| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Drop CLONE_THREAD requirement for private default hash alloc
Currently need_futex_hash_allocate_default() depends on strict pthread
semantics, abusing CLONE_THREAD. This breaks the non-concurrency
assumptions when doing the mm->futex_ref pcpu allocations, leading to
bugs[0] when sharing the mm in other ways; ie:
BUG: KASAN: slab-use-after-free in futex_hash_put
... where the +1 bias can end up on a percpu counter that mm->futex_ref
no longer points at.
Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding
vfork keeps the existing paths untouched (no overhead), and we can't
race in the first place: either the parent is suspended and the child
runs alone, or mm->futex_ref is already allocated from an earlier
CLONE_VM. |
| In the Linux kernel, the following vulnerability has been resolved:
greybus: raw: fix use-after-free on cdev close
This addresses a use-after-free bug when a raw bundle is disconnected
but its chardev is still opened by an application. When the application
releases the cdev, it causes the following panic when init on free is
enabled (CONFIG_INIT_ON_FREE_DEFAULT_ON=y):
refcount_t: underflow; use-after-free.
WARNING: CPU: 0 PID: 139 at lib/refcount.c:28 refcount_warn_saturate+0xd0/0x130
...
Call Trace:
<TASK>
cdev_put+0x18/0x30
__fput+0x255/0x2a0
__x64_sys_close+0x3d/0x80
do_syscall_64+0xa4/0x290
entry_SYSCALL_64_after_hwframe+0x77/0x7f
The cdev is contained in the "gb_raw" structure, which is freed in the
disconnect operation. When the cdev is released at a later time,
cdev_put gets an address that points to freed memory.
To fix this use-after-free, convert the struct device from a pointer to
being embedded, that makes the lifetime of the cdev and of this device
the same. Then, use cdev_device_add, which guarantees that the device
won't be released until all references to the cdev have been released.
Finally, delegate the freeing of the structure to the device release
function, instead of freeing immediately in the disconnect callback. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: mcast: Fix use-after-free when processing MLD queries
When processing an MLD query, a pointer to the multicast group address
is retrieved when initially parsing the packet. This pointer is later
dereferenced without being reloaded despite the fact that the skb header
might have been reallocated following the pskb_may_pull() calls, leading
to a use-after-free [1].
Fix by copying the multicast group address when the packet is initially
parsed.
[1]
BUG: KASAN: slab-use-after-free in __mld_query_work (net/ipv6/mcast.c:1512)
Read of size 8 at addr ffff8881154b8e90 by task kworker/4:1/118
Workqueue: mld mld_query_work
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_address_description.constprop.0 (mm/kasan/report.c:378)
print_report (mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
__mld_query_work (net/ipv6/mcast.c:1512)
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
</TASK>
[...]
Freed by task 118:
kasan_save_stack (mm/kasan/common.c:57)
kasan_save_track (mm/kasan/common.c:78)
kasan_save_free_info (mm/kasan/generic.c:584)
__kasan_slab_free (mm/kasan/common.c:253 mm/kasan/common.c:285)
kfree (./include/linux/kasan.h:235 mm/slub.c:2689 mm/slub.c:6251 mm/slub.c:6566)
pskb_expand_head (net/core/skbuff.c:2335)
__pskb_pull_tail (net/core/skbuff.c:2878 (discriminator 4))
__mld_query_work (net/ipv6/mcast.c:1495 (discriminator 1))
mld_query_work (net/ipv6/mcast.c:1563)
process_one_work (kernel/workqueue.c:3314)
worker_thread (kernel/workqueue.c:3397 kernel/workqueue.c:3478)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245) |
| In the Linux kernel, the following vulnerability has been resolved:
tee: optee: prevent use-after-free when the client exits before the supplicant
Commit 70b0d6b0a199 ("tee: optee: Fix supplicant wait loop") made the
client wait as killable so it can be interrupted during shutdown or
after a supplicant crash. This changes the original lifetime expectations:
the client task can now terminate while the supplicant is still processing
its request.
If the client exits first it removes the request from its queue and
kfree()s it, while the request ID remains in supp->idr. A subsequent
lookup on the supplicant path then dereferences freed memory, leading to
a use-after-free.
Serialise access to the request with supp->mutex:
* Hold supp->mutex in optee_supp_recv() and optee_supp_send() while
looking up and touching the request.
* Let optee_supp_thrd_req() notice that the client has terminated and
signal optee_supp_send() accordingly.
