| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: decrease sc_count directly if fail to queue dl_recall
A deadlock warning occurred when invoking nfs4_put_stid following a failed
dl_recall queue operation:
T1 T2
nfs4_laundromat
nfs4_get_client_reaplist
nfs4_anylock_blockers
__break_lease
spin_lock // ctx->flc_lock
spin_lock // clp->cl_lock
nfs4_lockowner_has_blockers
locks_owner_has_blockers
spin_lock // flctx->flc_lock
nfsd_break_deleg_cb
nfsd_break_one_deleg
nfs4_put_stid
refcount_dec_and_lock
spin_lock // clp->cl_lock
When a file is opened, an nfs4_delegation is allocated with sc_count
initialized to 1, and the file_lease holds a reference to the delegation.
The file_lease is then associated with the file through kernel_setlease.
The disassociation is performed in nfsd4_delegreturn via the following
call chain:
nfsd4_delegreturn --> destroy_delegation --> destroy_unhashed_deleg -->
nfs4_unlock_deleg_lease --> kernel_setlease --> generic_delete_lease
The corresponding sc_count reference will be released after this
disassociation.
Since nfsd_break_one_deleg executes while holding the flc_lock, the
disassociation process becomes blocked when attempting to acquire flc_lock
in generic_delete_lease. This means:
1) sc_count in nfsd_break_one_deleg will not be decremented to 0;
2) The nfs4_put_stid called by nfsd_break_one_deleg will not attempt to
acquire cl_lock;
3) Consequently, no deadlock condition is created.
Given that sc_count in nfsd_break_one_deleg remains non-zero, we can
safely perform refcount_dec on sc_count directly. This approach
effectively avoids triggering deadlock warnings. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: harden block_group::bg_list against list_del() races
As far as I can tell, these calls of list_del_init() on bg_list cannot
run concurrently with btrfs_mark_bg_unused() or btrfs_mark_bg_to_reclaim(),
as they are in transaction error paths and situations where the block
group is readonly.
However, if there is any chance at all of racing with mark_bg_unused(),
or a different future user of bg_list, better to be safe than sorry.
Otherwise we risk the following interleaving (bg_list refcount in parens)
T1 (some random op) T2 (btrfs_mark_bg_unused)
!list_empty(&bg->bg_list); (1)
list_del_init(&bg->bg_list); (1)
list_move_tail (1)
btrfs_put_block_group (0)
btrfs_delete_unused_bgs
bg = list_first_entry
list_del_init(&bg->bg_list);
btrfs_put_block_group(bg); (-1)
Ultimately, this results in a broken ref count that hits zero one deref
early and the real final deref underflows the refcount, resulting in a WARNING. |
| In the Linux kernel, the following vulnerability has been resolved:
tty: Require CAP_SYS_ADMIN for all usages of TIOCL_SELMOUSEREPORT
This requirement was overeagerly loosened in commit 2f83e38a095f
("tty: Permit some TIOCL_SETSEL modes without CAP_SYS_ADMIN"), but as
it turns out,
(1) the logic I implemented there was inconsistent (apologies!),
(2) TIOCL_SELMOUSEREPORT might actually be a small security risk
after all, and
(3) TIOCL_SELMOUSEREPORT is only meant to be used by the mouse
daemon (GPM or Consolation), which runs as CAP_SYS_ADMIN
already.
In more detail:
1. The previous patch has inconsistent logic:
In commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes
without CAP_SYS_ADMIN"), we checked for sel_mode ==
TIOCL_SELMOUSEREPORT, but overlooked that the lower four bits of
this "mode" parameter were actually used as an additional way to
pass an argument. So the patch did actually still require
CAP_SYS_ADMIN, if any of the mouse button bits are set, but did not
require it if none of the mouse buttons bits are set.
This logic is inconsistent and was not intentional. We should have
the same policies for using TIOCL_SELMOUSEREPORT independent of the
value of the "hidden" mouse button argument.
