| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nilfs2: fix infinite loop in nilfs_mdt_get_block()
If the disk image that nilfs2 mounts is corrupted and a virtual block
address obtained by block lookup for a metadata file is invalid,
nilfs_bmap_lookup_at_level() may return the same internal return code as
-ENOENT, meaning the block does not exist in the metadata file.
This duplication of return codes confuses nilfs_mdt_get_block(), causing
it to read and create a metadata block indefinitely.
In particular, if this happens to the inode metadata file, ifile,
semaphore i_rwsem can be left held, causing task hangs in lock_mount.
Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block
address translation failures with -ENOENT as metadata corruption instead
of returning the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
usb-storage: alauda: Fix uninit-value in alauda_check_media()
Syzbot got KMSAN to complain about access to an uninitialized value in
the alauda subdriver of usb-storage:
BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0
drivers/usb/storage/alauda.c:1137
CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x191/0x1f0 lib/dump_stack.c:113
kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108
__msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250
alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460
The problem is that alauda_check_media() doesn't verify that its USB
transfer succeeded before trying to use the received data. What
should happen if the transfer fails isn't entirely clear, but a
reasonably conservative approach is to pretend that no media is
present.
A similar problem exists in a usb_stor_dbg() call in
alauda_get_media_status(). In this case, when an error occurs the
call is redundant, because usb_stor_ctrl_transfer() already will print
a debugging message.
Finally, unrelated to the uninitialized memory access, is the fact
that alauda_check_media() performs DMA to a buffer on the stack.
Fortunately usb-storage provides a general purpose DMA-able buffer for
uses like this. We'll use it instead. |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: do not hard code device address lenth in fdb dumps
syzbot reports that some netdev devices do not have a six bytes
address [1]
Replace ETH_ALEN by dev->addr_len.
[1] (Case of a device where dev->addr_len = 4)
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak in copyout+0xb8/0x100 lib/iov_iter.c:169
instrument_copy_to_user include/linux/instrumented.h:114 [inline]
copyout+0xb8/0x100 lib/iov_iter.c:169
_copy_to_iter+0x6d8/0x1d00 lib/iov_iter.c:536
copy_to_iter include/linux/uio.h:206 [inline]
simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:513
__skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:419
skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:527
skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
netlink_recvmsg+0x4ae/0x15a0 net/netlink/af_netlink.c:1970
sock_recvmsg_nosec net/socket.c:1019 [inline]
sock_recvmsg net/socket.c:1040 [inline]
____sys_recvmsg+0x283/0x7f0 net/socket.c:2722
___sys_recvmsg+0x223/0x840 net/socket.c:2764
do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858
__sys_recvmmsg net/socket.c:2937 [inline]
__do_sys_recvmmsg net/socket.c:2960 [inline]
__se_sys_recvmmsg net/socket.c:2953 [inline]
__x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was stored to memory at:
__nla_put lib/nlattr.c:1009 [inline]
nla_put+0x1c6/0x230 lib/nlattr.c:1067
