| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mte: Avoid setting PG_mte_tagged if no tags cleared or restored
Prior to commit 69e3b846d8a7 ("arm64: mte: Sync tags for pages where PTE
is untagged"), mte_sync_tags() was only called for pte_tagged() entries
(those mapped with PROT_MTE). Therefore mte_sync_tags() could safely use
test_and_set_bit(PG_mte_tagged, &page->flags) without inadvertently
setting PG_mte_tagged on an untagged page.
The above commit was required as guests may enable MTE without any
control at the stage 2 mapping, nor a PROT_MTE mapping in the VMM.
However, the side-effect was that any page with a PTE that looked like
swap (or migration) was getting PG_mte_tagged set automatically. A
subsequent page copy (e.g. migration) copied the tags to the destination
page even if the tags were owned by KASAN.
This issue was masked by the page_kasan_tag_reset() call introduced in
commit e5b8d9218951 ("arm64: mte: reset the page tag in page->flags").
When this commit was reverted (20794545c146), KASAN started reporting
access faults because the overriding tags in a page did not match the
original page->flags (with CONFIG_KASAN_HW_TAGS=y):
BUG: KASAN: invalid-access in copy_page+0x10/0xd0 arch/arm64/lib/copy_page.S:26
Read at addr f5ff000017f2e000 by task syz-executor.1/2218
Pointer tag: [f5], memory tag: [f2]
Move the PG_mte_tagged bit setting from mte_sync_tags() to the actual
place where tags are cleared (mte_sync_page_tags()) or restored
(mte_restore_tags()). |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix potential memory leak in ext4_fc_record_modified_inode()
As krealloc may return NULL, in this case 'state->fc_modified_inodes'
may not be freed by krealloc, but 'state->fc_modified_inodes' already
set NULL. Then will lead to 'state->fc_modified_inodes' memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: fix use after free in _ipmi_destroy_user()
The intf_free() function frees the "intf" pointer so we cannot
dereference it again on the next line. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: fix invalid address access when enabling SCAN log level
The variable i is changed when setting random MAC address and causes
invalid address access when printing the value of pi->reqs[i]->reqid.
We replace reqs index with ri to fix the issue.
[ 136.726473] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000000
[ 136.737365] Mem abort info:
[ 136.740172] ESR = 0x96000004
[ 136.743359] Exception class = DABT (current EL), IL = 32 bits
[ 136.749294] SET = 0, FnV = 0
[ 136.752481] EA = 0, S1PTW = 0
[ 136.755635] Data abort info:
[ 136.758514] ISV = 0, ISS = 0x00000004
[ 136.762487] CM = 0, WnR = 0
[ 136.765522] user pgtable: 4k pages, 48-bit VAs, pgdp = 000000005c4e2577
[ 136.772265] [0000000000000000] pgd=0000000000000000
[ 136.777160] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[ 136.782732] Modules linked in: brcmfmac(O) brcmutil(O) cfg80211(O) compat(O)
[ 136.789788] Process wificond (pid: 3175, stack limit = 0x00000000053048fb)
[ 136.796664] CPU: 3 PID: 3175 Comm: wificond Tainted: G O 4.19.42-00001-g531a5f5 #1
[ 136.805532] Hardware name: Freescale i.MX8MQ EVK (DT)
[ 136.810584] pstate: 60400005 (nZCv daif +PAN -UAO)
[ 136.815429] pc : brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[ 136.821811] lr : brcmf_pno_config_sched_scans+0x67c/0xa80 [brcmfmac]
[ 136.828162] sp : ffff00000e9a3880
[ 136.831475] x29: ffff00000e9a3890 x28: ffff800020543400
[ 136.836786] x27: ffff8000b1008880 x26: ffff0000012bf6a0
[ 136.842098] x25: ffff80002054345c x24: ffff800088d22400
[ 136.847409] x23: ffff0000012bf638 x22: ffff0000012bf6d8
[ 136.852721] x21: ffff8000aced8fc0 x20: ffff8000ac164400
[ 136.858032] x19: ffff00000e9a3946 x18: 0000000000000000