I sent a separate documentation patch to the man page list with
more details on TIOCL_SELMOUSEREPORT:
https://lore.kernel.org/all/[email protected]/
2. TIOCL_SELMOUSEREPORT is indeed a potential security risk which can
let an attacker simulate "keyboard" input to command line
applications on the same terminal, like TIOCSTI and some other
TIOCLINUX "selection mode" IOCTLs.
By enabling mouse reporting on a terminal and then injecting mouse
reports through TIOCL_SELMOUSEREPORT, an attacker can simulate
mouse movements on the same terminal, similar to the TIOCSTI
keystroke injection attacks that were previously possible with
TIOCSTI and other TIOCL_SETSEL selection modes.
Many programs (including libreadline/bash) are then prone to
misinterpret these mouse reports as normal keyboard input because
they do not expect input in the X11 mouse protocol form. The
attacker does not have complete control over the escape sequence,
but they can at least control the values of two consecutive bytes
in the binary mouse reporting escape sequence.
I went into more detail on that in the discussion at
https://lore.kernel.org/all/[email protected]/
It is not equally trivial to simulate arbitrary keystrokes as it
was with TIOCSTI (commit 83efeeeb3d04 ("tty: Allow TIOCSTI to be
disabled")), but the general mechanism is there, and together with
the small number of existing legit use cases (see below), it would
be better to revert back to requiring CAP_SYS_ADMIN for
TIOCL_SELMOUSEREPORT, as it was already the case before
commit 2f83e38a095f ("tty: Permit some TIOCL_SETSEL modes without
CAP_SYS_ADMIN").
3. TIOCL_SELMOUSEREPORT is only used by the mouse daemons (GPM or
Consolation), and they are the only legit use case:
To quote console_codes(4):
The mouse tracking facility is intended to return
xterm(1)-compatible mouse status reports. Because the console
driver has no way to know the device or type of the mouse, these
reports are returned in the console input stream only when the
virtual terminal driver receives a mouse update ioctl. These
ioctls must be generated by a mouse-aware user-mode application
such as the gpm(8) daemon.
Jared Finder has also confirmed in
https://lore.kernel.org/all/[email protected]/
that Emacs does not call TIOCL_SELMOUSEREPORT directly, and it
would be difficult to find good reasons for doing that, given that
it would interfere with the reports that GPM is sending.
More information on the interaction between GPM, terminals and th
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: Fix malformed packet sizing in vmxnet3_process_xdp
vmxnet3 driver's XDP handling is buggy for packet sizes using ring0 (that
is, packet sizes between 128 - 3k bytes).
We noticed MTU-related connectivity issues with Cilium's service load-
balancing in case of vmxnet3 as NIC underneath. A simple curl to a HTTP
backend service where the XDP LB was doing IPIP encap led to overly large
packet sizes but only for *some* of the packets (e.g. HTTP GET request)
while others (e.g. the prior TCP 3WHS) looked completely fine on the wire.
In fact, the pcap recording on the backend node actually revealed that the
node with the XDP LB was leaking uninitialized kernel data onto the wire
for the affected packets, for example, while the packets should have been
152 bytes their actual size was 1482 bytes, so the remainder after 152 bytes
was padded with whatever other data was in that page at the time (e.g. we
saw user/payload data from prior processed packets).
We only noticed this through an MTU issue, e.g. when the XDP LB node and
the backend node both had the same MTU (e.g. 1500) then the curl request
got dropped on the backend node's NIC given the packet was too large even
though the IPIP-encapped packet normally would never even come close to
the MTU limit. Lowering the MTU on the XDP LB (e.g. 1480) allowed to let
the curl request succeed (which also indicates that the kernel ignored the
padding, and thus the issue wasn't very user-visible).