nlmsg_populate_fdb_fill+0x2b8/0x600 net/core/rtnetlink.c:4071
nlmsg_populate_fdb net/core/rtnetlink.c:4418 [inline]
ndo_dflt_fdb_dump+0x616/0x840 net/core/rtnetlink.c:4456
rtnl_fdb_dump+0x14ff/0x1fc0 net/core/rtnetlink.c:4629
netlink_dump+0x9d1/0x1310 net/netlink/af_netlink.c:2268
netlink_recvmsg+0xc5c/0x15a0 net/netlink/af_netlink.c:1995
sock_recvmsg_nosec+0x7a/0x120 net/socket.c:1019
____sys_recvmsg+0x664/0x7f0 net/socket.c:2720
___sys_recvmsg+0x223/0x840 net/socket.c:2764
do_recvmmsg+0x4f9/0xfd0 net/socket.c:2858
__sys_recvmmsg net/socket.c:2937 [inline]
__do_sys_recvmmsg net/socket.c:2960 [inline]
__se_sys_recvmmsg net/socket.c:2953 [inline]
__x64_sys_recvmmsg+0x397/0x490 net/socket.c:2953
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:716
slab_alloc_node mm/slub.c:3451 [inline]
__kmem_cache_alloc_node+0x4ff/0x8b0 mm/slub.c:3490
kmalloc_trace+0x51/0x200 mm/slab_common.c:1057
kmalloc include/linux/slab.h:559 [inline]
__hw_addr_create net/core/dev_addr_lists.c:60 [inline]
__hw_addr_add_ex+0x2e5/0x9e0 net/core/dev_addr_lists.c:118
__dev_mc_add net/core/dev_addr_lists.c:867 [inline]
dev_mc_add+0x9a/0x130 net/core/dev_addr_lists.c:885
igmp6_group_added+0x267/0xbc0 net/ipv6/mcast.c:680
ipv6_mc_up+0x296/0x3b0 net/ipv6/mcast.c:2754
ipv6_mc_remap+0x1e/0x30 net/ipv6/mcast.c:2708
addrconf_type_change net/ipv6/addrconf.c:3731 [inline]
addrconf_notify+0x4d3/0x1d90 net/ipv6/addrconf.c:3699
notifier_call_chain kernel/notifier.c:93 [inline]
raw_notifier_call_chain+0xe4/0x430 kernel/notifier.c:461
call_netdevice_notifiers_info net/core/dev.c:1935 [inline]
call_netdevice_notifiers_extack net/core/dev.c:1973 [inline]
call_netdevice_notifiers+0x1ee/0x2d0 net/core/dev.c:1987
bond_enslave+0xccd/0x53f0 drivers/net/bonding/bond_main.c:1906
do_set_master net/core/rtnetlink.c:2626 [inline]
rtnl_newlink_create net/core/rtnetlink.c:3460 [inline]
__rtnl_newlink net/core/rtnetlink.c:3660 [inline]
rtnl_newlink+0x378c/0x40e0 net/core/rtnetlink.c:3673
rtnetlink_rcv_msg+0x16a6/0x1840 net/core/rtnetlink.c:6395
netlink_rcv_skb+0x371/0x650 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6413
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0xf28/0x1230 net/netlink/af_
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid5-cache: fix a deadlock in r5l_exit_log()
Commit b13015af94cf ("md/raid5-cache: Clear conf->log after finishing
work") introduce a new problem:
// caller hold reconfig_mutex
r5l_exit_log
flush_work(&log->disable_writeback_work)
r5c_disable_writeback_async
wait_event
/*
* conf->log is not NULL, and mddev_trylock()
* will fail, wait_event() can never pass.
*/
conf->log = NULL
Fix this problem by setting 'config->log' to NULL before wake_up() as it
used to be, so that wait_event() from r5c_disable_writeback_async() can
exist. In the meantime, move forward md_unregister_thread() so that
null-ptr-deref this commit fixed can still be fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: fix workqueue leak on bind errors
Make sure to destroy the workqueue also in case of early errors during
bind (e.g. a subcomponent failing to bind).
Since commit c3b790ea07a1 ("drm: Manage drm_mode_config_init with
drmm_") the mode config will be freed when the drm device is released
also when using the legacy interface, but add an explicit cleanup for
consistency and to facilitate backporting.