[ 136.863343] x17: 0000000000000000 x16: 0000000000000000
[ 136.868655] x15: ffff0000093f3b37 x14: 0000000000000050
[ 136.873966] x13: 0000000000003135 x12: 0000000000000000
[ 136.879277] x11: 0000000000000000 x10: ffff000009a61888
[ 136.884589] x9 : 000000000000000f x8 : 0000000000000008
[ 136.889900] x7 : 303a32303d726464 x6 : ffff00000a1f957d
[ 136.895211] x5 : 0000000000000000 x4 : ffff00000e9a3942
[ 136.900523] x3 : 0000000000000000 x2 : ffff0000012cead8
[ 136.905834] x1 : ffff0000012bf6d8 x0 : 0000000000000000
[ 136.911146] Call trace:
[ 136.913623] brcmf_pno_config_sched_scans+0x6cc/0xa80 [brcmfmac]
[ 136.919658] brcmf_pno_start_sched_scan+0xa4/0x118 [brcmfmac]
[ 136.925430] brcmf_cfg80211_sched_scan_start+0x80/0xe0 [brcmfmac]
[ 136.931636] nl80211_start_sched_scan+0x140/0x308 [cfg80211]
[ 136.937298] genl_rcv_msg+0x358/0x3f4
[ 136.940960] netlink_rcv_skb+0xb4/0x118
[ 136.944795] genl_rcv+0x34/0x48
[ 136.947935] netlink_unicast+0x264/0x300
[ 136.951856] netlink_sendmsg+0x2e4/0x33c
[ 136.955781] __sys_sendto+0x120/0x19c |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix DMA mappings leak
During reallocation of RX buffers, new DMA mappings are created for
those buffers.
steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done
This resulted in crash:
i40e 0000:01:00.1: Unable to allocate memory for the Rx descriptor ring, size=65536
Driver BUG
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:141 xdp_rxq_info_unreg+0x43/0x50
Call Trace:
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
Missing register, driver bug
WARNING: CPU: 0 PID: 4300 at net/core/xdp.c:119 xdp_rxq_info_unreg_mem_model+0x69/0x140
Call Trace:
xdp_rxq_info_unreg+0x1e/0x50
i40e_free_rx_resources+0x70/0x80 [i40e]
i40e_set_ringparam+0x27c/0x800 [i40e]
ethnl_set_rings+0x1b2/0x290
genl_family_rcv_msg_doit.isra.15+0x10f/0x150
genl_family_rcv_msg+0xb3/0x160
? rings_fill_reply+0x1a0/0x1a0
genl_rcv_msg+0x47/0x90
? genl_family_rcv_msg+0x160/0x160
netlink_rcv_skb+0x4c/0x120
genl_rcv+0x24/0x40
netlink_unicast+0x196/0x230
netlink_sendmsg+0x204/0x3d0
sock_sendmsg+0x4c/0x50
__sys_sendto+0xee/0x160
? handle_mm_fault+0xbe/0x1e0
? syscall_trace_enter+0x1d3/0x2c0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7f5eac8b035b
This was caused because of new buffers with different RX ring count should
substitute older ones, but those buffers were freed in
i40e_configure_rx_ring and reallocated again with i40e_alloc_rx_bi,
thus kfree on rx_bi caused leak of already mapped DMA.
Fix this by reallocating ZC with rx_bi_zc struct when BPF program loads. Additionally
reallocate back to rx_bi when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XSP_SETUP_XSK_POOL handler. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: hif_usb: fix memory leak of urbs in ath9k_hif_usb_dealloc_tx_urbs()
Syzkaller reports a long-known leak of urbs in
ath9k_hif_usb_dealloc_tx_urbs().
The cause of the leak is that usb_get_urb() is called but usb_free_urb()
(or usb_put_urb()) is not called inside usb_kill_urb() as urb->dev or
urb->ep fields have not been initialized and usb_kill_urb() returns
immediately.
The patch removes trying to kill urbs located in hif_dev->tx.tx_buf
because hif_dev->tx.tx_buf is not supposed to contain urbs which are in
pending state (the pending urbs are stored in hif_dev->tx.tx_pending).
The tx.tx_lock is acquired so there should not be any changes in the list.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: da7219: Fix an error handling path in da7219_register_dai_clks()
If clk_hw_register() fails, the corresponding clk should not be
unregistered.
To handle errors from loops, clean up partial iterations before doing the
goto. So add a clk_hw_unregister().