With these changes the request cannot be freed while the supplicant still
has a reference, eliminating the race. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: anycast: insert aca into global hash under idev->lock
syzbot reported a splat [1]: a slab-use-after-free in
ipv6_chk_acast_addr(), which walks the global inet6_acaddr_lst[] hash
under RCU and dereferences a struct ifacaddr6 that has already been
freed while still linked in the hash, so a later reader walks into a
dangling node.
In __ipv6_dev_ac_inc() the aca is allocated with refcount 1, then
aca_get() bumps it to 2 to keep it alive across the unlocked region.
It is published to idev->ac_list under idev->lock, but
ipv6_add_acaddr_hash() runs after write_unlock_bh(). A concurrent
teardown (ipv6_ac_destroy_dev() from addrconf_ifdown(), under RTNL)
can slip into that window:
CPU0 __ipv6_dev_ac_inc CPU1 ipv6_ac_destroy_dev (RTNL)
------------------------------ ------------------------------------
aca_alloc() refcnt 1
aca_get() refcnt 2
write_lock_bh(idev->lock)
add aca to ac_list
write_unlock_bh(idev->lock)
write_lock_bh(idev->lock)
pull aca off ac_list
write_unlock_bh(idev->lock)
ipv6_del_acaddr_hash(aca)
hlist_del_init_rcu() is a no-op,
aca is not in the hash yet
aca_put() refcnt 2->1
ipv6_add_acaddr_hash(aca)
aca now inserted into the hash
aca_put() refcnt 1->0
call_rcu(aca_free_rcu) -> kfree(aca)
The hash removal becomes a no-op because the insertion has not
happened yet, so once CPU0 inserts and drops the last reference, the
aca is freed while still linked in inet6_acaddr_lst[], and readers
dereference freed memory after the slab slot is reused.
This window opened once RTNL stopped serializing the join path against
device teardown. Move ipv6_add_acaddr_hash() inside the idev->lock
section so the ac_list and hash insertions are atomic with respect to
teardown: a racing remover now either misses the aca entirely or finds
it in both lists.
acaddr_hash_lock is now nested under idev->lock, which is acquired in
softirq context, so switch all acaddr_hash_lock sites to spin_lock_bh()
to avoid the irq lock inversion reported in [2].
[1] https://syzkaller.appspot.com/bug?extid=a01df04303c131efbf3a
[2] https://lore.kernel.org/netdev/[email protected]/ |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: RFCOMM: hold listener socket in rfcomm_connect_ind()
rfcomm_get_sock_by_channel() scans rfcomm_sk_list under the list lock,
but returns the selected listener after dropping that lock without
taking a reference. rfcomm_connect_ind() then locks the listener,
queues a child socket on it, and may notify it after unlocking it.
The buggy scenario involves two paths, with each column showing the
order within that path:
rfcomm_connect_ind(): listener close:
1. Find parent in 1. close() enters
rfcomm_get_sock_by_channel() rfcomm_sock_release().
2. Drop rfcomm_sk_list.lock 2. rfcomm_sock_shutdown()
without pinning parent. closes the listener.
3. Call lock_sock(parent) and 3. rfcomm_sock_kill()
bt_accept_enqueue(parent, unlinks and puts parent.
sk, true).
4. Read parent flags and may 4. parent can be freed.
call sk_state_change().
If close wins the race, parent can be freed before
rfcomm_connect_ind() reaches lock_sock(), bt_accept_enqueue(), or the
deferred-setup callback.
Take a reference on the listener before leaving rfcomm_sk_list.lock.
After lock_sock() succeeds, recheck that it is still in BT_LISTEN
before queueing a child, cache the deferred-setup bit while the parent
is locked, and drop the reference after the last parent use.
KASAN reported a slab-use-after-free in lock_sock_nested() from
rfcomm_connect_ind(), with the freeing stack going through
rfcomm_sock_kill() and rfcomm_sock_release(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix use-after-free in metadata dst teardown
airoha_metadata_dst_free() runs metadata_dst_free() which frees the
metadata_dst with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, an use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: Fix use-after-free in metadata dst teardown
mtk_free_dev() calls metadata_dst_free() which frees the metadata_dst
with kfree() immediately, bypassing the RCU grace period.
In the RX path, skb_dst_set_noref() sets a non-refcounted pointer from
the skb to the metadata_dst. This function requires RCU read-side
protection and the dst must remain valid until all RCU readers complete.