Commit e127ce7699c1 ("vmxnet3: Fix missing reserved tailroom") was too eager
to also switch xdp_prepare_buff() from rcd->len to rbi->len. It really needs
to stick to rcd->len which is the actual packet length from the descriptor.
The latter we also feed into vmxnet3_process_xdp_small(), by the way, and
it indicates the correct length needed to initialize the xdp->{data,data_end}
parts. For e127ce7699c1 ("vmxnet3: Fix missing reserved tailroom") the
relevant part was adapting xdp_init_buff() to address the warning given the
xdp_data_hard_end() depends on xdp->frame_sz. With that fixed, traffic on
the wire looks good again. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis_cdb: use correct rpl size in ethtool_cmis_module_poll()
rpl is passed as a pointer to ethtool_cmis_module_poll(), so the correct
size of rpl is sizeof(*rpl) which should be just 1 byte. Using the
pointer size instead can cause stack corruption:
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ethtool_cmis_wait_for_cond+0xf4/0x100
CPU: 72 UID: 0 PID: 4440 Comm: kworker/72:2 Kdump: loaded Tainted: G OE 6.11.0 #24
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. PowerEdge R760/04GWWM, BIOS 1.6.6 09/20/2023
Workqueue: events module_flash_fw_work
Call Trace:
<TASK>
panic+0x339/0x360
? ethtool_cmis_wait_for_cond+0xf4/0x100
? __pfx_status_success+0x10/0x10
? __pfx_status_fail+0x10/0x10
__stack_chk_fail+0x10/0x10
ethtool_cmis_wait_for_cond+0xf4/0x100
ethtool_cmis_cdb_execute_cmd+0x1fc/0x330
? __pfx_status_fail+0x10/0x10
cmis_cdb_module_features_get+0x6d/0xd0
ethtool_cmis_cdb_init+0x8a/0xd0
ethtool_cmis_fw_update+0x46/0x1d0
module_flash_fw_work+0x17/0xa0
process_one_work+0x179/0x390
worker_thread+0x239/0x340
? __pfx_worker_thread+0x10/0x10
kthread+0xcc/0x100
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2d/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: explicitly disallow disconnect
syzbot discovered that it can disconnect a TLS socket and then
run into all sort of unexpected corner cases. I have a vague
recollection of Eric pointing this out to us a long time ago.
Supporting disconnect is really hard, for one thing if offload
is enabled we'd need to wait for all packets to be _acked_.
Disconnect is not commonly used, disallow it.
The immediate problem syzbot run into is the warning in the strp,
but that's just the easiest bug to trigger:
WARNING: CPU: 0 PID: 5834 at net/tls/tls_strp.c:486 tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
RIP: 0010:tls_strp_msg_load+0x72e/0xa80 net/tls/tls_strp.c:486
Call Trace:
<TASK>
tls_rx_rec_wait+0x280/0xa60 net/tls/tls_sw.c:1363
tls_sw_recvmsg+0x85c/0x1c30 net/tls/tls_sw.c:2043
inet6_recvmsg+0x2c9/0x730 net/ipv6/af_inet6.c:678
sock_recvmsg_nosec net/socket.c:1023 [inline]
sock_recvmsg+0x109/0x280 net/socket.c:1045
__sys_recvfrom+0x202/0x380 net/socket.c:2237 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Acquire a lock on kvm->srcu when userspace is getting MP state to handle a
rather extreme edge case where "accepting" APIC events, i.e. processing
pending INIT or SIPI, can trigger accesses to guest memory. If the vCPU
is in L2 with INIT *and* a TRIPLE_FAULT request pending, then getting MP
state will trigger a nested VM-Exit by way of ->check_nested_events(), and
emuating the nested VM-Exit can access guest memory.
The splat was originally hit by syzkaller on a Google-internal kernel, and
reproduced on an upstream kernel by hacking the triple_fault_event_test
selftest to stuff a pending INIT, store an MSR on VM-Exit (to generate a
memory access on VMX), and do vcpu_mp_state_get() to trigger the scenario.