Then use a while (--i >= 0) loop in the unwind section. |
| In the Linux kernel, the following vulnerability has been resolved:
media: v4l2-core: Fix a potential resource leak in v4l2_fwnode_parse_link()
If fwnode_graph_get_remote_endpoint() fails, 'fwnode' is known to be NULL,
so fwnode_handle_put() is a no-op.
Release the reference taken from a previous fwnode_graph_get_port_parent()
call instead.
Also handle fwnode_graph_get_port_parent() failures.
In order to fix these issues, add an error handling path to the function
and the needed gotos. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: remove BUG_ON()'s in add_new_free_space()
At add_new_free_space() we have these BUG_ON()'s that are there to deal
with any failure to add free space to the in memory free space cache.
Such failures are mostly -ENOMEM that should be very rare. However there's
no need to have these BUG_ON()'s, we can just return any error to the
caller and all callers and their upper call chain are already dealing with
errors.
So just make add_new_free_space() return any errors, while removing the
BUG_ON()'s, and returning the total amount of added free space to an
optional u64 pointer argument. |
| In the Linux kernel, the following vulnerability has been resolved:
ping: Fix potentail NULL deref for /proc/net/icmp.
After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid
of rwlock"), we use RCU for ping sockets, but we should use spinlock
for /proc/net/icmp to avoid a potential NULL deref mentioned in
the previous patch.
Let's go back to using spinlock there.
Note we can convert ping sockets to use hlist instead of hlist_nulls
because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: apple-admac: Fix 'current_tx' not getting freed
In terminate_all we should queue up all submitted descriptors to be
freed. We do that for the content of the 'issued' and 'submitted' lists,
but the 'current_tx' descriptor falls through the cracks as it's
removed from the 'issued' list once it gets assigned to be the current
descriptor. Explicitly queue up freeing of the 'current_tx' descriptor
to address a memory leak that is otherwise present. |
| In the Linux kernel, the following vulnerability has been resolved:
pstore/ram: Add check for kstrdup
Add check for the return value of kstrdup() and return the error
if it fails in order to avoid NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: led-core: Fix refcount leak in of_led_get()
class_find_device_by_of_node() calls class_find_device(), it will take
the reference, use the put_device() to drop the reference when not need
anymore. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix memory leak in mt7996_mcu_exit
Always purge mcu skb queues in mt7996_mcu_exit routine even if
mt7996_firmware_state fails. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix null pointer panic in tracepoint in __replace_atomic_write_block
We got a kernel panic if old_addr is NULL.
https://bugzilla.kernel.org/show_bug.cgi?id=217266
BUG: kernel NULL pointer dereference, address: 0000000000000000
Call Trace:
<TASK>
f2fs_commit_atomic_write+0x619/0x990 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
__f2fs_ioctl+0xd8e/0x4080 [f2fs a1b985b80f5babd6f3ea778384908880812bfa43]
? vfs_write+0x2ae/0x3f0
? vfs_write+0x2ae/0x3f0
__x64_sys_ioctl+0x91/0xd0
do_syscall_64+0x5c/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f69095fe53f |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix warning when putting transaction with qgroups enabled after abort
If we have a transaction abort with qgroups enabled we get a warning
triggered when doing the final put on the transaction, like this:
[552.6789] ------------[ cut here ]------------
[552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6817] Modules linked in: btrfs blake2b_generic xor (...)
[552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6821] Code: bd a0 01 00 (...)
[552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286
[552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000
[552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010
[552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20
[552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70
[552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028
[552.6821] FS: 0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000
[552.6821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0
[552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[552.6822] Call Trace:
[552.6822] <TASK>
[552.6822] ? __warn+0x80/0x130
[552.6822] ? btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6824] ? report_bug+0x1f4/0x200
[552.6824] ? handle_bug+0x42/0x70
[552.6824] ? exc_invalid_op+0x14/0x70
[552.6824] ? asm_exc_invalid_op+0x16/0x20
[552.6824] ? btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6826] btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs]
[552.6828] ? _raw_spin_unlock_irqrestore+0x23/0x40
[552.6828] ? try_to_wake_up+0x94/0x5e0
[552.6828] ? __pfx_process_timeout+0x10/0x10
[552.6828] transaction_kthread+0x103/0x1d0 [btrfs]
[552.6830] ? __pfx_transaction_kthread+0x10/0x10 [btrfs]
[552.6832] kthread+0xee/0x120
[552.6832] ? __pfx_kthread+0x10/0x10
[552.6832] ret_from_fork+0x29/0x50
[552.6832] </TASK>
[552.6832] ---[ end trace 0000000000000000 ]---
This corresponds to this line of code:
void btrfs_put_transaction(struct btrfs_transaction *transaction)
{
(...)
