| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/kasan: Fix early region not updated correctly
The shadow's page table is not updated when PTE_RPN_SHIFT is 24
and PAGE_SHIFT is 12. It not only causes false positives but
also false negative as shown the following text.
Fix it by bringing the logic of kasan_early_shadow_page_entry here.
1. False Positive:
==================================================================
BUG: KASAN: vmalloc-out-of-bounds in pcpu_alloc+0x508/0xa50
Write of size 16 at addr f57f3be0 by task swapper/0/1
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.15.0-12267-gdebe436e77c7 #1
Call Trace:
[c80d1c20] [c07fe7b8] dump_stack_lvl+0x4c/0x6c (unreliable)
[c80d1c40] [c02ff668] print_address_description.constprop.0+0x88/0x300
[c80d1c70] [c02ff45c] kasan_report+0x1ec/0x200
[c80d1cb0] [c0300b20] kasan_check_range+0x160/0x2f0
[c80d1cc0] [c03018a4] memset+0x34/0x90
[c80d1ce0] [c0280108] pcpu_alloc+0x508/0xa50
[c80d1d40] [c02fd7bc] __kmem_cache_create+0xfc/0x570
[c80d1d70] [c0283d64] kmem_cache_create_usercopy+0x274/0x3e0
[c80d1db0] [c2036580] init_sd+0xc4/0x1d0
[c80d1de0] [c00044a0] do_one_initcall+0xc0/0x33c
[c80d1eb0] [c2001624] kernel_init_freeable+0x2c8/0x384
[c80d1ef0] [c0004b14] kernel_init+0x24/0x170
[c80d1f10] [c001b26c] ret_from_kernel_thread+0x5c/0x64
Memory state around the buggy address:
f57f3a80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3b00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
>f57f3b80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
^
f57f3c00: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
f57f3c80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8
==================================================================
2. False Negative (with KASAN tests):
==================================================================
Before fix:
ok 45 - kmalloc_double_kzfree
# vmalloc_oob: EXPECTATION FAILED at lib/test_kasan.c:1039
KASAN failure expected in "((volatile char *)area)[3100]", but none occurred
not ok 46 - vmalloc_oob
not ok 1 - kasan
==================================================================
After fix:
ok 1 - kasan |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix deadlock in concurrent rename whiteout and inode writeback
Following hung tasks:
[ 77.028764] task:kworker/u8:4 state:D stack: 0 pid: 132
[ 77.028820] Call Trace:
[ 77.029027] schedule+0x8c/0x1b0
[ 77.029067] mutex_lock+0x50/0x60
[ 77.029074] ubifs_write_inode+0x68/0x1f0 [ubifs]
[ 77.029117] __writeback_single_inode+0x43c/0x570
[ 77.029128] writeback_sb_inodes+0x259/0x740
[ 77.029148] wb_writeback+0x107/0x4d0
[ 77.029163] wb_workfn+0x162/0x7b0
[ 92.390442] task:aa state:D stack: 0 pid: 1506
[ 92.390448] Call Trace:
[ 92.390458] schedule+0x8c/0x1b0
[ 92.390461] wb_wait_for_completion+0x82/0xd0
[ 92.390469] __writeback_inodes_sb_nr+0xb2/0x110
[ 92.390472] writeback_inodes_sb_nr+0x14/0x20
[ 92.390476] ubifs_budget_space+0x705/0xdd0 [ubifs]
[ 92.390503] do_rename.cold+0x7f/0x187 [ubifs]
[ 92.390549] ubifs_rename+0x8b/0x180 [ubifs]
[ 92.390571] vfs_rename+0xdb2/0x1170
[ 92.390580] do_renameat2+0x554/0x770
, are caused by concurrent rename whiteout and inode writeback processes:
rename_whiteout(Thread 1) wb_workfn(Thread2)
ubifs_rename
do_rename
lock_4_inodes (Hold ui_mutex)
ubifs_budget_space
make_free_space
shrink_liability
__writeback_inodes_sb_nr
bdi_split_work_to_wbs (Queue new wb work)
wb_do_writeback(wb work)
__writeback_single_inode
ubifs_write_inode
LOCK(ui_mutex)
↑
wb_wait_for_completion (Wait wb work) <-- deadlock!
