| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Buffer Overflow vulnerability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via the libavfilter/f_reverse.c:269:26 in areverse_request_frame. |
| The extract_name function in Fluent Bit in_docker input plugin copies container names into a fixed size stack buffer without validating length. An attacker who can create containers or control container names, can supply a long name that overflows the buffer, leading to process crash or arbitrary code execution. |
| Buffer Overflow vulnerability in Ffmpeg v.N113007-g8d24a28d06 allows a local attacker to execute arbitrary code via a floating point exception (FPE) error at libavfilter/vf_minterpolate.c:1078:60 in interpolate. |
| Multiple vulnerabilities in the Cisco Discovery Protocol and Link Layer Discovery Protocol (LLDP) implementations for Cisco IP Phone Series 68xx/78xx/88xx could allow an unauthenticated, adjacent attacker to execute code remotely or cause a reload of an affected IP phone.
These vulnerabilities are due to missing checks when the IP phone processes a Cisco Discovery Protocol or LLDP packet. An attacker could exploit these vulnerabilities by sending a malicious Cisco Discovery Protocol or LLDP packet to the targeted IP phone. A successful exploit could allow the attacker to execute code on the affected IP phone or cause it to reload unexpectedly, resulting in a denial of service (DoS) condition.Note: Cisco Discovery Protocol is a Layer 2 protocol. To exploit these vulnerabilities, an attacker must be in the same broadcast domain as the affected device (Layer 2 adjacent).Cisco has released software updates that address these vulnerabilities. There are no workarounds that address these vulnerabilities. |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains an administrator account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following version:
QTS 5.2.8.3332 build 20251128 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.0.3192 build 20250716 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.0.3192 build 20250716 and later |
| A buffer overflow vulnerability has been reported to affect several QNAP operating system versions. If a remote attacker gains a user account, they can then exploit the vulnerability to modify memory or crash processes.
We have already fixed the vulnerability in the following versions:
QTS 5.2.7.3256 build 20250913 and later
QuTS hero h5.2.7.3256 build 20250913 and later
QuTS hero h5.3.0.3192 build 20250716 and later |
| A vulnerability has been found in UTT 进取 512W up to 1.7.7-171114. Affected by this issue is the function strcpy of the file /goform/formP2PLimitConfig. Such manipulation of the argument except leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark bpf prog stack with kmsan_unposion_memory in interpreter mode
syzbot reported uninit memory usages during map_{lookup,delete}_elem.
==========
BUG: KMSAN: uninit-value in __dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline]
BUG: KMSAN: uninit-value in dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796
__dev_map_lookup_elem kernel/bpf/devmap.c:441 [inline]
dev_map_lookup_elem+0xf3/0x170 kernel/bpf/devmap.c:796
____bpf_map_lookup_elem kernel/bpf/helpers.c:42 [inline]
bpf_map_lookup_elem+0x5c/0x80 kernel/bpf/helpers.c:38
___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997
__bpf_prog_run256+0xb5/0xe0 kernel/bpf/core.c:2237
==========
The reproducer should be in the interpreter mode.
The C reproducer is trying to run the following bpf prog:
0: (18) r0 = 0x0
2: (18) r1 = map[id:49]
4: (b7) r8 = 16777216
5: (7b) *(u64 *)(r10 -8) = r8
6: (bf) r2 = r10
7: (07) r2 += -229
^^^^^^^^^^
8: (b7) r3 = 8
9: (b7) r4 = 0
10: (85) call dev_map_lookup_elem#1543472
11: (95) exit
It is due to the "void *key" (r2) passed to the helper. bpf allows uninit
stack memory access for bpf prog with the right privileges. This patch
uses kmsan_unpoison_memory() to mark the stack as initialized.
This should address different syzbot reports on the uninit "void *key"
argument during map_{lookup,delete}_elem. |
| In the Linux kernel, the following vulnerability has been resolved:
jfs: xattr: fix buffer overflow for invalid xattr
When an xattr size is not what is expected, it is printed out to the
kernel log in hex format as a form of debugging. But when that xattr
size is bigger than the expected size, printing it out can cause an
access off the end of the buffer.
Fix this all up by properly restricting the size of the debug hex dump
in the kernel log. |
| A Buffer overflow vulnerability in function fromAdvSetMacMtuWan of bin httpd in Tenda AC10V4.0 V16.03.10.20 allows remote attackers to cause denial of service and possibly code execution by sending a post request with a crafted payload (field `serviceName`) to /goform/AdvSetMacMtuWan. |
| A Buffer overflow vulnerability in function fromAdvSetMacMtuWan of bin httpd in Tenda AC10V4.0 V16.03.10.20 allows remote attackers to cause denial of service and possibly code execution by sending a post request with a crafted payload (field `serverName`) to /goform/AdvSetMacMtuWan. |
| Capstone is a disassembly framework. In versions 6.0.0-Alpha5 and prior, an unchecked vsnprintf return in SStream_concat lets a malicious cs_opt_mem.vsnprintf drive SStream’s index negative or past the end, leading to a stack buffer underflow/overflow when the next write occurs. Commit 2c7797182a1618be12017d7d41e0b6581d5d529e fixes the issue. |
| FAST FAC1200R F400_FAC1200R_Q is vulnerable to Buffer Overflow in the function sub_80435780 via the parameter password. |
| FAST FAC1200R F400_FAC1200R_Q is vulnerable to Buffer Overflow in the function sub_80435780 via the parameter string fac_password. |
| igmpproxy 0.4 before commit 2b30c36 allows remote attackers to cause a denial of service (application crash) via a crafted IGMPv3 membership report packet with a malicious source address. Due to insufficient validation in the `recv_igmp()` function in src/igmpproxy.c, an invalid group record type can trigger a NULL pointer dereference when logging the address using `inet_fmtsrc()`. This vulnerability can be exploited by sending malformed multicast traffic to a host running igmpproxy, leading to a crash. igmpproxy is used in various embedded networking environments and consumer-grade IoT devices (such as home routers and media gateways) to handle multicast traffic for IPTV and other streaming services. Affected devices that rely on unpatched versions of igmpproxy may be vulnerable to remote denial-of-service attacks across a LAN . |
| A vulnerability was identified in UTT 进取 512W up to 1.7.7-171114. Impacted is the function strcpy of the file /goform/ConfigExceptMSN. Such manipulation of the argument remark leads to buffer overflow. It is possible to launch the attack remotely. The exploit is publicly available and might be used. |
| A vulnerability was determined in UTT 进取 512W up to 1.7.7-171114. This issue affects the function strcpy of the file /goform/formPictureUrl. This manipulation of the argument importpictureurl causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been publicly disclosed and may be utilized. |
| A vulnerability was found in UTT 进取 512W up to 1.7.7-171114. This vulnerability affects the function strcpy of the file /goform/formConfigNoticeConfig. The manipulation of the argument timestart results in buffer overflow. The attack may be performed from remote. The exploit has been made public and could be used. |
