| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/edid: fix OOB read in drm_parse_tiled_block()
drm_parse_tiled_block() casts the DisplayID block to a
struct displayid_tiled_block and reads the full fixed layout up to
tile->topology_id[7] without checking block->num_bytes. The DisplayID
iterator only validates the declared payload length, so a crafted EDID
can advertise a tiled-display block (tag DATA_BLOCK_TILED_DISPLAY, or
DATA_BLOCK_2_TILED_DISPLAY_TOPOLOGY for v2.0) with a small num_bytes at
the end of a DisplayID extension. The read then runs past the end of the
exact-sized kmemdup()'d EDID allocation, a heap out-of-bounds read.
Reject blocks shorter than the spec's 22-byte tiled payload before
reading the fixed struct, as drm_parse_vesa_mso_data() already does.
BUG: KASAN: slab-out-of-bounds in drm_edid_connector_update
Read of size 2 at addr ffff888010077700 by task exploit/147
dump_stack_lvl (lib/dump_stack.c:94 ...)
print_report (mm/kasan/report.c:378 ...)
kasan_report (mm/kasan/report.c:595)
drm_edid_connector_update (drivers/gpu/drm/drm_edid.c:7581)
bochs_connector_helper_get_modes (drivers/gpu/drm/tiny/bochs.c:574)
drm_helper_probe_single_connector_modes (drivers/gpu/drm/drm_probe_helper.c:426)
status_store (drivers/gpu/drm/drm_sysfs.c:219)
...
vfs_write (fs/read_write.c:595 fs/read_write.c:688)
ksys_write (fs/read_write.c:740) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Processing a maliciously crafted image may lead to arbitrary code execution. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory. |
| A buffer overflow was addressed with improved size validation. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to execute arbitrary code with kernel privileges. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Parsing a maliciously crafted file may lead to an unexpected app termination. |
| The issue was addressed with improved bounds checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to disclose kernel memory. |
| Out of bounds read in Media in Google Chrome on Mac prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| In wlan AP driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00489200; Issue ID: MSV-7834. |
| In Modem, there is a possible out of bounds read due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY00741071; Issue ID: MSV-7620. |
| In Audio HAL, there is a possible out of bounds write due to a heap buffer overflow. This could lead to local denial of service with User execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS10960023 (Note: For MT6880, MT6890, MT6980D, MT6988, MT6990) / AUTO00851189 (Note: For MT2735, MT3737); Issue ID: MSV-7586. |
| In display, there is a possible information disclosure due to a missing bounds check. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004276; Issue ID: MSV-7757. |
| In display, there is a possible information disclosure due to an integer overflow. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11004274; Issue ID: MSV-7749. |
| In geniezone, there is a possible out of bounds read due to a missing bounds check. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11036877; Issue ID: MSV-7132. |
| In geniezone, there is a possible escalation of privilege due to a missing permission check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS10900493; Issue ID: MSV-6765. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix OOB read when checking dotdot dir
Mounting a corrupted filesystem with directory which contains '.' dir
entry with rec_len == block size results in out-of-bounds read (later
on, when the corrupted directory is removed).
ext4_empty_dir() assumes every ext4 directory contains at least '.'
and '..' as directory entries in the first data block. It first loads
the '.' dir entry, performs sanity checks by calling ext4_check_dir_entry()
and then uses its rec_len member to compute the location of '..' dir
entry (in ext4_next_entry). It assumes the '..' dir entry fits into the
same data block.
If the rec_len of '.' is precisely one block (4KB), it slips through the
sanity checks (it is considered the last directory entry in the data
block) and leaves "struct ext4_dir_entry_2 *de" point exactly past the
memory slot allocated to the data block. The following call to
ext4_check_dir_entry() on new value of de then dereferences this pointer
which results in out-of-bounds mem access.
Fix this by extending __ext4_check_dir_entry() to check for '.' dir
entries that reach the end of data block. Make sure to ignore the phony
dir entries for checksum (by checking name_len for non-zero).
Note: This is reported by KASAN as use-after-free in case another
structure was recently freed from the slot past the bound, but it is
really an OOB read.
This issue was found by syzkaller tool.