Reproducer (Detail program in [Link]):
1. SYS_renameat2("/mp/dir/file", "/mp/dir/whiteout", RENAME_WHITEOUT)
2. Consume out of space before kernel(mdelay) doing budget for whiteout
Fix it by doing whiteout space budget before locking ubifs inodes.
BTW, it also fixes wrong goto tag 'out_release' in whiteout budget
error handling path(It should at least recover dir i_size and unlock
4 ubifs inodes). |
| In the Linux kernel, the following vulnerability has been resolved:
ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link]. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: davinci: da850-evm: Avoid NULL pointer dereference
With newer versions of GCC, there is a panic in da850_evm_config_emac()
when booting multi_v5_defconfig in QEMU under the palmetto-bmc machine:
Unable to handle kernel NULL pointer dereference at virtual address 00000020
pgd = (ptrval)
[00000020] *pgd=00000000
Internal error: Oops: 5 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0 #1
Hardware name: Generic DT based system
PC is at da850_evm_config_emac+0x1c/0x120
LR is at do_one_initcall+0x50/0x1e0
The emac_pdata pointer in soc_info is NULL because davinci_soc_info only
gets populated on davinci machines but da850_evm_config_emac() is called
on all machines via device_initcall().
Move the rmii_en assignment below the machine check so that it is only
dereferenced when running on a supported SoC. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: dts: bcm2711: Fix xHCI power-domain
During s2idle tests on the Raspberry CM4 the VPU firmware always crashes
on xHCI power-domain resume:
root@raspberrypi:/sys/power# echo freeze > state
[ 70.724347] xhci_suspend finished
[ 70.727730] xhci_plat_suspend finished
[ 70.755624] bcm2835-power bcm2835-power: Power grafx off
[ 70.761127] USB: Set power to 0
[ 74.653040] USB: Failed to set power to 1 (-110)
This seems to be caused because of the mixed usage of
raspberrypi-power and bcm2835-power at the same time. So avoid
the usage of the VPU firmware power-domain driver, which
prevents the VPU crash. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sched: Fix fence reference count leak
The last_scheduled fence leaks when an entity is being killed and adding
the cleanup callback fails.
Decrement the reference count of prev when dma_fence_add_callback()
fails, ensuring proper balance.
[phasta: add git tag info for stable kernel] |
| In the Linux kernel, the following vulnerability has been resolved:
dm-flakey: Fix memory corruption in optional corrupt_bio_byte feature
Fix memory corruption due to incorrect parameter being passed to bio_init |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_rbtree: skip end interval element from gc
rbtree lazy gc on insert might collect an end interval element that has
been just added in this transactions, skip end interval elements that
are not yet active. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix adapter NULL pointer dereference on reboot
With SRIOV enabled, idpf ends up calling into idpf_remove() twice.
First via idpf_shutdown() and then again when idpf_remove() calls into
sriov_disable(), because the VF devices use the idpf driver, hence the
same remove routine. When that happens, it is possible for the adapter
to be NULL from the first call to idpf_remove(), leading to a NULL
pointer dereference.
echo 1 > /sys/class/net/<netif>/device/sriov_numvfs
reboot
BUG: kernel NULL pointer dereference, address: 0000000000000020
...
RIP: 0010:idpf_remove+0x22/0x1f0 [idpf]
...
? idpf_remove+0x22/0x1f0 [idpf]
? idpf_remove+0x1e4/0x1f0 [idpf]
pci_device_remove+0x3f/0xb0
device_release_driver_internal+0x19f/0x200
pci_stop_bus_device+0x6d/0x90
pci_stop_and_remove_bus_device+0x12/0x20
pci_iov_remove_virtfn+0xbe/0x120
sriov_disable+0x34/0xe0
idpf_sriov_configure+0x58/0x140 [idpf]
idpf_remove+0x1b9/0x1f0 [idpf]
idpf_shutdown+0x12/0x30 [idpf]
pci_device_shutdown+0x35/0x60
device_shutdown+0x156/0x200
...
Replace the direct idpf_remove() call in idpf_shutdown() with
idpf_vc_core_deinit() and idpf_deinit_dflt_mbx(), which perform
the bulk of the cleanup, such as stopping the init task, freeing IRQs,
destroying the vports and freeing the mailbox. This avoids the calls to
sriov_disable() in addition to a small netdev cleanup, and destroying
workqueues, which don't seem to be required on shutdown. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/huge_memory: drop beyond-EOF folios with the right number of refs
When an after-split folio is large and needs to be dropped due to EOF,
folio_put_refs(folio, folio_nr_pages(folio)) should be used to drop all
page cache refs. Otherwise, the folio will not be freed, causing memory
leak.