WARN_ON(!RB_EMPTY_ROOT(
&transaction->delayed_refs.dirty_extent_root));
(...)
}
The warning happens because btrfs_qgroup_destroy_extent_records(), called
in the transaction abort path, we free all entries from the rbtree
"dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we
don't actually empty the rbtree - it's still pointing to nodes that were
freed.
So set the rbtree's root node to NULL to avoid this warning (assign
RB_ROOT). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()
When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle case when repair happens with dev-replace
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device. |
| In the Linux kernel, the following vulnerability has been resolved:
exfat: use kvmalloc_array/kvfree instead of kmalloc_array/kfree
The call stack shown below is a scenario in the Linux 4.19 kernel.
Allocating memory failed where exfat fs use kmalloc_array due to
system memory fragmentation, while the u-disk was inserted without
recognition.
Devices such as u-disk using the exfat file system are pluggable and
may be insert into the system at any time.
However, long-term running systems cannot guarantee the continuity of
physical memory. Therefore, it's necessary to address this issue.
Binder:2632_6: page allocation failure: order:4,
mode:0x6040c0(GFP_KERNEL|__GFP_COMP), nodemask=(null)
Call trace:
[242178.097582] dump_backtrace+0x0/0x4
[242178.097589] dump_stack+0xf4/0x134
[242178.097598] warn_alloc+0xd8/0x144
[242178.097603] __alloc_pages_nodemask+0x1364/0x1384
[242178.097608] kmalloc_order+0x2c/0x510
[242178.097612] kmalloc_order_trace+0x40/0x16c
[242178.097618] __kmalloc+0x360/0x408
[242178.097624] load_alloc_bitmap+0x160/0x284
[242178.097628] exfat_fill_super+0xa3c/0xe7c
[242178.097635] mount_bdev+0x2e8/0x3a0
[242178.097638] exfat_fs_mount+0x40/0x50
[242178.097643] mount_fs+0x138/0x2e8
[242178.097649] vfs_kern_mount+0x90/0x270
[242178.097655] do_mount+0x798/0x173c
[242178.097659] ksys_mount+0x114/0x1ac
[242178.097665] __arm64_sys_mount+0x24/0x34
[242178.097671] el0_svc_common+0xb8/0x1b8
[242178.097676] el0_svc_handler+0x74/0x90
[242178.097681] el0_svc+0x8/0x340
By analyzing the exfat code,we found that continuous physical memory
is not required here,so kvmalloc_array is used can solve this problem. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix timeout of a call that hasn't yet been granted a channel
afs_make_call() calls rxrpc_kernel_begin_call() to begin a call (which may
get stalled in the background waiting for a connection to become
available); it then calls rxrpc_kernel_set_max_life() to set the timeouts -
but that starts the call timer so the call timer might then expire before
we get a connection assigned - leading to the following oops if the call
stalled:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
CPU: 1 PID: 5111 Comm: krxrpcio/0 Not tainted 6.3.0-rc7-build3+ #701
RIP: 0010:rxrpc_alloc_txbuf+0xc0/0x157
...
Call Trace:
<TASK>
rxrpc_send_ACK+0x50/0x13b
rxrpc_input_call_event+0x16a/0x67d
rxrpc_io_thread+0x1b6/0x45f
? _raw_spin_unlock_irqrestore+0x1f/0x35
? rxrpc_input_packet+0x519/0x519
kthread+0xe7/0xef
? kthread_complete_and_exit+0x1b/0x1b
ret_from_fork+0x22/0x30
Fix this by noting the timeouts in struct rxrpc_call when the call is
created. The timer will be started when the first packet is transmitted.
It shouldn't be possible to trigger this directly from userspace through
AF_RXRPC as sendmsg() will return EBUSY if the call is in the
waiting-for-conn state if it dropped out of the wait due to a signal. |