Call Trace:
[ 38.594108] BUG: KASAN: slab-use-after-free in __ext4_check_dir_entry+0x67e/0x710
[ 38.594649] Read of size 2 at addr ffff88802b41a004 by task syz-executor/5375
[ 38.595158]
[ 38.595288] CPU: 0 UID: 0 PID: 5375 Comm: syz-executor Not tainted 6.14.0-rc7 #1
[ 38.595298] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 38.595304] Call Trace:
[ 38.595308] <TASK>
[ 38.595311] dump_stack_lvl+0xa7/0xd0
[ 38.595325] print_address_description.constprop.0+0x2c/0x3f0
[ 38.595339] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595349] print_report+0xaa/0x250
[ 38.595359] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595368] ? kasan_addr_to_slab+0x9/0x90
[ 38.595378] kasan_report+0xab/0xe0
[ 38.595389] ? __ext4_check_dir_entry+0x67e/0x710
[ 38.595400] __ext4_check_dir_entry+0x67e/0x710
[ 38.595410] ext4_empty_dir+0x465/0x990
[ 38.595421] ? __pfx_ext4_empty_dir+0x10/0x10
[ 38.595432] ext4_rmdir.part.0+0x29a/0xd10
[ 38.595441] ? __dquot_initialize+0x2a7/0xbf0
[ 38.595455] ? __pfx_ext4_rmdir.part.0+0x10/0x10
[ 38.595464] ? __pfx___dquot_initialize+0x10/0x10
[ 38.595478] ? down_write+0xdb/0x140
[ 38.595487] ? __pfx_down_write+0x10/0x10
[ 38.595497] ext4_rmdir+0xee/0x140
[ 38.595506] vfs_rmdir+0x209/0x670
[ 38.595517] ? lookup_one_qstr_excl+0x3b/0x190
[ 38.595529] do_rmdir+0x363/0x3c0
[ 38.595537] ? __pfx_do_rmdir+0x10/0x10
[ 38.595544] ? strncpy_from_user+0x1ff/0x2e0
[ 38.595561] __x64_sys_unlinkat+0xf0/0x130
[ 38.595570] do_syscall_64+0x5b/0x180
[ 38.595583] entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix an out-of-bounds shift when invalidating TLB
When the size of the range invalidated is larger than
rounddown_pow_of_two(ULONG_MAX),
The function macro roundup_pow_of_two(length) will hit an out-of-bounds
shift [1].
Use a full TLB invalidation for such cases.
v2:
- Use a define for the range size limit over which we use a full
TLB invalidation. (Lucas)
- Use a better calculation of the limit.
[1]:
[ 39.202421] ------------[ cut here ]------------
[ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10
[ 39.202690] Tainted: [U]=USER
[ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[ 39.202691] Call Trace:
[ 39.202692] <TASK>
[ 39.202695] dump_stack_lvl+0x6e/0xa0
[ 39.202699] ubsan_epilogue+0x5/0x30
[ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6
[ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe]
[ 39.202800] ? find_held_lock+0x2b/0x80
[ 39.202803] ? mark_held_locks+0x40/0x70
[ 39.202806] xe_svm_invalidate+0x459/0x700 [xe]
[ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm]
[ 39.202900] __mmu_notifier_release+0x1f5/0x270
[ 39.202905] exit_mmap+0x40e/0x450
[ 39.202912] __mmput+0x45/0x110
[ 39.202914] exit_mm+0xc5/0x130
[ 39.202916] do_exit+0x21c/0x500
[ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190
[ 39.202920] do_group_exit+0x36/0xa0
[ 39.202922] get_signal+0x8f8/0x900
[ 39.202926] arch_do_signal_or_restart+0x35/0x100
[ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290
[ 39.202932] do_syscall_64+0xa1/0x180
[ 39.202934] ? do_user_addr_fault+0x59f/0x8a0
[ 39.202937] ? lock_release+0xd2/0x2a0
[ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0
[ 39.202942] ? trace_hardirqs_off+0x4b/0xc0
[ 39.202944] ? clear_bhb_loop+0x25/0x80
[ 39.202946] ? clear_bhb_loop+0x25/0x80
[ 39.202947] ? clear_bhb_loop+0x25/0x80
[ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 39.202952] RIP: 0033:0x7fa945e543e1
[ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7.
[ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293
[ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3
[ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff
[ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0
[ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
[ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000
[ 39.202970] </TASK>
[ 39.202970] ---[ end trace ]---
(cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad) |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: add index check to assert to avoid buffer overflow in _read_freq()
Pass the freq index to the assert function to make sure
we do not read a freq out of the opp->rates[] table when called
from the indexed variants:
dev_pm_opp_find_freq_exact_indexed() or
dev_pm_opp_find_freq_ceil/floor_indexed().
Add a secondary parameter to the assert function, unused
for assert_single_clk() then add assert_clk_index() which
will check for the clock index when called from the _indexed()
find functions. |
| In the Linux kernel, the following vulnerability has been resolved:
net_sched: sch_sfq: don't allow 1 packet limit
The current implementation does not work correctly with a limit of
1. iproute2 actually checks for this and this patch adds the check in
kernel as well.
