| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the Internet Key Exchange version 1 (IKEv1) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper management of system memory. An attacker could exploit this vulnerability by sending malicious IKEv1 traffic to an affected device. The attacker does not need valid credentials to authenticate the VPN session, nor does the attacker's source address need to match a peer statement in the crypto map applied to the ingress interface of the affected device. An exploit could allow the attacker to exhaust system memory resources, leading to a reload of an affected device. |
| A vulnerability in the IP fragment-handling implementation of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a memory leak on an affected device. This memory leak could prevent traffic from being processed through the device, resulting in a denial of service (DoS) condition. The vulnerability is due to improper error handling when specific failures occur during IP fragment reassembly. An attacker could exploit this vulnerability by sending crafted, fragmented IP traffic to a targeted device. A successful exploit could allow the attacker to continuously consume memory on the affected device and eventually impact traffic, resulting in a DoS condition. The device could require a manual reboot to recover from the DoS condition. Note: This vulnerability applies to both IP Version 4 (IPv4) and IP Version 6 (IPv6) traffic. |
| A vulnerability in the TLS 1.3 implementation for a specific cipher for Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software for Cisco Firepower 3100 and 4200 Series devices could allow an authenticated, remote attacker to consume resources that are associated with incoming TLS 1.3 connections, which eventually could cause the device to stop accepting any new SSL/TLS or VPN requests.
This vulnerability is due to the implementation of the TLS 1.3 Cipher TLS_CHACHA20_POLY1305_SHA256. An attacker could exploit this vulnerability by sending a large number of TLS 1.3 connections with the specific TLS 1.3 Cipher TLS_CHACHA20_POLY1305_SHA256. A successful exploit could allow the attacker to cause a denial of service (DoS) condition where no new incoming encrypted connections are accepted. The device must be reloaded to clear this condition.
Note: These incoming TLS 1.3 connections include both data traffic and user-management traffic. After the device is in the vulnerable state, no new encrypted connections can be accepted. |
| A vulnerability in the TCP syslog module of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to exhaust the 1550-byte buffers on an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to a missing boundary check in an internal function. An attacker could exploit this vulnerability by establishing a man-in-the-middle position between an affected device and its configured TCP syslog server and then maliciously modifying the TCP header in segments that are sent from the syslog server to the affected device. A successful exploit could allow the attacker to exhaust buffer on the affected device and cause all TCP-based features to stop functioning, resulting in a DoS condition. The affected TCP-based features include AnyConnect SSL VPN, clientless SSL VPN, and management connections such as Secure Shell (SSH), Telnet, and HTTPS. |
| A vulnerability in the processing of SSH connections of Cisco Firepower Management Center (FMC) and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper error handling when an SSH session fails to be established. An attacker could exploit this vulnerability by sending a high rate of crafted SSH connections to the instance. A successful exploit could allow the attacker to cause resource exhaustion, resulting in a reboot on the affected device. |
| A vulnerability in the internal packet-processing functionality of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series Security Appliances could allow an unauthenticated, remote attacker to cause an affected device to stop processing traffic, resulting in a denial of service (DoS) condition. The vulnerability is due to the affected software improperly validating IP Version 4 (IPv4) and IP Version 6 (IPv6) packets after the software reassembles the packets (following IP Fragmentation). An attacker could exploit this vulnerability by sending a series of malicious, fragmented IPv4 or IPv6 packets to an affected device. A successful exploit could allow the attacker to cause Snort processes on the affected device to hang at 100% CPU utilization, which could cause the device to stop processing traffic and result in a DoS condition until the device is reloaded manually. This vulnerability affects Cisco Firepower Threat Defense (FTD) Software Releases 6.2.1 and 6.2.2, if the software is running on a Cisco Firepower 2100 Series Security Appliance. Cisco Bug IDs: CSCvf91098. |
| Multiple vulnerabilities in the Media Gateway Control Protocol (MGCP) inspection feature of Cisco Adaptive Security Appliance (ASA) Software and Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerabilities are due to inefficient memory management. An attacker could exploit these vulnerabilities by sending crafted MGCP packets through an affected device. An exploit could allow the attacker to cause memory exhaustion resulting in a restart of an affected device, causing a DoS condition for traffic traversing the device. |
| A vulnerability in the AnyConnect SSL VPN feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to an implementation error within the SSL/TLS session handling process that can prevent the release of a session handler under specific conditions. An attacker could exploit this vulnerability by sending crafted SSL/TLS traffic to an affected device, increasing the probability of session handler leaks. A successful exploit could allow the attacker to eventually deplete the available session handler pool, preventing new sessions from being established and causing a DoS condition. |