=============================
WARNING: suspicious RCU usage
6.14.0-rc3-b112d356288b-vmx/pi_lockdep_false_pos-lock #3 Not tainted
-----------------------------
include/linux/kvm_host.h:1058 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by triple_fault_ev/1256:
#0: ffff88810df5a330 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x8b/0x9a0 [kvm]
stack backtrace:
CPU: 11 UID: 1000 PID: 1256 Comm: triple_fault_ev Not tainted 6.14.0-rc3-b112d356288b-vmx #3
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0x90
lockdep_rcu_suspicious+0x144/0x190
kvm_vcpu_gfn_to_memslot+0x156/0x180 [kvm]
kvm_vcpu_read_guest+0x3e/0x90 [kvm]
read_and_check_msr_entry+0x2e/0x180 [kvm_intel]
__nested_vmx_vmexit+0x550/0xde0 [kvm_intel]
kvm_check_nested_events+0x1b/0x30 [kvm]
kvm_apic_accept_events+0x33/0x100 [kvm]
kvm_arch_vcpu_ioctl_get_mpstate+0x30/0x1d0 [kvm]
kvm_vcpu_ioctl+0x33e/0x9a0 [kvm]
__x64_sys_ioctl+0x8b/0xb0
do_syscall_64+0x6c/0x170
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: quota: fix to avoid warning in dquot_writeback_dquots()
F2FS-fs (dm-59): checkpoint=enable has some unwritten data.
------------[ cut here ]------------
WARNING: CPU: 6 PID: 8013 at fs/quota/dquot.c:691 dquot_writeback_dquots+0x2fc/0x308
pc : dquot_writeback_dquots+0x2fc/0x308
lr : f2fs_quota_sync+0xcc/0x1c4
Call trace:
dquot_writeback_dquots+0x2fc/0x308
f2fs_quota_sync+0xcc/0x1c4
f2fs_write_checkpoint+0x3d4/0x9b0
f2fs_issue_checkpoint+0x1bc/0x2c0
f2fs_sync_fs+0x54/0x150
f2fs_do_sync_file+0x2f8/0x814
__f2fs_ioctl+0x1960/0x3244
f2fs_ioctl+0x54/0xe0
__arm64_sys_ioctl+0xa8/0xe4
invoke_syscall+0x58/0x114
checkpoint and f2fs_remount may race as below, resulting triggering warning
in dquot_writeback_dquots().
atomic write remount
- do_remount
- down_write(&sb->s_umount);
- f2fs_remount
- ioctl
- f2fs_do_sync_file
- f2fs_sync_fs
- f2fs_write_checkpoint
- block_operations
- locked = down_read_trylock(&sbi->sb->s_umount)
: fail to lock due to the write lock was held by remount
- up_write(&sb->s_umount);
- f2fs_quota_sync
- dquot_writeback_dquots
- WARN_ON_ONCE(!rwsem_is_locked(&sb->s_umount))
: trigger warning because s_umount lock was unlocked by remount
If checkpoint comes from mount/umount/remount/freeze/quotactl, caller of
checkpoint has already held s_umount lock, calling dquot_writeback_dquots()
in the context should be safe.
So let's record task to sbi->umount_lock_holder, so that checkpoint can
know whether the lock has held in the context or not by checking current
w/ it.
In addition, in order to not misrepresent caller of checkpoint, we should
not allow to trigger async checkpoint for those callers: mount/umount/remount/
freeze/quotactl. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-bitmap: fix wrong bitmap_limit for clustermd when write sb
In clustermd, separate write-intent-bitmaps are used for each cluster
node:
0 4k 8k 12k
-------------------------------------------------------------------
| idle | md super | bm super [0] + bits |
| bm bits[0, contd] | bm super[1] + bits | bm bits[1, contd] |
| bm super[2] + bits | bm bits [2, contd] | bm super[3] + bits |
| bm bits [3, contd] | | |
So in node 1, pg_index in __write_sb_page() could equal to
bitmap->storage.file_pages. Then bitmap_limit will be calculated to
0. md_super_write() will be called with 0 size.