Patchwork: https://patchwork.freedesktop.org/patch/525093/ |
| In the Linux kernel, the following vulnerability has been resolved:
iavf: use internal state to free traffic IRQs
If the system tries to close the netdev while iavf_reset_task() is
running, __LINK_STATE_START will be cleared and netif_running() will
return false in iavf_reinit_interrupt_scheme(). This will result in
iavf_free_traffic_irqs() not being called and a leak as follows:
[7632.489326] remove_proc_entry: removing non-empty directory 'irq/999', leaking at least 'iavf-enp24s0f0v0-TxRx-0'
[7632.490214] WARNING: CPU: 0 PID: 10 at fs/proc/generic.c:718 remove_proc_entry+0x19b/0x1b0
is shown when pci_disable_msix() is later called. Fix by using the
internal adapter state. The traffic IRQs will always exist if
state == __IAVF_RUNNING. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Array index may go out of bound
Klocwork reports array 'vha->host_str' of size 16 may use index value(s)
16..19. Use snprintf() instead of sprintf(). |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-core: fix memory leak in dhchap_secret_store
Free dhchap_secret in nvme_ctrl_dhchap_secret_store() before we return
fix following kmemleack:-
unreferenced object 0xffff8886376ea800 (size 64):
comm "check", pid 22048, jiffies 4344316705 (age 92.199s)
hex dump (first 32 bytes):
44 48 48 43 2d 31 3a 30 30 3a 6e 78 72 35 4b 67 DHHC-1:00:nxr5Kg
75 58 34 75 6f 41 78 73 4a 61 34 63 2f 68 75 4c uX4uoAxsJa4c/huL
backtrace:
[<0000000030ce5d4b>] __kmalloc+0x4b/0x130
[<000000009be1cdc1>] nvme_ctrl_dhchap_secret_store+0x8f/0x160 [nvme_core]
[<00000000ac06c96a>] kernfs_fop_write_iter+0x12b/0x1c0
[<00000000437e7ced>] vfs_write+0x2ba/0x3c0
[<00000000f9491baf>] ksys_write+0x5f/0xe0
[<000000001c46513d>] do_syscall_64+0x3b/0x90
[<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff8886376eaf00 (size 64):
comm "check", pid 22048, jiffies 4344316736 (age 92.168s)
hex dump (first 32 bytes):
44 48 48 43 2d 31 3a 30 30 3a 6e 78 72 35 4b 67 DHHC-1:00:nxr5Kg
75 58 34 75 6f 41 78 73 4a 61 34 63 2f 68 75 4c uX4uoAxsJa4c/huL
backtrace:
[<0000000030ce5d4b>] __kmalloc+0x4b/0x130
[<000000009be1cdc1>] nvme_ctrl_dhchap_secret_store+0x8f/0x160 [nvme_core]
[<00000000ac06c96a>] kernfs_fop_write_iter+0x12b/0x1c0
[<00000000437e7ced>] vfs_write+0x2ba/0x3c0
[<00000000f9491baf>] ksys_write+0x5f/0xe0
[<000000001c46513d>] do_syscall_64+0x3b/0x90
[<00000000ecf348fe>] entry_SYSCALL_64_after_hwframe+0x72/0xdc |
| In the Linux kernel, the following vulnerability has been resolved:
netlink: annotate accesses to nlk->cb_running
Both netlink_recvmsg() and netlink_native_seq_show() read
nlk->cb_running locklessly. Use READ_ONCE() there.
Add corresponding WRITE_ONCE() to netlink_dump() and
__netlink_dump_start()
syzbot reported:
BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg
write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0:
__netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399
netlink_dump_start include/linux/netlink.h:308 [inline]
rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130
netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577
rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192
netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline]
netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365
netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
sock_write_iter+0x1aa/0x230 net/socket.c:1138
call_write_iter include/linux/fs.h:1851 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x463/0x760 fs/read_write.c:584
ksys_write+0xeb/0x1a0 fs/read_write.c:637
__do_sys_write fs/read_write.c:649 [inline]
__se_sys_write fs/read_write.c:646 [inline]
__x64_sys_write+0x42/0x50 fs/read_write.c:646
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1:
netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022
sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017
____sys_recvmsg+0x2db/0x310 net/socket.c:2718
___sys_recvmsg net/socket.c:2762 [inline]
do_recvmmsg+0x2e5/0x710 net/socket.c:2856
__sys_recvmmsg net/socket.c:2935 [inline]
__do_sys_recvmmsg net/socket.c:2958 [inline]
__se_sys_recvmmsg net/socket.c:2951 [inline]
__x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x00 -> 0x01 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: mediatek: mt8186: Fix use-after-free in driver remove path
When devm runs function in the "remove" path for a device it runs them
in the reverse order. That means that if you have parts of your driver
that aren't using devm or are using "roll your own" devm w/
devm_add_action_or_reset() you need to keep that in mind.
