| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| AdTran Personal Phone Manager 10.8.1 software is vulnerable to an issue that allows for exfiltration of data over DNS. This could allow for exposed AdTran Personal Phone Manager web servers to be used as DNS redirectors to tunnel arbitrary data over DNS. NOTE: The affected appliances NetVanta 7060 and NetVanta 7100 are considered End of Life and as such this issue will not be patched. |
| Wondershare LTD Dr. Fone as of 2021-12-06 version is affected by Remote code execution. Due to software design flaws an unauthenticated user can communicate over UDP with the "InstallAssistService.exe" service(the service is running under SYSTEM privileges) and manipulate it to execute malicious executable without any validation from a remote location and gain SYSTEM privileges |
| In the Linux kernel, the following vulnerability has been resolved:
debugobjects: Do not fill_pool() if pi_blocked_on
On RT enabled kernels, fill_pool() ends up calling rtlock_lock(), which
asserts if current::pi_blocked_on is set, because a task can obviously only
block on one lock as otherwise the priority inheritenace chain gets
corrupted.
Prevent this by expanding the conditional to take current::pi_blocked_on
into account. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the ACK parser to extract the SACK table for parsing
Fix modification of the received skbuff in rxrpc_input_soft_acks() and a
potential incorrect access of the buffer in a fragmented UDP packet (the
packet would probably have to be deliberately pre-generated as fragmented)
when AF_RXRPC tries to extract the contents of the SACK table by copying
out the contents of the SACK table into a buffer before attempting to parse
AF_RXRPC assumes that it can just call skb_condense() and then validly
access the SACK table from skb->data and that it will be a flat buffer -
but skb_condense() can silently fail to do anything under some
circumstances.
Note that whilst rxrpc_input_soft_acks() should be able to parse extended
ACKs, the rest of AF_RXRPC doesn't currently support that.
Further, there's then no need to call skb_condense() in rxrpc_input_ack(),
so don't. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Skip CSD when it has zeroed workgroups
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: 3ad: implement proper RCU rules for port->aggregator
syzbot found a data-race in bond_3ad_get_active_agg_info /
bond_3ad_state_machine_handler [1] which hints at lack of proper
RCU implementation.
Add __rcu qualifier to port->aggregator, and add proper RCU API.
[1]
BUG: KCSAN: data-race in bond_3ad_get_active_agg_info / bond_3ad_state_machine_handler
write to 0xffff88813cf5c4b0 of 8 bytes by task 36 on cpu 0:
ad_port_selection_logic drivers/net/bonding/bond_3ad.c:1659 [inline]
bond_3ad_state_machine_handler+0x9d5/0x2d60 drivers/net/bonding/bond_3ad.c:2569
process_one_work kernel/workqueue.c:3302 [inline]
process_scheduled_works+0x4f0/0x9c0 kernel/workqueue.c:3385
worker_thread+0x58a/0x780 kernel/workqueue.c:3466
kthread+0x22a/0x280 kernel/kthread.c:436
ret_from_fork+0x146/0x330 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
read to 0xffff88813cf5c4b0 of 8 bytes by task 22063 on cpu 1:
__bond_3ad_get_active_agg_info drivers/net/bonding/bond_3ad.c:2858 [inline]
bond_3ad_get_active_agg_info+0x8c/0x230 drivers/net/bonding/bond_3ad.c:2881
bond_fill_info+0xe0f/0x10f0 drivers/net/bonding/bond_netlink.c:853
rtnl_link_info_fill net/core/rtnetlink.c:906 [inline]
rtnl_link_fill+0x1d7/0x4e0 net/core/rtnetlink.c:927
rtnl_fill_ifinfo+0xf8e/0x1380 net/core/rtnetlink.c:2168
rtmsg_ifinfo_build_skb+0x11c/0x1b0 net/core/rtnetlink.c:4453
rtmsg_ifinfo_event net/core/rtnetlink.c:4486 [inline]
rtmsg_ifinfo+0x6d/0x110 net/core/rtnetlink.c:4495
__dev_notify_flags+0x76/0x390 net/core/dev.c:9790
netif_change_flags+0xac/0xd0 net/core/dev.c:9823
do_setlink+0x905/0x2950 net/core/rtnetlink.c:3180
rtnl_group_changelink net/core/rtnetlink.c:3813 [inline]
__rtnl_newlink net/core/rtnetlink.c:3981 [inline]
rtnl_newlink+0xf55/0x1400 net/core/rtnetlink.c:4109
rtnetlink_rcv_msg+0x64b/0x720 net/core/rtnetlink.c:6995
netlink_rcv_skb+0x123/0x220 net/netlink/af_netlink.c:2550
rtnetlink_rcv+0x1c/0x30 net/core/rtnetlink.c:7022
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5a8/0x680 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x5c8/0x6f0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:787 [inline]
__sock_sendmsg net/socket.c:802 [inline]
____sys_sendmsg+0x563/0x5b0 net/socket.c:2698
___sys_sendmsg+0x195/0x1e0 net/socket.c:2752
__sys_sendmsg net/socket.c:2784 [inline]
__do_sys_sendmsg net/socket.c:2789 [inline]
__se_sys_sendmsg net/socket.c:2787 [inline]
__x64_sys_sendmsg+0xd4/0x160 net/socket.c:2787
x64_sys_call+0x194c/0x3020 arch/x86/include/generated/asm/syscalls_64.h:47
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x12c/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
value changed: 0x0000000000000000 -> 0xffff88813cf5c400
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 UID: 0 PID: 22063 Comm: syz.0.31122 Tainted: G W syzkaller #0 PREEMPT(full)
Tainted: [W]=WARN
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/18/2026 |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Reject SIOCATMARK on non-stream sockets
SIOCATMARK reports whether the receive queue is at the urgent mark for
MSG_OOB.