This leak would happen on a filesystem with blocksize > page_size and a
truncate is performed, where the blocksize makes folios split to >0 order
ones, causing truncated folios not being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: NULL-check BO's backing store when determining GFX12 PTE flags
PRT BOs may not have any backing store, so bo->tbo.resource will be
NULL. Check for that before dereferencing.
(cherry picked from commit 3e3fcd29b505cebed659311337ea03b7698767fc) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix missing .is_two_pixels_per_container
Starting from 6.11, AMDGPU driver, while being loaded with amdgpu.dc=1,
due to lack of .is_two_pixels_per_container function in dce60_tg_funcs,
causes a NULL pointer dereference on PCs with old GPUs, such as R9 280X.
So this fix adds missing .is_two_pixels_per_container to dce60_tg_funcs.
(cherry picked from commit bd4b125eb949785c6f8a53b0494e32795421209d) |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: nuvoton: npcm8xx: Add NULL check in npcm8xx_gpio_fw
devm_kasprintf() calls can return null pointers on failure.
But the return values were not checked in npcm8xx_gpio_fw().
Add NULL check in npcm8xx_gpio_fw(), to handle kernel NULL
pointer dereference error. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: cleanup mana struct after debugfs_remove()
When on a MANA VM hibernation is triggered, as part of hibernate_snapshot(),
mana_gd_suspend() and mana_gd_resume() are called. If during this
mana_gd_resume(), a failure occurs with HWC creation, mana_port_debugfs
pointer does not get reinitialized and ends up pointing to older,
cleaned-up dentry.
Further in the hibernation path, as part of power_down(), mana_gd_shutdown()
is triggered. This call, unaware of the failures in resume, tries to cleanup
the already cleaned up mana_port_debugfs value and hits the following bug:
[ 191.359296] mana 7870:00:00.0: Shutdown was called
[ 191.359918] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ 191.360584] #PF: supervisor write access in kernel mode
[ 191.361125] #PF: error_code(0x0002) - not-present page
[ 191.361727] PGD 1080ea067 P4D 0
[ 191.362172] Oops: Oops: 0002 [#1] SMP NOPTI
[ 191.362606] CPU: 11 UID: 0 PID: 1674 Comm: bash Not tainted 6.14.0-rc5+ #2
[ 191.363292] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 11/21/2024
[ 191.364124] RIP: 0010:down_write+0x19/0x50
[ 191.364537] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 53 48 89 fb e8 de cd ff ff 31 c0 ba 01 00 00 00 <f0> 48 0f b1 13 75 16 65 48 8b 05 88 24 4c 6a 48 89 43 08 48 8b 5d
[ 191.365867] RSP: 0000:ff45fbe0c1c037b8 EFLAGS: 00010246
[ 191.366350] RAX: 0000000000000000 RBX: 0000000000000098 RCX: ffffff8100000000
[ 191.366951] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098
[ 191.367600] RBP: ff45fbe0c1c037c0 R08: 0000000000000000 R09: 0000000000000001
[ 191.368225] R10: ff45fbe0d2b01000 R11: 0000000000000008 R12: 0000000000000000
[ 191.368874] R13: 000000000000000b R14: ff43dc27509d67c0 R15: 0000000000000020
[ 191.369549] FS: 00007dbc5001e740(0000) GS:ff43dc663f380000(0000) knlGS:0000000000000000
[ 191.370213] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 191.370830] CR2: 0000000000000098 CR3: 0000000168e8e002 CR4: 0000000000b73ef0
[ 191.371557] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 191.372192] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400
[ 191.372906] Call Trace:
[ 191.373262] <TASK>
[ 191.373621] ? show_regs+0x64/0x70
[ 191.374040] ? __die+0x24/0x70
[ 191.374468] ? page_fault_oops+0x290/0x5b0
[ 191.374875] ? do_user_addr_fault+0x448/0x800
[ 191.375357] ? exc_page_fault+0x7a/0x160
[ 191.375971] ? asm_exc_page_fault+0x27/0x30
[ 191.376416] ? down_write+0x19/0x50