The mt8186 audio driver didn't quite get this right. Specifically, in
mt8186_init_clock() it called mt8186_audsys_clk_register() and then
went on to call a bunch of other devm function. The caller of
mt8186_init_clock() used devm_add_action_or_reset() to call
mt8186_deinit_clock() but, because of the intervening devm functions,
the order was wrong.
Specifically at probe time, the order was:
1. mt8186_audsys_clk_register()
2. afe_priv->clk = devm_kcalloc(...)
3. afe_priv->clk[i] = devm_clk_get(...)
At remove time, the order (which should have been 3, 2, 1) was:
1. mt8186_audsys_clk_unregister()
3. Free all of afe_priv->clk[i]
2. Free afe_priv->clk
The above seemed to be causing a use-after-free. Luckily, it's easy to
fix this by simply using devm more correctly. Let's move the
devm_add_action_or_reset() to the right place. In addition to fixing
the use-after-free, code inspection shows that this fixes a leak
(missing call to mt8186_audsys_clk_unregister()) that would have
happened if any of the syscon_regmap_lookup_by_phandle() calls in
mt8186_init_clock() had failed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on driver remove
When the tagging protocol in current use is "ocelot-8021q" and we unbind
the driver, we see this splat:
$ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind
mscc_felix 0000:00:00.5 swp0: left promiscuous mode
sja1105 spi2.0: Link is Down
DSA: tree 1 torn down
mscc_felix 0000:00:00.5 swp2: left promiscuous mode
sja1105 spi2.2: Link is Down
DSA: tree 3 torn down
fsl_enetc 0000:00:00.2 eno2: left promiscuous mode
mscc_felix 0000:00:00.5: Link is Down
------------[ cut here ]------------
RTNL: assertion failed at net/dsa/tag_8021q.c (409)
WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0
Modules linked in:
CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771
pc : dsa_tag_8021q_unregister+0x12c/0x1a0
lr : dsa_tag_8021q_unregister+0x12c/0x1a0
Call trace:
dsa_tag_8021q_unregister+0x12c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
---[ end trace 0000000000000000 ]---
------------[ cut here ]------------
RTNL: assertion failed at net/8021q/vlan_core.c (376)
WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0
CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771
pc : vlan_vid_del+0x1b8/0x1f0
lr : vlan_vid_del+0x1b8/0x1f0
dsa_tag_8021q_unregister+0x8c/0x1a0
felix_tag_8021q_teardown+0x130/0x150
felix_teardown+0x3c/0xd8
dsa_tree_teardown_switches+0xbc/0xe0
dsa_unregister_switch+0x168/0x260
felix_pci_remove+0x30/0x60
pci_device_remove+0x4c/0x100
device_release_driver_internal+0x188/0x288
device_links_unbind_consumers+0xfc/0x138
device_release_driver_internal+0xe0/0x288
device_driver_detach+0x24/0x38
unbind_store+0xd8/0x108
drv_attr_store+0x30/0x50
DSA: tree 0 torn down
This was somewhat not so easy to spot, because "ocelot-8021q" is not the
default tagging protocol, and thus, not everyone who tests the unbinding
path may have switched to it beforehand. The default
felix_tag_npi_teardown() does not require rtnl_lock() to be held. |
| In the Linux kernel, the following vulnerability has been resolved:
of: overlay: Call of_changeset_init() early
When of_overlay_fdt_apply() fails, the changeset may be partially
applied, and the caller is still expected to call of_overlay_remove() to
clean up this partial state.