That means the first 4k sb area of node 1 will never be updated
through filemap_write_page().
This bug causes hang of mdadm/clustermd_tests/01r1_Grow_resize.
Here use (pg_index % bitmap->storage.file_pages) to make calculation
of bitmap_limit correct. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix using untrusted value of pkt_len in ice_vc_fdir_parse_raw()
Fix using the untrusted value of proto->raw.pkt_len in function
ice_vc_fdir_parse_raw() by verifying if it does not exceed the
VIRTCHNL_MAX_SIZE_RAW_PACKET value. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't clobber ret in btrfs_validate_super()
Commit 2a9bb78cfd36 ("btrfs: validate system chunk array at
btrfs_validate_super()") introduces a call to validate_sys_chunk_array()
in btrfs_validate_super(), which clobbers the value of ret set earlier.
This has the effect of negating the validity checks done earlier, making
it so btrfs could potentially try to mount invalid filesystems. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Mask the bd_cnt field in the TX BD properly
The bd_cnt field in the TX BD specifies the total number of BDs for
the TX packet. The bd_cnt field has 5 bits and the maximum number
supported is 32 with the value 0.
CONFIG_MAX_SKB_FRAGS can be modified and the total number of SKB
fragments can approach or exceed the maximum supported by the chip.
Add a macro to properly mask the bd_cnt field so that the value 32
will be properly masked and set to 0 in the bd_cnd field.
Without this patch, the out-of-range bd_cnt value will corrupt the
TX BD and may cause TX timeout.
The next patch will check for values exceeding 32. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix kernel panic during FW release
This fixes a kernel panic seen during release FW in a stress test
scenario where WLAN and BT FW download occurs simultaneously, and due to
a HW bug, chip sends out only 1 bootloader signatures.
When driver receives the bootloader signature, it enters FW download
mode, but since no consequtive bootloader signatures seen, FW file is
not requested.
After 60 seconds, when FW download times out, release_firmware causes a
kernel panic.
[ 2601.949184] Unable to handle kernel paging request at virtual address 0000312e6f006573
[ 2601.992076] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000111802000
[ 2601.992080] [0000312e6f006573] pgd=0000000000000000, p4d=0000000000000000
[ 2601.992087] Internal error: Oops: 0000000096000021 [#1] PREEMPT SMP
[ 2601.992091] Modules linked in: algif_hash algif_skcipher af_alg btnxpuart(O) pciexxx(O) mlan(O) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce snd_soc_fsl_easrc snd_soc_fsl_asoc_card imx8_media_dev(C) snd_soc_fsl_micfil polyval_generic snd_soc_fsl_xcvr snd_soc_fsl_sai snd_soc_imx_audmux snd_soc_fsl_asrc snd_soc_imx_card snd_soc_imx_hdmi snd_soc_fsl_aud2htx snd_soc_fsl_utils imx_pcm_dma dw_hdmi_cec flexcan can_dev
[ 2602.001825] CPU: 2 PID: 20060 Comm: hciconfig Tainted: G C O 6.6.23-lts-next-06236-gb586a521770e #1
[ 2602.010182] Hardware name: NXP i.MX8MPlus EVK board (DT)
[ 2602.010185] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 2602.010191] pc : _raw_spin_lock+0x34/0x68
[ 2602.010201] lr : free_fw_priv+0x20/0xfc
[ 2602.020561] sp : ffff800089363b30
[ 2602.020563] x29: ffff800089363b30 x28: ffff0000d0eb5880 x27: 0000000000000000