| A vulnerability in the packet processing functionality of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to inefficient memory management. An attacker could exploit this vulnerability by sending a high rate of IPv4 or IPv6 traffic through an affected device. This traffic would need to match a configured block action in an access control policy. An exploit could allow the attacker to cause a memory exhaustion condition on the affected device, which would result in a DoS for traffic transiting the device, as well as sluggish performance of the management interface. Once the flood is stopped, performance should return to previous states. |
| A vulnerability in the logging configuration of Secure Sockets Layer (SSL) policies for Cisco FirePOWER System Software 5.3.0 through 6.2.2 could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition due to high consumption of system resources. The vulnerability is due to the logging of certain TCP packets by the affected software. An attacker could exploit this vulnerability by sending a flood of crafted TCP packets to an affected device. A successful exploit could allow the attacker to cause a DoS condition. The success of an exploit is dependent on how an administrator has configured logging for SSL policies for a device. This vulnerability affects Cisco FirePOWER System Software that is configured to log connections by using SSL policy default actions. Cisco Bug IDs: CSCvd07072. |
| Mastodon is a free, open-source social network server based on ActivityPub. Prior to 4.4.21, 4.5.14, 4.6.4, and 4.7.0-beta.1, the administrative statistics endpoints handled by Api::V1::Admin::MeasuresController and Api::V1::Admin::RetentionController checked authorization only after beginning expensive calculations. Anonymous callers could submit keys, start_at, and end_at parameters that caused long-running SQL queries in Admin::Metrics::Measure, Admin::Metrics::Retention, and Admin::Metrics::Dimension::BaseDimension, allowing repeated requests to exhaust server resources. This issue is fixed in versions 4.4.21, 4.5.14, 4.6.4, and 4.7.0-beta.1. |
| Inefficient Algorithmic Complexity vulnerability in the traversal engine in rrrene html_sanitize_ex allows an unauthenticated remote attacker to exhaust server CPU and memory via a flat run of sibling elements in sanitized HTML. The list clause of HtmlSanitizeEx.Traverser.traverse/2 recurses on the tail of a sibling list and then evaluates List.flatten([head] ++ tail) over the already flattened result, so every one of n siblings copies and re-walks the entire remaining tail. The flattening is only needed for the rare case where scrub returns several replacement nodes for one node, but the cost is paid across the whole tail at every step, making traversal quadratic in sibling count.
The traverser sits on every public entry point, so no particular scrubber or configuration is required and the payload needs only allowed tags. A 160 KB body of 20,000 sibling elements occupies a scheduler for roughly 1.7 seconds, and the cost grows faster than the body does.
This issue affects html_sanitize_ex: from 0.3.1 before 1.5.3. |
| Vulnerability in Wikimedia Foundation Scribunto.
This issue affects Scribunto: from 1.45.0 before 1.45.2. |
| gopacket provides packet processing capabilities for Go. Through version 1.7.0, multiple layer decoders use attacker-controlled lengths, counts, or offsets before validating them against packet buffers, allowing a crafted packet decoded through DecodingLayerParser or DecodeFromBytes to trigger an unrecovered panic and remotely deny service. A patch commit is available at 210f25f. |
| Klever-Go is the Go implementation of the Klever blockchain protocol. Versions from 1.7.14 through 1.7.17 are vulnerable to a remotely triggerable denial of service. Both REST APIs are started with the Gin Engine.Run convenience method, which serves requests through Go's default HTTP server with no ReadHeaderTimeout, ReadTimeout, or MaxHeaderBytes configured. As a result, incoming connections that never complete their request headers are held open indefinitely. When a REST listener is reachable beyond localhost through the documented all-interface bind or a Docker port-publish deployment, a single unauthenticated client can open many slow-header connections and hold them open until server file descriptors are exhausted, preventing the API from accepting new connections. This renders the REST API unavailable to legitimate clients. This issue is fixed in version 1.7.18. |
| JupyterHub is software that allows users to create a multi-user server for Jupyter notebooks. Prior to 5.5.0, invalid input to form-based login authenticators can place an unbounded attacker-controlled username in failed-login logs, allowing an unauthenticated attacker to consume logging and storage resources. This issue is fixed in version 5.5.0. |
| The incremental HTML parser (html.parser.HTMLParser) allows for CPU
denial-of-service through repeated unterminated markup declarations when
processing uncontrolled data. |
| unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining characters
with alternating Canonical Combining Class values.
This affects all normalization forms. |
| `Element.findall()` and fully-consumed `Element.iterfind()` exhibit `O(n^2)` time complexity when using XPath index predicates (e.g. `[1]`, `[last()]`, `[last()-N]`) on XML documents with many same-tag siblings. `Element.find()` is only affected when the first match is near the end of the sibling list, such as with `[last()]` or `[last()-N]`; `.//item[1]` short-circuits after the first match. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-eth: put MAC endpoint device on disconnect
fsl_mc_get_endpoint() returns the MAC endpoint device with a reference
taken through device_find_child(). The Ethernet connect path stores that
device in mac->mc_dev and keeps it for the lifetime of the connected MAC
object.
However, the disconnect path only disconnects and closes the MAC before
freeing the dpaa2_mac object. It does not drop the endpoint device
reference stored in mac->mc_dev, so every successful connect leaks that
device reference when the MAC is later disconnected.
Drop the endpoint device reference after closing the MAC and before
freeing the dpaa2_mac object. |