However, of_overlay_apply() calls of_resolve_phandles() before
init_overlay_changeset(). Hence if the overlay fails to apply due to an
unresolved symbol, the overlay_changeset.cset.entries list is still
uninitialized, and cleanup will crash with a NULL-pointer dereference in
overlay_removal_is_ok().
Fix this by moving the call to of_changeset_init() from
init_overlay_changeset() to of_overlay_fdt_apply(), where all other
early initialization is done. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
'./test_progs -t test_local_storage' reported a splat:
[ 27.137569] =============================
[ 27.138122] [ BUG: Invalid wait context ]
[ 27.138650] 6.5.0-03980-gd11ae1b16b0a #247 Tainted: G O
[ 27.139542] -----------------------------
[ 27.140106] test_progs/1729 is trying to lock:
[ 27.140713] ffff8883ef047b88 (stock_lock){-.-.}-{3:3}, at: local_lock_acquire+0x9/0x130
[ 27.141834] other info that might help us debug this:
[ 27.142437] context-{5:5}
[ 27.142856] 2 locks held by test_progs/1729:
[ 27.143352] #0: ffffffff84bcd9c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x40
[ 27.144492] #1: ffff888107deb2c0 (&storage->lock){..-.}-{2:2}, at: bpf_local_storage_update+0x39e/0x8e0
[ 27.145855] stack backtrace:
[ 27.146274] CPU: 0 PID: 1729 Comm: test_progs Tainted: G O 6.5.0-03980-gd11ae1b16b0a #247
[ 27.147550] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
[ 27.149127] Call Trace:
[ 27.149490] <TASK>
[ 27.149867] dump_stack_lvl+0x130/0x1d0
[ 27.152609] dump_stack+0x14/0x20
[ 27.153131] __lock_acquire+0x1657/0x2220
[ 27.153677] lock_acquire+0x1b8/0x510
[ 27.157908] local_lock_acquire+0x29/0x130
[ 27.159048] obj_cgroup_charge+0xf4/0x3c0
[ 27.160794] slab_pre_alloc_hook+0x28e/0x2b0
[ 27.161931] __kmem_cache_alloc_node+0x51/0x210
[ 27.163557] __kmalloc+0xaa/0x210
[ 27.164593] bpf_map_kzalloc+0xbc/0x170
[ 27.165147] bpf_selem_alloc+0x130/0x510
[ 27.166295] bpf_local_storage_update+0x5aa/0x8e0
[ 27.167042] bpf_fd_sk_storage_update_elem+0xdb/0x1a0
[ 27.169199] bpf_map_update_value+0x415/0x4f0
[ 27.169871] map_update_elem+0x413/0x550
[ 27.170330] __sys_bpf+0x5e9/0x640
[ 27.174065] __x64_sys_bpf+0x80/0x90
[ 27.174568] do_syscall_64+0x48/0xa0
[ 27.175201] entry_SYSCALL_64_after_hwframe+0x6e/0xd8
[ 27.175932] RIP: 0033:0x7effb40e41ad
[ 27.176357] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d8
[ 27.179028] RSP: 002b:00007ffe64c21fc8 EFLAGS: 00000202 ORIG_RAX: 0000000000000141
[ 27.180088] RAX: ffffffffffffffda RBX: 00007ffe64c22768 RCX: 00007effb40e41ad
[ 27.181082] RDX: 0000000000000020 RSI: 00007ffe64c22008 RDI: 0000000000000002
[ 27.182030] RBP: 00007ffe64c21ff0 R08: 0000000000000000 R09: 00007ffe64c22788
[ 27.183038] R10: 0000000000000064 R11: 0000000000000202 R12: 0000000000000000
[ 27.184006] R13: 00007ffe64c22788 R14: 00007effb42a1000 R15: 0000000000000000
[ 27.184958] </TASK>
It complains about acquiring a local_lock while holding a raw_spin_lock.