[ 2602.020570] x26: 0000000000000000 x25: ffff0000d728b330 x24: 0000000000000000
[ 2602.020577] x23: ffff0000dc856f38
[ 2602.033797] x22: ffff800089363b70 x21: ffff0000dc856000
[ 2602.033802] x20: ff00312e6f006573 x19: ffff0000d0d9ea80 x18: 0000000000000000
[ 2602.033809] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaad80dd480
[ 2602.083320] x14: 0000000000000000 x13: 00000000000001b9 x12: 0000000000000002
[ 2602.083326] x11: 0000000000000000 x10: 0000000000000a60 x9 : ffff800089363a30
[ 2602.083333] x8 : ffff0001793d75c0 x7 : ffff0000d6dbc400 x6 : 0000000000000000
[ 2602.083339] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000001
[ 2602.083346] x2 : 0000000000000000 x1 : 0000000000000001 x0 : ff00312e6f006573
[ 2602.083354] Call trace:
[ 2602.083356] _raw_spin_lock+0x34/0x68
[ 2602.083364] release_firmware+0x48/0x6c
[ 2602.083370] nxp_setup+0x3c4/0x540 [btnxpuart]
[ 2602.083383] hci_dev_open_sync+0xf0/0xa34
[ 2602.083391] hci_dev_open+0xd8/0x178
[ 2602.083399] hci_sock_ioctl+0x3b0/0x590
[ 2602.083405] sock_do_ioctl+0x60/0x118
[ 2602.083413] sock_ioctl+0x2f4/0x374
[ 2602.091430] __arm64_sys_ioctl+0xac/0xf0
[ 2602.091437] invoke_syscall+0x48/0x110
[ 2602.091445] el0_svc_common.constprop.0+0xc0/0xe0
[ 2602.091452] do_el0_svc+0x1c/0x28
[ 2602.091457] el0_svc+0x40/0xe4
[ 2602.091465] el0t_64_sync_handler+0x120/0x12c
[ 2602.091470] el0t_64_sync+0x190/0x194 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/pat: Fix VM_PAT handling when fork() fails in copy_page_range()
If track_pfn_copy() fails, we already added the dst VMA to the maple
tree. As fork() fails, we'll cleanup the maple tree, and stumble over
the dst VMA for which we neither performed any reservation nor copied
any page tables.
Consequently untrack_pfn() will see VM_PAT and try obtaining the
PAT information from the page table -- which fails because the page
table was not copied.
The easiest fix would be to simply clear the VM_PAT flag of the dst VMA
if track_pfn_copy() fails. However, the whole thing is about "simply"
clearing the VM_PAT flag is shaky as well: if we passed track_pfn_copy()
and performed a reservation, but copying the page tables fails, we'll
simply clear the VM_PAT flag, not properly undoing the reservation ...
which is also wrong.
So let's fix it properly: set the VM_PAT flag only if the reservation
succeeded (leaving it clear initially), and undo the reservation if
anything goes wrong while copying the page tables: clearing the VM_PAT
flag after undoing the reservation.
Note that any copied page table entries will get zapped when the VMA will
get removed later, after copy_page_range() succeeded; as VM_PAT is not set
then, we won't try cleaning VM_PAT up once more and untrack_pfn() will be
happy. Note that leaving these page tables in place without a reservation
is not a problem, as we are aborting fork(); this process will never run.
A reproducer can trigger this usually at the first try:
https://gitlab.com/davidhildenbrand/scratchspace/-/raw/main/reproducers/pat_fork.c
WARNING: CPU: 26 PID: 11650 at arch/x86/mm/pat/memtype.c:983 get_pat_info+0xf6/0x110
Modules linked in: ...
CPU: 26 UID: 0 PID: 11650 Comm: repro3 Not tainted 6.12.0-rc5+ #92
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
RIP: 0010:get_pat_info+0xf6/0x110
...