[ 191.376832] ? down_write+0x12/0x50
[ 191.377232] simple_recursive_removal+0x4a/0x2a0
[ 191.377679] ? __pfx_remove_one+0x10/0x10
[ 191.378088] debugfs_remove+0x44/0x70
[ 191.378530] mana_detach+0x17c/0x4f0
[ 191.378950] ? __flush_work+0x1e2/0x3b0
[ 191.379362] ? __cond_resched+0x1a/0x50
[ 191.379787] mana_remove+0xf2/0x1a0
[ 191.380193] mana_gd_shutdown+0x3b/0x70
[ 191.380642] pci_device_shutdown+0x3a/0x80
[ 191.381063] device_shutdown+0x13e/0x230
[ 191.381480] kernel_power_off+0x35/0x80
[ 191.381890] hibernate+0x3c6/0x470
[ 191.382312] state_store+0xcb/0xd0
[ 191.382734] kobj_attr_store+0x12/0x30
[ 191.383211] sysfs_kf_write+0x3e/0x50
[ 191.383640] kernfs_fop_write_iter+0x140/0x1d0
[ 191.384106] vfs_write+0x271/0x440
[ 191.384521] ksys_write+0x72/0xf0
[ 191.384924] __x64_sys_write+0x19/0x20
[ 191.385313] x64_sys_call+0x2b0/0x20b0
[ 191.385736] do_syscall_64+0x79/0x150
[ 191.386146] ? __mod_memcg_lruvec_state+0xe7/0x240
[ 191.386676] ? __lruvec_stat_mod_folio+0x79/0xb0
[ 191.387124] ? __pfx_lru_add+0x10/0x10
[ 191.387515] ? queued_spin_unlock+0x9/0x10
[ 191.387937] ? do_anonymous_page+0x33c/0xa00
[ 191.388374] ? __handle_mm_fault+0xcf3/0x1210
[ 191.388805] ? __count_memcg_events+0xbe/0x180
[ 191.389235] ? handle_mm_fault+0xae/0x300
[ 19
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: entry: fix ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
Currently the ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround isn't
quite right, as it is supposed to be applied after the last explicit
memory access, but is immediately followed by an LDR.
The ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD workaround is used to
handle Cortex-A520 erratum 2966298 and Cortex-A510 erratum 3117295,
which are described in:
* https://developer.arm.com/documentation/SDEN2444153/0600/?lang=en
* https://developer.arm.com/documentation/SDEN1873361/1600/?lang=en
In both cases the workaround is described as:
| If pagetable isolation is disabled, the context switch logic in the
| kernel can be updated to execute the following sequence on affected
| cores before exiting to EL0, and after all explicit memory accesses:
|
| 1. A non-shareable TLBI to any context and/or address, including
| unused contexts or addresses, such as a `TLBI VALE1 Xzr`.
|
| 2. A DSB NSH to guarantee completion of the TLBI.
The important part being that the TLBI+DSB must be placed "after all
explicit memory accesses".
Unfortunately, as-implemented, the TLBI+DSB is immediately followed by
an LDR, as we have:
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| alternative_if_not ARM64_UNMAP_KERNEL_AT_EL0
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
| eret
| alternative_else_nop_endif
|
| [ ... KPTI exception return path ... ]
This patch fixes this by reworking the logic to place the TLBI+DSB
immediately before the ERET, after all explicit memory accesses.
The ERET is currently in a separate alternative block, and alternatives
cannot be nested. To account for this, the alternative block for
ARM64_UNMAP_KERNEL_AT_EL0 is replaced with a single alternative branch
to skip the KPTI logic, with the new shape of the logic being:
| alternative_insn "b .L_skip_tramp_exit_\@", nop, ARM64_UNMAP_KERNEL_AT_EL0
| [ ... KPTI exception return path ... ]
| .L_skip_tramp_exit_\@:
|
| ldr lr, [sp, #S_LR]
| add sp, sp, #PT_REGS_SIZE // restore sp
|
| alternative_if ARM64_WORKAROUND_SPECULATIVE_UNPRIV_LOAD
| tlbi vale1, xzr
| dsb nsh
| alternative_else_nop_endif
| eret
The new structure means that the workaround is only applied when KPTI is
not in use; this is fine as noted in the documented implications of the
erratum:
| Pagetable isolation between EL0 and higher level ELs prevents the
| issue from occurring.