In AF_UNIX, MSG_OOB is supported only for SOCK_STREAM sockets.
SOCK_DGRAM and SOCK_SEQPACKET reject MSG_OOB in sendmsg() and recvmsg(),
so they should not support SIOCATMARK either.
Return -EOPNOTSUPP for non-stream sockets before checking the receive
queue. |
| In the Linux kernel, the following vulnerability has been resolved:
ip6_vti: set netns_immutable on the fallback device.
john1988 and Noam Rathaus reported that vti6_init_net() does not set the
netns_immutable flag on the per-netns fallback tunnel device (ip6_vti0).
Other similar tunnel drivers (like ip6_tunnel, sit, ip6_gre, and ip_tunnel)
correctly set this flag during their fallback device initialization to
prevent them from being moved to another network namespace. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: fix overlayfs mmap() and mprotect() access checks
The existing SELinux security model for overlayfs is to allow access if
the current task is able to access the top level file (the "user" file)
and the mounter's credentials are sufficient to access the lower
level file (the "backing" file). Unfortunately, the current code does
not properly enforce these access controls for both mmap() and mprotect()
operations on overlayfs filesystems.
This patch makes use of the newly created security_mmap_backing_file()
LSM hook to provide the missing backing file enforcement for mmap()
operations, and leverages the backing file API and new LSM blob to
provide the necessary information to properly enforce the mprotect()
access controls. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: Fix potential unregister of netdev that has not been registered yet
If an error occurs during register_netdev() for the first MAC in
cpsw_register_ports(), even though cpsw->slaves[0].ndev is set to NULL,
cpsw->slaves[1].ndev would remain unchanged. This could later cause
cpsw_unregister_ports() to attempt unregistering the second MAC.
To address this, add a check for ndev->reg_state before calling
unregister_netdev(). With this change, setting cpsw->slaves[i].ndev
to NULL becomes unnecessary and can be removed accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject sleepable kprobe_multi programs at attach time
kprobe.multi programs run in atomic/RCU context and cannot sleep.
However, bpf_kprobe_multi_link_attach() did not validate whether the
program being attached had the sleepable flag set, allowing sleepable
helpers such as bpf_copy_from_user() to be invoked from a non-sleepable
context.
This causes a "sleeping function called from invalid context" splat:
BUG: sleeping function called from invalid context at ./include/linux/uaccess.h:169
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1787, name: sudo
preempt_count: 1, expected: 0
RCU nest depth: 2, expected: 0
Fix this by rejecting sleepable programs early in
bpf_kprobe_multi_link_attach(), before any further processing. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: always walk all pending catchall elements
During transaction processing we might have more than one catchall element:
1 live catchall element and 1 pending element that is coming as part of the
new batch.
If the map holding the catchall elements is also going away, its
required to toggle all catchall elements and not just the first viable
candidate.
Otherwise, we get:
WARNING: ./include/net/netfilter/nf_tables.h:1281 at nft_data_release+0xb7/0xe0 [nf_tables], CPU#2: nft/1404
RIP: 0010:nft_data_release+0xb7/0xe0 [nf_tables]
[..]