Call Trace:
<TASK>
...
untrack_pfn+0x52/0x110
unmap_single_vma+0xa6/0xe0
unmap_vmas+0x105/0x1f0
exit_mmap+0xf6/0x460
__mmput+0x4b/0x120
copy_process+0x1bf6/0x2aa0
kernel_clone+0xab/0x440
__do_sys_clone+0x66/0x90
do_syscall_64+0x95/0x180
Likely this case was missed in:
d155df53f310 ("x86/mm/pat: clear VM_PAT if copy_p4d_range failed")
... and instead of undoing the reservation we simply cleared the VM_PAT flag.
Keep the documentation of these functions in include/linux/pgtable.h,
one place is more than sufficient -- we should clean that up for the other
functions like track_pfn_remap/untrack_pfn separately. |
| In the Linux kernel, the following vulnerability has been resolved:
spufs: fix gang directory lifetimes
prior to "[POWERPC] spufs: Fix gang destroy leaks" we used to have
a problem with gang lifetimes - creation of a gang returns opened
gang directory, which normally gets removed when that gets closed,
but if somebody has created a context belonging to that gang and
kept it alive until the gang got closed, removal failed and we
ended up with a leak.
Unfortunately, it had been fixed the wrong way. Dentry of gang
directory was no longer pinned, and rmdir on close was gone.
One problem was that failure of open kept calling simple_rmdir()
as cleanup, which meant an unbalanced dput(). Another bug was
in the success case - gang creation incremented link count on
root directory, but that was no longer undone when gang got
destroyed.
Fix consists of
* reverting the commit in question
* adding a counter to gang, protected by ->i_rwsem
of gang directory inode.
* having it set to 1 at creation time, dropped
in both spufs_dir_close() and spufs_gang_close() and bumped
in spufs_create_context(), provided that it's not 0.
* using simple_recursive_removal() to take the gang
directory out when counter reaches zero. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix qid report in airoha_tc_get_htb_get_leaf_queue()
Fix the following kernel warning deleting HTB offloaded leafs and/or root
HTB qdisc in airoha_eth driver properly reporting qid in
airoha_tc_get_htb_get_leaf_queue routine.
$tc qdisc replace dev eth1 root handle 10: htb offload
$tc class add dev eth1 arent 10: classid 10:4 htb rate 100mbit ceil 100mbit
$tc qdisc replace dev eth1 parent 10:4 handle 4: ets bands 8 \
quanta 1514 3028 4542 6056 7570 9084 10598 12112
$tc qdisc del dev eth1 root
[ 55.827864] ------------[ cut here ]------------
[ 55.832493] WARNING: CPU: 3 PID: 2678 at 0xffffffc0798695a4
[ 55.956510] CPU: 3 PID: 2678 Comm: tc Tainted: G O 6.6.71 #0
[ 55.963557] Hardware name: Airoha AN7581 Evaluation Board (DT)
[ 55.969383] pstate: 20400005 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 55.976344] pc : 0xffffffc0798695a4
[ 55.979851] lr : 0xffffffc079869a20
[ 55.983358] sp : ffffffc0850536a0
[ 55.986665] x29: ffffffc0850536a0 x28: 0000000000000024 x27: 0000000000000001
[ 55.993800] x26: 0000000000000000 x25: ffffff8008b19000 x24: ffffff800222e800
[ 56.000935] x23: 0000000000000001 x22: 0000000000000000 x21: ffffff8008b19000
[ 56.008071] x20: ffffff8002225800 x19: ffffff800379d000 x18: 0000000000000000
[ 56.015206] x17: ffffffbf9ea59000 x16: ffffffc080018000 x15: 0000000000000000
[ 56.022342] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000001
[ 56.029478] x11: ffffffc081471008 x10: ffffffc081575a98 x9 : 0000000000000000
[ 56.036614] x8 : ffffffc08167fd40 x7 : ffffffc08069e104 x6 : ffffff8007f86000