Since metadata_dst_free() calls kfree() directly, a use-after-free can
occur if any skb still holds a noref pointer to the dst when the driver
tears it down.
Replace metadata_dst_free() with dst_release() which properly goes
through the refcount path: when the refcount drops to zero, it schedules
the actual free via call_rcu_hurry(), ensuring all RCU readers have
completed before the memory is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: fix use-after-free on first_skb in __input_process_payload
__input_process_payload() stores first_skb into xtfs->ra_newskb under
drop_lock when starting partial reassembly, then unlocks and breaks out
of the processing loop. The post-loop check reads xtfs->ra_newskb
without the lock to decide whether first_skb is still owned:
if (first_skb && first_iplen && !defer && first_skb != xtfs->ra_newskb)
Between spin_unlock and this read, a concurrent CPU running
iptfs_reassem_cont() (or the drop_timer hrtimer) can complete
reassembly, NULL xtfs->ra_newskb, and free the skb. The check then
evaluates first_skb != NULL as true, and pskb_trim/ip_summed/consume_skb
operate on the freed skb — a use-after-free in skbuff_head_cache.
Replace the unlocked read with a local bool that records whether
first_skb was handed to the reassembly state in the current call. The
flag is set after the existing spin_unlock, before the break, using the
pointer equality that is stable at that point (first_skb == skb iff
first_skb was stored in ra_newskb). |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: policy: fix use-after-free on inexact bin in xfrm_policy_bysel_ctx()
Fix the race by pruning the bin while still holding xfrm_policy_lock,
before dropping it. Use __xfrm_policy_inexact_prune_bin() directly since
the lock is already held. The wrapper xfrm_policy_inexact_prune_bin()
becomes unused and is removed.
Race:
CPU0 (XFRM_MSG_DELPOLICY) CPU1 (XFRM_MSG_NEWSPDINFO)
========================== ==========================
xfrm_policy_bysel_ctx():
spin_lock_bh(xfrm_policy_lock)
bin = xfrm_policy_inexact_lookup()
__xfrm_policy_unlink(pol)
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_kill(ret)
// wide window, lock not held
xfrm_hash_rebuild():
spin_lock_bh(xfrm_policy_lock)
__xfrm_policy_inexact_flush():
kfree_rcu(bin) // bin freed
spin_unlock_bh(xfrm_policy_lock)
xfrm_policy_inexact_prune_bin(bin)
// UAF: bin is freed |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_tunnel: fix use-after-free on object destroy
nft_tunnel_obj_destroy() calls metadata_dst_free() which directly
kfree()s the metadata_dst, ignoring the dst_entry refcount. Packets
that took a reference via dst_hold() in nft_tunnel_obj_eval() and
are still queued (e.g. in a netem qdisc) are left with a dangling
pointer. When these packets are eventually dequeued, dst_release()
operates on freed memory.
Replace metadata_dst_free() with dst_release() so the metadata_dst
is freed only after all references are dropped. The dst subsystem
already handles metadata_dst cleanup in dst_destroy() when
DST_METADATA is set. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of a deferred file_lock on double SMB2_CANCEL
A deferred byte-range lock (an SMB2_LOCK that blocks) registers an async work on
conn->async_requests via setup_async_work(), with cancel_fn =
smb2_remove_blocked_lock and cancel_argv[0] pointing at the struct file_lock.
When the request is cancelled, the worker frees the file_lock with
locks_free_lock() and takes the cancelled early-exit, which "goto out"s and never
reaches release_async_work() -- the only site that unlinks the work from
conn->async_requests and clears cancel_fn/cancel_argv. The work therefore stays
matchable on async_requests with a live cancel_fn pointing at the freed file_lock,
until connection teardown finally runs release_async_work().
smb2_cancel() fires cancel_fn unconditionally with no state guard, so a second
SMB2_CANCEL for the same AsyncId, arriving in that window, re-runs
smb2_remove_blocked_lock() on the freed file_lock -- a slab use-after-free:
BUG: KASAN: slab-use-after-free in __locks_delete_block
__locks_delete_block
locks_delete_block
ksmbd_vfs_posix_lock_unblock
smb2_remove_blocked_lock
smb2_cancel <- 2nd SMB2_CANCEL fires cancel_fn
handle_ksmbd_work
Allocated by ...: locks_alloc_lock <- smb2_lock
Freed by ...: locks_free_lock <- smb2_lock (cancelled branch)
... cache file_lock_cache of size 192
Reproduced on mainline with KASAN by an authenticated SMB client.