It means it should not allocate memory while holding a raw_spin_lock
since it is not safe for RT.
raw_spin_lock is needed because bpf_local_storage supports tracing
context. In particular for task local storage, it is easy to
get a "current" task PTR_TO_BTF_ID in tracing bpf prog.
However, task (and cgroup) local storage has already been moved to
bpf mem allocator which can be used after raw_spin_lock.
The splat is for the sk storage. For sk (and inode) storage,
it has not been moved to bpf mem allocator. Using raw_spin_lock or not,
kzalloc(GFP_ATOMIC) could theoretically be unsafe in tracing context.
However, the local storage helper requires a verifier accepted
sk pointer (PTR_TO_BTF_ID), it is hypothetical if that (mean running
a bpf prog in a kzalloc unsafe context and also able to hold a verifier
accepted sk pointer) could happen.
This patch avoids kzalloc after raw_spin_lock to silent the splat.
There is an existing kzalloc before the raw_spin_lock. At that point,
a kzalloc is very likely required because a lookup has just been done
before. Thus, this patch always does the kzalloc before acq
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tty: serial: samsung_tty: Fix a memory leak in s3c24xx_serial_getclk() in case of error
If clk_get_rate() fails, the clk that has just been allocated needs to be
freed. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/idle: mark arch_cpu_idle() noinstr
linux-next commit ("cpuidle: tracing: Warn about !rcu_is_watching()")
adds a new warning which hits on s390's arch_cpu_idle() function:
RCU not on for: arch_cpu_idle+0x0/0x28
WARNING: CPU: 2 PID: 0 at include/linux/trace_recursion.h:162 arch_ftrace_ops_list_func+0x24c/0x258
Modules linked in:
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 6.2.0-rc6-next-20230202 #4
Hardware name: IBM 8561 T01 703 (z/VM 7.3.0)
Krnl PSW : 0404d00180000000 00000000002b55c0 (arch_ftrace_ops_list_func+0x250/0x258)
R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3
Krnl GPRS: c0000000ffffbfff 0000000080000002 0000000000000026 0000000000000000
0000037ffffe3a28 0000037ffffe3a20 0000000000000000 0000000000000000
0000000000000000 0000000000f4acf6 00000000001044f0 0000037ffffe3cb0
0000000000000000 0000000000000000 00000000002b55bc 0000037ffffe3bb8
Krnl Code: 00000000002b55b0: c02000840051 larl %r2,0000000001335652
00000000002b55b6: c0e5fff512d1 brasl %r14,0000000000157b58
#00000000002b55bc: af000000 mc 0,0
>00000000002b55c0: a7f4ffe7 brc 15,00000000002b558e
00000000002b55c4: 0707 bcr 0,%r7
00000000002b55c6: 0707 bcr 0,%r7
00000000002b55c8: eb6ff0480024 stmg %r6,%r15,72(%r15)
00000000002b55ce: b90400ef lgr %r14,%r15
Call Trace:
[<00000000002b55c0>] arch_ftrace_ops_list_func+0x250/0x258
([<00000000002b55bc>] arch_ftrace_ops_list_func+0x24c/0x258)
[<0000000000f5f0fc>] ftrace_common+0x1c/0x20
[<00000000001044f6>] arch_cpu_idle+0x6/0x28
[<0000000000f4acf6>] default_idle_call+0x76/0x128
[<00000000001cc374>] do_idle+0xf4/0x1b0
[<00000000001cc6ce>] cpu_startup_entry+0x36/0x40
[<0000000000119d00>] smp_start_secondary+0x140/0x150
[<0000000000f5d2ae>] restart_int_handler+0x6e/0x90
Mark arch_cpu_idle() noinstr like all other architectures with
CONFIG_ARCH_WANTS_NO_INSTR (should) have it to fix this. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: handle case when repair happens with dev-replace
[BUG]
There is a bug report that a BUG_ON() in btrfs_repair_io_failure()
