| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Podman is a tool for managing OCI containers and pods. From 1.8.1 until 5.8.4, a container image that contains a environment variable with just a key and no value can trick podman into passing that variable from the host into the container. This is made worse by the fact that using an asterisk (*) will cause podman to pass all host variables into the container. So essentially a malicious image can exfiltrate all podman environment variables that are set in the session from where the container is launched. This vulnerability is fixed in 5.8.4 and 6.0.0. |
| Podman is a tool for managing OCI containers and pods. From 3.0.0 until 5.7.1, running a malicious container image where the WORKDIR path contains a symlink can create a directory or modify ownership on the host filesystem. Modified ownership is less likely to happen as that requires help from an untrusted/malicious process that mutates the host filesystem tree during dereferencing of the WORKDIR path, to trigger a race condition. This vulnerability is fixed in 5.7.1. |
| Unauthenticated Insecure Direct Object References (IDOR) in Payment Gateway Based Fees and Discounts for WooCommerce <= 3.0.0 versions. |
| Unauthenticated Insecure Direct Object References (IDOR) in Blocksy Companion Pro <= 2.1.46 versions. |
| LibrePhotos before 1.0.0 contains a broken object level authorization vulnerability in the SetPhotosShared endpoint that allows authenticated users to grant themselves access to other users' private photos by bypassing ownership validation. Attackers can manipulate shared_to relations without proper owner checks to read arbitrary private photos belonging to other users. |
| The Paid Membership Plugin, Ecommerce, User Registration Form, Login Form, User Profile & Restrict Content WordPress plugin before 4.16.17 does not verify that the user performing a subscription action owns the targeted subscription, allowing any authenticated user (Subscriber+) to cancel other users' active subscriptions via an Insecure Direct Object Reference. |
| The SignUp & SignIn plugin for WordPress is vulnerable to Authentication Bypass via Weak Password Reset Validation leading to Account Takeover in versions up to, and including, 1.0.0. This is due to the `pravel_change_password()` AJAX handler — registered via `wp_ajax_nopriv_pravel_change_password` and therefore accessible to unauthenticated users — performing no nonce verification, no capability check, and only a loose equality check between an attacker-supplied `reset_activation_code` POST parameter and the target user's `forgot_email` user meta value; when a user has never initiated a password reset, `get_user_meta()` returns an empty string that trivially satisfies this check against an omitted or empty attacker-supplied code. This makes it possible for unauthenticated attackers to change the password of any WordPress user, including administrators, by sending a crafted POST request to `admin-ajax.php` with `action=pravel_change_password`, `reset_user_id` set to the target account's user ID, and `new_password_custom` set to an attacker-chosen password. Successful exploitation allows the attacker to authenticate with the newly set password and fully take over the targeted account, achieving administrator-level privilege escalation on the affected site. |
| The Dokan: AI Powered WooCommerce Multivendor Marketplace Solution – Build Your Own Amazon, eBay, Etsy plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.0.4 via the 'id' parameter due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with subscriber-level access and above, to read any other vendor's products — including unpublished draft and pending listings — exposing product names, prices, SKUs, and descriptions belonging to other vendors. The permission callbacks for both the collection endpoint and the single-item endpoint only verify the generic vendor capability ('dokan_view_product_menu' / 'dokandar'), which every vendor holds, rather than confirming the requested author ID or product ownership matches the authenticated user. |
| A flaw was found in Keycloak's client registration service. A remote attacker, possessing a previously issued Registration Access Token (RAT), could exploit this vulnerability to re-enable a client that an administrator had explicitly disabled. This bypasses security controls, allowing the attacker to reset the client's secret and potentially regain privileged API access. The primary impact includes unauthorized information disclosure and potential integrity compromise. |
| Unauthenticated Insecure Direct Object References (IDOR) in License Manager for WooCommerce <= 3.0.15 versions. |
| Subscriber Insecure Direct Object References (IDOR) in SupportCandy <= 3.4.6 versions. |
