FATAL errors. This only fixes the interrupt storm. Proper HCE recovery requires resetting and re-initializing the xHC. | ||||
| CVE-2026-68085 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work there, instead of doing it just in hci_uart_close(). Re-enable and possibly requeue the work after queue flush. | ||||
| CVE-2026-68354 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: firewire: net: Fix fragmented datagram reassembly fwnet_frag_new() keeps a sorted list of received fragments for a partial datagram. When a new fragment is adjacent to an existing fragment, the code checks whether the new fragment also closes the gap to the next or previous list entry. Those neighbor lookups currently assume that the current fragment always has a real next or previous fragment. At a list edge, the next or previous entry is the list head, not a struct fwnet_fragment_info. The gap checks also compare against the old edge of the current fragment instead of the edge after adding the new fragment. As a result, a fragment that bridges two existing ranges may leave two adjacent ranges unmerged, so fwnet_pd_is_complete() can miss a complete datagram. Check for the list head before looking up the neighboring fragment, and compare the neighbor against the new fragment's far edge when deciding whether to merge all three ranges. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-64597 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix double-free in SMB2_close() replay A response-bearing attempt can return a replayable error and free its response buffer. If SMB2_close_init() fails before the next send, cleanup retains the previous buffer type and frees that response again. Reset response bookkeeping before each attempt to prevent the stale free. | ||||
| CVE-2026-68257 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix 32-bit overflow in CWSR total size calculation total_cwsr_size was computed in 32-bit before being used as a BO/SVM allocation size. With large ctx_save_restore_area_size and debug_memory_size multiplied by the XCC count, the product can wrap, yielding an undersized CWSR save area that firmware later overruns. Promote total_cwsr_size to u64 and use check_add_overflow()/ check_mul_overflow() in both kfd_queue_acquire_buffers() and kfd_queue_release_buffers(). (cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) | ||||
| CVE-2026-68108 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: fix integer overflow in image size Fix a security vulnerability where malicious VCE command streams with oversized dimensions (e.g. 65536×65536) cause 32-bit integer overflow, wrapping the calculated buffer size to 0. This bypasses validation and allows GPU firmware to perform out-of-bound memory access. The fix uses 64-bit arithmetic to detect overflow and rejects invalid dimensions before they reach the hardware. V2: remove redundant check V3: modify max height value V4: remove size64 (cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) | ||||
| CVE-2026-68129 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. If the number of buffers posted to hardware falls below a critical low threshold, start a timer to periodically reschedule NAPI. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet. | ||||
| CVE-2026-68199 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB access from firmware ADDBA window size aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to compute a kzalloc size and stored in rxtid->hold_q_sz, leading to zero-size or overflowed allocations and subsequent out-of-bounds access. Clean up any previously active aggregation session for the TID first, then return early when win_sz is out of the valid range, instead of proceeding with a broken allocation size. | ||||
| CVE-2026-68216 | 1 Linux | 1 Linux Kernel | 2026-08-14 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: pwc: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. pwc's start_streaming() had two early returns that hit this trap: -ENODEV when the USB device was already disconnected, and -ERESTARTSYS when mutex_lock_interruptible() was interrupted by a signal. Call the existing pwc_cleanup_queued_bufs() helper with VB2_BUF_STATE_QUEUED before returning (matching the state already used by the pwc_isoc_init() error path in the same function). This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||