(originally repair_io_failure() in v6.0 kernel) got triggered when
replacing a unreliable disk:
BTRFS warning (device sda1): csum failed root 257 ino 2397453 off 39624704 csum 0xb0d18c75 expected csum 0x4dae9c5e mirror 3
kernel BUG at fs/btrfs/extent_io.c:2380!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 9 PID: 3614331 Comm: kworker/u257:2 Tainted: G OE 6.0.0-5-amd64 #1 Debian 6.0.10-2
Hardware name: Micro-Star International Co., Ltd. MS-7C60/TRX40 PRO WIFI (MS-7C60), BIOS 2.70 07/01/2021
Workqueue: btrfs-endio btrfs_end_bio_work [btrfs]
RIP: 0010:repair_io_failure+0x24a/0x260 [btrfs]
Call Trace:
<TASK>
clean_io_failure+0x14d/0x180 [btrfs]
end_bio_extent_readpage+0x412/0x6e0 [btrfs]
? __switch_to+0x106/0x420
process_one_work+0x1c7/0x380
worker_thread+0x4d/0x380
? rescuer_thread+0x3a0/0x3a0
kthread+0xe9/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
[CAUSE]
Before the BUG_ON(), we got some read errors from the replace target
first, note the mirror number (3, which is beyond RAID1 duplication,
thus it's read from the replace target device).
Then at the BUG_ON() location, we are trying to writeback the repaired
sectors back the failed device.
The check looks like this:
ret = btrfs_map_block(fs_info, BTRFS_MAP_WRITE, logical,
&map_length, &bioc, mirror_num);
if (ret)
goto out_counter_dec;
BUG_ON(mirror_num != bioc->mirror_num);
But inside btrfs_map_block(), we can modify bioc->mirror_num especially
for dev-replace:
if (dev_replace_is_ongoing && mirror_num == map->num_stripes + 1 &&
!need_full_stripe(op) && dev_replace->tgtdev != NULL) {
ret = get_extra_mirror_from_replace(fs_info, logical, *length,
dev_replace->srcdev->devid,
&mirror_num,
&physical_to_patch_in_first_stripe);
patch_the_first_stripe_for_dev_replace = 1;
}
Thus if we're repairing the replace target device, we're going to
trigger that BUG_ON().
But in reality, the read failure from the replace target device may be
that, our replace hasn't reached the range we're reading, thus we're
reading garbage, but with replace running, the range would be properly
filled later.
Thus in that case, we don't need to do anything but let the replace
routine to handle it.
[FIX]
Instead of a BUG_ON(), just skip the repair if we're repairing the
device replace target device. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mxsfb: Disable overlay plane in mxsfb_plane_overlay_atomic_disable()
When disabling overlay plane in mxsfb_plane_overlay_atomic_update(),
overlay plane's framebuffer pointer is NULL. So, dereferencing it would
cause a kernel Oops(NULL pointer dereferencing). Fix the issue by
disabling overlay plane in mxsfb_plane_overlay_atomic_disable() instead. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix warning when putting transaction with qgroups enabled after abort
If we have a transaction abort with qgroups enabled we get a warning
triggered when doing the final put on the transaction, like this:
[552.6789] ------------[ cut here ]------------
[552.6815] WARNING: CPU: 4 PID: 81745 at fs/btrfs/transaction.c:144 btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6817] Modules linked in: btrfs blake2b_generic xor (...)
[552.6819] CPU: 4 PID: 81745 Comm: btrfs-transacti Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[552.6819] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[552.6819] RIP: 0010:btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6821] Code: bd a0 01 00 (...)