Skip a work whose state is already KSMBD_WORK_CANCELLED so its cancel callback
cannot be fired a second time. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: Forcibly close timer instances at closing
When snd_timer object is freed via snd_timer_free() and still pending
snd_timer_instance objects are assigned to the timer object, it tries
to unlink all instances and just set NULL to each ti->timer, then
releases the resources immediately. The problem is, however, when
there are slave timer instances that are associated with a master
instance linked to this timer: namely, those slave instances still
point to the freed timer object although the master instance is
unlinked, which may lead to user-after-free. The bug can be easily
triggered particularly when a new userspace-driven timers
(CONFIG_SND_UTIMER) is involved, since it can create and delete the
timer object via a simple file open/close, while the other
applications may keep accessing to that timer.
This patch is an attempt to paper over the problem above: now instead
of just unlinking, call snd_timer_close[_locked]() forcibly for each
pending timer instance, so that all assigned slave timer instances are
properly detached, too. Since snd_timer_close() might be called later
by the driver that created that instance, the check of
SNDRV_TIMER_IFLG_DEAD is added at the beginning, too. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: fix use-after-free in zram_bvec_write_partial()
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b9421d
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: fastrpc: fix use-after-free race in fastrpc_map_create
fastrpc_map_lookup returns a raw pointer after releasing fl->lock. The
caller fastrpc_map_create then calls fastrpc_map_get (kref_get_unless_zero)
on this unprotected pointer. A concurrent MEM_UNMAP can free the map
between the lock release and the kref operation, resulting in a
use-after-free on the freed slab object.
Restore the take_ref parameter to fastrpc_map_lookup so the reference
is acquired atomically under fl->lock before the pointer is exposed to
the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fix mm lifecycle in open-coded task_vma iterator
The open-coded task_vma iterator reads task->mm locklessly and acquires
mmap_read_trylock() but never calls mmget(). If the task exits
concurrently, the mm_struct can be freed as it is not
SLAB_TYPESAFE_BY_RCU, resulting in a use-after-free.
Safely read task->mm with a trylock on alloc_lock and acquire an mm
reference. Drop the reference via bpf_iter_mmput_async() in _destroy()
and error paths. bpf_iter_mmput_async() is a local wrapper around
mmput_async() with a fallback to mmput() on !CONFIG_MMU.
Reject irqs-disabled contexts (including NMI) up front. Operations used
by _next() and _destroy() (mmap_read_unlock, bpf_iter_mmput_async)
take spinlocks with IRQs disabled (pool->lock, pi_lock). Running from
NMI or from a tracepoint that fires with those locks held could
deadlock.
A trylock on alloc_lock is used instead of the blocking task_lock()
(get_task_mm) to avoid a deadlock when a softirq BPF program iterates
a task that already holds its alloc_lock on the same CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: l2cap: Add missing chan lock in l2cap_ecred_reconf_rsp
l2cap_ecred_reconf_rsp() calls l2cap_chan_del() without holding
l2cap_chan_lock(). Every other l2cap_chan_del() caller in the file
acquires the lock first. A remote BLE device can send a crafted
L2CAP ECRED reconfiguration response to corrupt the channel list
while another thread is iterating it.
Add l2cap_chan_hold() and l2cap_chan_lock() before l2cap_chan_del(),
and l2cap_chan_unlock() and l2cap_chan_put() after, matching the
pattern used in l2cap_ecred_conn_rsp() and l2cap_conn_del(). |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: hisilicon/sec2 - prevent req used-after-free for sec
During packet transmission, if the system is under heavy load,
the hardware might complete processing the packet and free the
request memory (req) before the transmission function finishes.
If the software subsequently accesses this req, a use-after-free
error will occur. The qp_ctx memory exists throughout the packet
sending process, so replace the req with the qp_ctx. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate bg_bits during freefrag scan
[BUG]
A crafted filesystem can trigger an out-of-bounds bitmap walk when
OCFS2_IOC_INFO is issued with OCFS2_INFO_FL_NON_COHERENT.