__nft_set_elem_destroy+0x106/0x380 [nf_tables]
nf_tables_abort_release+0x348/0x8d0 [nf_tables]
nf_tables_abort+0xcf2/0x3ac0 [nf_tables]
nfnetlink_rcv_batch+0x9c9/0x20e0 [..] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: unconditionally bump set->nelems before insertion
In case that the set is full, a new element gets published then removed
without waiting for the RCU grace period, while RCU reader can be
walking over it already.
To address this issue, add the element transaction even if set is full,
but toggle the set_full flag to report -ENFILE so the abort path safely
unwinds the set to its previous state.
As for element updates, decrement set->nelems to restore it.
A simpler fix is to call synchronize_rcu() in the error path.
However, with a large batch adding elements to already maxed-out set,
this could cause noticeable slowdown of such batches. |
| A flaw was found in Samba’s handling of NTFS-style reparse points on shares configured with read only = yes. Due to missing SMB-layer access checks, authenticated users with underlying filesystem write permissions may create or delete reparse point metadata through SMB operations even on read-only exports. This could allow modification of SMB-visible file behavior, including converting files into symbolic links or other reparse point types. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmem: layouts: onie-tlv: fix hang on unknown types
The EEPROM on my board has a vendor specific entry of type 0x41. When
stumbling upon that, this driver hangs in an endless loop.
Fix it by keep incrementing the offset on unknown entries, so the loop
will eventually stop. |
| In Eclipse Mosquitto versions 2.0.7 and earlier, the server will crash if the client tries to send a PUBLISH packet with topic length = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: mm: call pagetable dtor when freeing hot-removed page tables
Since 5e8eb9aeeda3 ("arm64: mm: always call PTE/PMD ctor in
__create_pgd_mapping()") page-table allocation on ARM64 always calls
pagetable_{pte,pmd,pud,p4d}_ctor(). This sets the page_type to
PGTY_table, increments NR_PAGETABLE and possible allocates a PTL. However
the matching pagetable_dtor() calls were never added.
With DEBUG_VM enabled on kernel versions prior to v6.17 without
2dfcd1608f3a9 ("mm/page_alloc: let page freeing clear any set page type")
this leads to the following warning when freeing these pages due to
page->page_type sharing page->_mapcount:
BUG: Bad page state in process ... pfn:284fbb
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x284fbb
flags: 0x17fffc000000000(node=0|zone=2|lastcpupid=0x1ffff)
page_type: f2(table)
page dumped because: nonzero mapcount
Call trace:
bad_page+0x13c/0x160
__free_frozen_pages+0x6cc/0x860
___free_pages+0xf4/0x180
free_pages+0x54/0x80
free_hotplug_page_range.part.0+0x58/0x90
free_empty_tables+0x438/0x500
__remove_pgd_mapping.constprop.0+0x60/0xa8
arch_remove_memory+0x48/0x80
try_remove_memory+0x158/0x1d8
offline_and_remove_memory+0x138/0x180
It can also lead to leaking the ptl allocation if ALLOC_SPLIT_PTLOCKS is
defined and incorrect NR_PAGETABLE stats. Fix this by calling
pagetable_dtor() in free_hotplug_pgtable_page() prior to freeing the page
to undo the effects of calling pagetable_*_ctor(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mincore: handle non-swap entries before !CONFIG_SWAP guard
mincore_swap() also fields migration/hwpoison entries (and shmem
swapin-error entries), which can exist on !CONFIG_SWAP builds when
CONFIG_MIGRATION or CONFIG_MEMORY_FAILURE is enabled. The
!IS_ENABLED(CONFIG_SWAP) guard ran before the non-swap-entry early return,
so mincore_pte_range() can spuriously WARN and report these pages
nonresident on !CONFIG_SWAP kernels.
Move the guard below the non-swap-entry check so only true swap entries
trip the WARN, and migration/hwpoison entries take the existing "uptodate
/ non-shmem" path. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9475/1: entry: use byte load for KASAN VMAP stack shadow
Commit 44e9a3bb76e5 ("ARM: 9430/1: entry: Do a dummy read from
VMAP shadow") added a dummy read from the KASAN VMAP stack shadow in
__switch_to(). The read uses ldr, but the KASAN shadow address is
byte-granular and is not guaranteed to be word aligned.
ARMv5 faults unaligned word loads. With CONFIG_KASAN_VMALLOC and
CONFIG_VMAP_STACK enabled, ARM926/VersatilePB crashes in __switch_to()
with an alignment exception before reaching init.
Use ldrb for the dummy shadow access. The code only needs to fault in the
shadow mapping if the stack shadow is missing, so a byte load is sufficient
and matches the granularity of KASAN shadow memory. |