... and as per the workaround description quoted above, the workaround
is only necessary "If pagetable isolation is disabled". |
| In the Linux kernel, the following vulnerability has been resolved:
net: enetc: avoid deadlock in enetc_tx_onestep_tstamp()
This lockdep splat says it better than I could:
================================
WARNING: inconsistent lock state
6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0
{IN-SOFTIRQ-W} state was registered at:
_raw_spin_lock+0x5c/0xc0
sch_direct_xmit+0x148/0x37c
__dev_queue_xmit+0x528/0x111c
ip6_finish_output2+0x5ec/0xb7c
ip6_finish_output+0x240/0x3f0
ip6_output+0x78/0x360
ndisc_send_skb+0x33c/0x85c
ndisc_send_rs+0x54/0x12c
addrconf_rs_timer+0x154/0x260
call_timer_fn+0xb8/0x3a0
__run_timers.part.0+0x214/0x26c
run_timer_softirq+0x3c/0x74
__do_softirq+0x14c/0x5d8
____do_softirq+0x10/0x20
call_on_irq_stack+0x2c/0x5c
do_softirq_own_stack+0x1c/0x30
__irq_exit_rcu+0x168/0x1a0
irq_exit_rcu+0x10/0x40
el1_interrupt+0x38/0x64
irq event stamp: 7825
hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130
hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8
softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8
softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(_xmit_ETHER#2);
<Interrupt>
lock(_xmit_ETHER#2);
*** DEADLOCK ***
3 locks held by kworker/1:3/179:
#0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0
#2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34
Workqueue: events enetc_tx_onestep_tstamp
Call trace:
print_usage_bug.part.0+0x208/0x22c
mark_lock+0x7f0/0x8b0
__lock_acquire+0x7c4/0x1ce0
lock_acquire.part.0+0xe0/0x220
lock_acquire+0x68/0x84
_raw_spin_lock+0x5c/0xc0
netif_freeze_queues+0x5c/0xc0
netif_tx_lock+0x24/0x34
enetc_tx_onestep_tstamp+0x20/0x100
process_one_work+0x28c/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x11c
but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in
process context, therefore with softirqs enabled (i.o.w., it can be
interrupted by a softirq). If we hold the netif_tx_lock() when there is
an interrupt, and the NET_TX softirq then gets scheduled, this will take
the netif_tx_lock() a second time and deadlock the kernel.
To solve this, use netif_tx_lock_bh(), which blocks softirqs from
running. |
| In the Linux kernel, the following vulnerability has been resolved:
l2tp: close all race conditions in l2tp_tunnel_register()
The code in l2tp_tunnel_register() is racy in several ways:
1. It modifies the tunnel socket _after_ publishing it.
2. It calls setup_udp_tunnel_sock() on an existing socket without
locking.
3. It changes sock lock class on fly, which triggers many syzbot
reports.
This patch amends all of them by moving socket initialization code
before publishing and under sock lock. As suggested by Jakub, the
l2tp lockdep class is not necessary as we can just switch to
bh_lock_sock_nested(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix memory leaks
When hci_cmd_sync_queue() failed in hci_le_terminate_big() or
hci_le_big_terminate(), the memory pointed by variable d is not freed,
which will cause memory leak. Add release process to error path. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix memory leak in hci_update_adv_data()
When hci_cmd_sync_queue() failed in hci_update_adv_data(), inst_ptr is
not freed, which will cause memory leak, convert to use ERR_PTR/PTR_ERR
to pass the instance to callback so no memory needs to be allocated. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Fix possible deadlock in rfcomm_sk_state_change
syzbot reports a possible deadlock in rfcomm_sk_state_change [1].
While rfcomm_sock_connect acquires the sk lock and waits for
the rfcomm lock, rfcomm_sock_release could have the rfcomm
lock and hit a deadlock for acquiring the sk lock.
Here's a simplified flow:
rfcomm_sock_connect:
lock_sock(sk)
rfcomm_dlc_open:
rfcomm_lock()
rfcomm_sock_release:
rfcomm_sock_shutdown:
rfcomm_lock()
__rfcomm_dlc_close:
rfcomm_k_state_change:
lock_sock(sk)
This patch drops the sk lock before calling rfcomm_dlc_open to
avoid the possible deadlock and holds sk's reference count to
prevent use-after-free after rfcomm_dlc_open completes. |