[ 56.043748] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000001
[ 56.050884] x2 : 0000000000000000 x1 : 0000000000000250 x0 : ffffff800222c000
[ 56.058020] Call trace:
[ 56.060459] 0xffffffc0798695a4
[ 56.063618] 0xffffffc079869a20
[ 56.066777] __qdisc_destroy+0x40/0xa0
[ 56.070528] qdisc_put+0x54/0x6c
[ 56.073748] qdisc_graft+0x41c/0x648
[ 56.077324] tc_get_qdisc+0x168/0x2f8
[ 56.080978] rtnetlink_rcv_msg+0x230/0x330
[ 56.085076] netlink_rcv_skb+0x5c/0x128
[ 56.088913] rtnetlink_rcv+0x14/0x1c
[ 56.092490] netlink_unicast+0x1e0/0x2c8
[ 56.096413] netlink_sendmsg+0x198/0x3c8
[ 56.100337] ____sys_sendmsg+0x1c4/0x274
[ 56.104261] ___sys_sendmsg+0x7c/0xc0
[ 56.107924] __sys_sendmsg+0x44/0x98
[ 56.111492] __arm64_sys_sendmsg+0x20/0x28
[ 56.115580] invoke_syscall.constprop.0+0x58/0xfc
[ 56.120285] do_el0_svc+0x3c/0xbc
[ 56.123592] el0_svc+0x18/0x4c
[ 56.126647] el0t_64_sync_handler+0x118/0x124
[ 56.131005] el0t_64_sync+0x150/0x154
[ 56.134660] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
net: decrease cached dst counters in dst_release
Upstream fix ac888d58869b ("net: do not delay dst_entries_add() in
dst_release()") moved decrementing the dst count from dst_destroy to
dst_release to avoid accessing already freed data in case of netns
dismantle. However in case CONFIG_DST_CACHE is enabled and OvS+tunnels
are used, this fix is incomplete as the same issue will be seen for
cached dsts:
Unable to handle kernel paging request at virtual address ffff5aabf6b5c000
Call trace:
percpu_counter_add_batch+0x3c/0x160 (P)
dst_release+0xec/0x108
dst_cache_destroy+0x68/0xd8
dst_destroy+0x13c/0x168
dst_destroy_rcu+0x1c/0xb0
rcu_do_batch+0x18c/0x7d0
rcu_core+0x174/0x378
rcu_core_si+0x18/0x30
Fix this by invalidating the cache, and thus decrementing cached dst
counters, in dst_release too. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Increase ARCH_DMA_MINALIGN up to 16
ARCH_DMA_MINALIGN is 1 by default, but some LoongArch-specific devices
(such as APBDMA) require 16 bytes alignment. When the data buffer length
is too small, the hardware may make an error writing cacheline. Thus, it
is dangerous to allocate a small memory buffer for DMA. It's always safe
to define ARCH_DMA_MINALIGN as L1_CACHE_BYTES but unnecessary (kmalloc()
need small memory objects). Therefore, just increase it to 16. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: BPF: Don't override subprog's return value
The verifier test `calls: div by 0 in subprog` triggers a panic at the
ld.bu instruction. The ld.bu insn is trying to load byte from memory
address returned by the subprog. The subprog actually set the correct
address at the a5 register (dedicated register for BPF return values).
But at commit 73c359d1d356 ("LoongArch: BPF: Sign-extend return values")
we also sign extended a5 to the a0 register (return value in LoongArch).
For function call insn, we later propagate the a0 register back to a5
register. This is right for native calls but wrong for bpf2bpf calls
which expect zero-extended return value in a5 register. So only move a0
to a5 for native calls (i.e. non-BPF_PSEUDO_CALL). |
| In the Linux kernel, the following vulnerability has been resolved:
x86/microcode/AMD: Fix __apply_microcode_amd()'s return value
When verify_sha256_digest() fails, __apply_microcode_amd() should propagate
the failure by returning false (and not -1 which is promoted to true). |