This fixes the following syzkaller reported crash:
UBSAN: array-index-out-of-bounds in net/sched/sch_sfq.c:210:6
index 65535 is out of range for type 'struct sfq_head[128]'
CPU: 0 PID: 2569 Comm: syz-executor101 Not tainted 5.10.0-smp-DEV #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
__dump_stack lib/dump_stack.c:79 [inline]
dump_stack+0x125/0x19f lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:148 [inline]
__ubsan_handle_out_of_bounds+0xed/0x120 lib/ubsan.c:347
sfq_link net/sched/sch_sfq.c:210 [inline]
sfq_dec+0x528/0x600 net/sched/sch_sfq.c:238
sfq_dequeue+0x39b/0x9d0 net/sched/sch_sfq.c:500
sfq_reset+0x13/0x50 net/sched/sch_sfq.c:525
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
tbf_reset+0x3d/0x100 net/sched/sch_tbf.c:319
qdisc_reset+0xfe/0x510 net/sched/sch_generic.c:1026
dev_reset_queue+0x8c/0x140 net/sched/sch_generic.c:1296
netdev_for_each_tx_queue include/linux/netdevice.h:2350 [inline]
dev_deactivate_many+0x6dc/0xc20 net/sched/sch_generic.c:1362
__dev_close_many+0x214/0x350 net/core/dev.c:1468
dev_close_many+0x207/0x510 net/core/dev.c:1506
unregister_netdevice_many+0x40f/0x16b0 net/core/dev.c:10738
unregister_netdevice_queue+0x2be/0x310 net/core/dev.c:10695
unregister_netdevice include/linux/netdevice.h:2893 [inline]
__tun_detach+0x6b6/0x1600 drivers/net/tun.c:689
tun_detach drivers/net/tun.c:705 [inline]
tun_chr_close+0x104/0x1b0 drivers/net/tun.c:3640
__fput+0x203/0x840 fs/file_table.c:280
task_work_run+0x129/0x1b0 kernel/task_work.c:185
exit_task_work include/linux/task_work.h:33 [inline]
do_exit+0x5ce/0x2200 kernel/exit.c:931
do_group_exit+0x144/0x310 kernel/exit.c:1046
__do_sys_exit_group kernel/exit.c:1057 [inline]
__se_sys_exit_group kernel/exit.c:1055 [inline]
__x64_sys_exit_group+0x3b/0x40 kernel/exit.c:1055
do_syscall_64+0x6c/0xd0
entry_SYSCALL_64_after_hwframe+0x61/0xcb
RIP: 0033:0x7fe5e7b52479
Code: Unable to access opcode bytes at RIP 0x7fe5e7b5244f.
RSP: 002b:00007ffd3c800398 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe5e7b52479
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000
RBP: 00007fe5e7bcd2d0 R08: ffffffffffffffb8 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe5e7bcd2d0
R13: 0000000000000000 R14: 00007fe5e7bcdd20 R15: 00007fe5e7b24270
The crash can be also be reproduced with the following (with a tc
recompiled to allow for sfq limits of 1):
tc qdisc add dev dummy0 handle 1: root tbf rate 1Kbit burst 100b lat 1s
../iproute2-6.9.0/tc/tc qdisc add dev dummy0 handle 2: parent 1:10 sfq limit 1
ifconfig dummy0 up
ping -I dummy0 -f -c2 -W0.1 8.8.8.8
sleep 1
Scenario that triggers the crash:
* the first packet is sent and queued in TBF and SFQ; qdisc qlen is 1
* TBF dequeues: it peeks from SFQ which moves the packet to the
gso_skb list and keeps qdisc qlen set to 1. TBF is out of tokens so
it schedules itself for later.
* the second packet is sent and TBF tries to queues it to SFQ. qdisc
qlen is now 2 and because the SFQ limit is 1 the packet is dropped
by SFQ. At this point qlen is 1, and all of the SFQ slots are empty,
however q->tail is not NULL.
At this point, assuming no more packets are queued, when sch_dequeue
runs again it will decrement the qlen for the current empty slot
causing an underflow and the subsequent out of bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: state: fix out-of-bounds read during lookup
lookup and resize can run in parallel.
The xfrm_state_hash_generation seqlock ensures a retry, but the hash
functions can observe a hmask value that is too large for the new hlist
array.
rehash does:
rcu_assign_pointer(net->xfrm.state_bydst, ndst) [..]
net->xfrm.state_hmask = nhashmask;
While state lookup does:
h = xfrm_dst_hash(net, daddr, saddr, tmpl->reqid, encap_family);
hlist_for_each_entry_rcu(x, net->xfrm.state_bydst + h, bydst) {
This is only safe in case the update to state_bydst is larger than
net->xfrm.xfrm_state_hmask (or if the lookup function gets
serialized via state spinlock again).
Fix this by prefetching state_hmask and the associated pointers.
The xfrm_state_hash_generation seqlock retry will ensure that the pointer
and the hmask will be consistent.
The existing helpers, like xfrm_dst_hash(), are now unsafe for RCU side,
add lockdep assertions to document that they are only safe for insert
side.
xfrm_state_lookup_byaddr() uses the spinlock rather than RCU.
AFAICS this is an oversight from back when state lookup was converted to
RCU, this lock should be replaced with RCU in a future patch. |