[552.6821] RSP: 0018:ffffa168c0527e28 EFLAGS: 00010286
[552.6821] RAX: ffff936042caed00 RBX: ffff93604a3eb448 RCX: 0000000000000000
[552.6821] RDX: ffff93606421b028 RSI: ffffffff92ff0878 RDI: ffff93606421b010
[552.6821] RBP: ffff93606421b000 R08: 0000000000000000 R09: ffffa168c0d07c20
[552.6821] R10: 0000000000000000 R11: ffff93608dc52950 R12: ffffa168c0527e70
[552.6821] R13: ffff93606421b000 R14: ffff93604a3eb420 R15: ffff93606421b028
[552.6821] FS: 0000000000000000(0000) GS:ffff93675fb00000(0000) knlGS:0000000000000000
[552.6821] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[552.6821] CR2: 0000558ad262b000 CR3: 000000014feda005 CR4: 0000000000370ee0
[552.6822] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[552.6822] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[552.6822] Call Trace:
[552.6822] <TASK>
[552.6822] ? __warn+0x80/0x130
[552.6822] ? btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6824] ? report_bug+0x1f4/0x200
[552.6824] ? handle_bug+0x42/0x70
[552.6824] ? exc_invalid_op+0x14/0x70
[552.6824] ? asm_exc_invalid_op+0x16/0x20
[552.6824] ? btrfs_put_transaction+0x123/0x130 [btrfs]
[552.6826] btrfs_cleanup_transaction+0xe7/0x5e0 [btrfs]
[552.6828] ? _raw_spin_unlock_irqrestore+0x23/0x40
[552.6828] ? try_to_wake_up+0x94/0x5e0
[552.6828] ? __pfx_process_timeout+0x10/0x10
[552.6828] transaction_kthread+0x103/0x1d0 [btrfs]
[552.6830] ? __pfx_transaction_kthread+0x10/0x10 [btrfs]
[552.6832] kthread+0xee/0x120
[552.6832] ? __pfx_kthread+0x10/0x10
[552.6832] ret_from_fork+0x29/0x50
[552.6832] </TASK>
[552.6832] ---[ end trace 0000000000000000 ]---
This corresponds to this line of code:
void btrfs_put_transaction(struct btrfs_transaction *transaction)
{
(...)
WARN_ON(!RB_EMPTY_ROOT(
&transaction->delayed_refs.dirty_extent_root));
(...)
}
The warning happens because btrfs_qgroup_destroy_extent_records(), called
in the transaction abort path, we free all entries from the rbtree
"dirty_extent_root" with rbtree_postorder_for_each_entry_safe(), but we
don't actually empty the rbtree - it's still pointing to nodes that were
freed.
So set the rbtree's root node to NULL to avoid this warning (assign
RB_ROOT). |
| In the Linux kernel, the following vulnerability has been resolved:
ping: Fix potentail NULL deref for /proc/net/icmp.
After commit dbca1596bbb0 ("ping: convert to RCU lookups, get rid
of rwlock"), we use RCU for ping sockets, but we should use spinlock
for /proc/net/icmp to avoid a potential NULL deref mentioned in
the previous patch.
Let's go back to using spinlock there.
Note we can convert ping sockets to use hlist instead of hlist_nulls
because we do not use SLAB_TYPESAFE_BY_RCU for ping sockets. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: Disallow unallocated resources to be returned
In the event that the topology requests resources that have not been
created by the system (because they are typically not represented in
dpu_mdss_cfg ^1), the resource(s) in global_state (in this case DSC
blocks, until their allocation/assignment is being sanity-checked in
"drm/msm/dpu: Reject topologies for which no DSC blocks are available")
remain NULL but will still be returned out of
dpu_rm_get_assigned_resources, where the caller expects to get an array
containing num_blks valid pointers (but instead gets these NULLs).
To prevent this from happening, where null-pointer dereferences
typically result in a hard-to-debug platform lockup, num_blks shouldn't
increase past NULL blocks and will print an error and break instead.
After all, max_blks represents the static size of the maximum number of
blocks whereas the actual amount varies per platform.
^1: which can happen after a git rebase ended up moving additions to
_dpu_cfg to a different struct which has the same patch context.
Patchwork: https://patchwork.freedesktop.org/patch/517636/ |