BUG: KASAN: use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline]
BUG: KASAN: use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: use-after-free in test_bit_le include/asm-generic/bitops/le.h:21 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
BUG: KASAN: use-after-free in ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
BUG: KASAN: use-after-free in ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
Read of size 8 at addr ffff888031bce000 by task syz.0.636/1435
Call Trace:
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xbe/0x130 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xd1/0x650 mm/kasan/report.c:482
kasan_report+0xfb/0x140 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:186 [inline]
kasan_check_range+0x11c/0x200 mm/kasan/generic.c:200
__kasan_check_read+0x11/0x20 mm/kasan/shadow.c:31
instrument_atomic_read include/linux/instrumented.h:68 [inline]
_test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
test_bit_le include/asm-generic/bitops/le.h:21 [inline]
ocfs2_info_freefrag_scan_chain fs/ocfs2/ioctl.c:495 [inline]
ocfs2_info_freefrag_scan_bitmap fs/ocfs2/ioctl.c:588 [inline]
ocfs2_info_handle_freefrag fs/ocfs2/ioctl.c:662 [inline]
ocfs2_info_handle_request+0x1c66/0x3370 fs/ocfs2/ioctl.c:754
ocfs2_info_handle+0x18d/0x2a0 fs/ocfs2/ioctl.c:828
ocfs2_ioctl+0x632/0x6e0 fs/ocfs2/ioctl.c:913
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x197/0x1e0 fs/ioctl.c:583
...
[CAUSE]
ocfs2_info_freefrag_scan_chain() uses on-disk bg_bits directly as the
bitmap scan limit. The coherent path reads group descriptors through
ocfs2_read_group_descriptor(), which validates the descriptor before
use. The non-coherent path uses ocfs2_read_blocks_sync() instead and
skips that validation, so an impossible bg_bits value can drive the
bitmap walk past the end of the block.
[FIX]
Compute the bitmap capacity from the filesystem format with
ocfs2_group_bitmap_size(), report descriptors whose bg_bits exceeds
that limit, and clamp the scan to the computed capacity. This keeps the
freefrag report going while avoiding reads beyond the buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Take state lock for af_unix iter
When a BPF iterator program updates a sockmap, there is a race condition in
unix_stream_bpf_update_proto() where the `peer` pointer can become stale[1]
during a state transition TCP_ESTABLISHED -> TCP_CLOSE.
CPU0 bpf CPU1 close
-------- ----------
// unix_stream_bpf_update_proto()
sk_pair = unix_peer(sk)
if (unlikely(!sk_pair))
return -EINVAL;
// unix_release_sock()
skpair = unix_peer(sk);
unix_peer(sk) = NULL;
sock_put(skpair)
sock_hold(sk_pair) // UaF
More practically, this fix guarantees that the iterator program is
consistently provided with a unix socket that remains stable during
iterator execution.
[1]:
BUG: KASAN: slab-use-after-free in unix_stream_bpf_update_proto+0x155/0x490
Write of size 4 at addr ffff8881178c9a00 by task test_progs/2231
Call Trace:
dump_stack_lvl+0x5d/0x80
print_report+0x170/0x4f3
kasan_report+0xe4/0x1c0
kasan_check_range+0x125/0x200
unix_stream_bpf_update_proto+0x155/0x490
sock_map_link+0x71c/0xec0
sock_map_update_common+0xbc/0x600
sock_map_update_elem+0x19a/0x1f0
bpf_prog_bbbf56096cdd4f01_selective_dump_unix+0x20c/0x217
bpf_iter_run_prog+0x21e/0xae0
bpf_iter_unix_seq_show+0x1e0/0x2a0
bpf_seq_read+0x42c/0x10d0
vfs_read+0x171/0xb20
ksys_read+0xff/0x200
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Allocated by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_slab_alloc+0x63/0x80
kmem_cache_alloc_noprof+0x1d5/0x680
sk_prot_alloc+0x59/0x210
sk_alloc+0x34/0x470
unix_create1+0x86/0x8a0
unix_stream_connect+0x318/0x15b0
__sys_connect+0xfd/0x130
__x64_sys_connect+0x72/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 2236:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x70
__kasan_slab_free+0x47/0x70
kmem_cache_free+0x11c/0x590
__sk_destruct+0x432/0x6e0
unix_release_sock+0x9b3/0xf60
unix_release+0x8a/0xf0
__sock_release+0xb0/0x270
sock_close+0x18/0x20
__fput+0x36e/0xac0
fput_close_sync+0xe5/0x1a0
__x64_sys_close+0x7d/0xd0
do_syscall_64+0xf7/0x5e0
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