| OpenProject is open-source, web-based project management software. Prior to 17.3.3 and 17.4.1, a cross-project IDOR / authorization context confusion in the Calendar and Team Planner modules allows a user with management permissions in one project to delete public Calendar or Team Planner Queries from another project where they do not have the corresponding management permissions. Both modules authorize the request against the project identified by :project_id in the URL, but the actual Query object is loaded later by :id from Query.visible(current_user) without verifying that the loaded Query belongs to the authorized project. As a result, an attacker can use permissions from Project A to delete shared/public Calendar or Team Planner views from Project B, causing integrity impact and limited availability impact for users relying on those shared views. This vulnerability is fixed in 17.3.3 and 17.4.1. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: Reserve an extra page for early kernel mapping
The final part of [data, end) segment may overflow into the next page of
init_pg_end[1] which is the gap page before early_init_stack[2]:
[1]
crash_arm64_v9.0.1> vtop ffffffed00601000
VIRTUAL PHYSICAL
ffffffed00601000 83401000
PAGE DIRECTORY: ffffffecffd62000
PGD: ffffffecffd62da0 => 10000000833fb003
PMD: ffffff80033fb018 => 10000000833fe003
PTE: ffffff80033fe008 => 68000083401f03
PAGE: 83401000
PTE PHYSICAL FLAGS
68000083401f03 83401000 (VALID|SHARED|AF|NG|PXN|UXN)
PAGE PHYSICAL MAPPING INDEX CNT FLAGS
fffffffec00d0040 83401000 0 0 1 4000 reserved
[2]
ffffffed002c8000 (r) __pi__data
ffffffed0054e000 (d) __pi___bss_start
ffffffed005f5000 (b) __pi_init_pg_dir
ffffffed005fe000 (b) __pi_init_pg_end
ffffffed005ff000 (B) early_init_stack
ffffffed00608000 (b) __pi__end
For 4K pages, the early kernel mapping may use 2MB block entries but the
kernel segments are only 64KB aligned. Segment boundaries that fall
within a 2MB block therefore require a PTE table so that different
attributes can be applied on either side of the boundary.
KERNEL_SEGMENT_COUNT still correctly counts the five permanent kernel
VMAs registered by declare_kernel_vmas(). However, since commit
5973a62efa34 ("arm64: map [_text, _stext) virtual address range
non-executable+read-only"), the early mapper also maps [_text, _stext)
separately from [_stext, _etext). This adds one more early-only split
and can require one more page-table page than the existing
EARLY_SEGMENT_EXTRA_PAGES allowance reserves.
Increase the 4K-page early mapping allowance by one page to cover that
additional split.
[[email protected]: rewrote part of the commit log]
[[email protected]: expanded the code comment] |
| In the Linux kernel, the following vulnerability has been resolved:
net: phonet: do not BUG_ON() in pn_socket_autobind() on failed bind
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sg: Resolve soft lockup issue when opening /dev/sgX
The parameter def_reserved_size defines the default buffer size reserved
for each Sg_fd and should be restricted to a range between 0 and 1,048,576
(see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the
function sg_proc_write_dressz enforces this limit, it is possible to bypass
it by directly modifying the module parameter as shown below, which then
causes a soft lockup:
echo -1 > /sys/module/sg/parameters/def_reserved_size
exec 4<> /dev/sg0
watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537]
Modules loaded:
CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134,
PREEMPT disabled
Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version
1.16.1-2.fc37 dated 04/01/2014
...
Call Trace:
sg_build_reserve+0x5c/0xa0
sg_add_sfp+0x168/0x270
sg_open+0x16e/0x340
chrdev_open+0xbe/0x230
do_dentry_open+0x175/0x480
vfs_open+0x34/0xf0
do_open+0x265/0x3d0
path_openat+0x110/0x290
do_filp_open+0xc3/0x170
do_sys_openat2+0x71/0xe0
__x64_sys_openat+0x6d/0xa0
do_syscall_64+0x62/0x310
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The fix is to use module_param_cb to validate and reject invalid values
assigned to def_reserved_size. |
| In the Linux kernel, the following vulnerability has been resolved:
blk-wbt: remove WARN_ON_ONCE from wbt_init_enable_default()
wbt_init_enable_default() uses WARN_ON_ONCE to check for failures from
wbt_alloc() and wbt_init(). However, both are expected failure paths:
- wbt_alloc() can return NULL under memory pressure (-ENOMEM)
- wbt_init() can fail with -EBUSY if wbt is already registered
syzbot triggers this by injecting memory allocation failures during MTD
partition creation via ioctl(BLKPG), causing a spurious warning.
wbt_init_enable_default() is a best-effort initialization called from
blk_register_queue() with a void return type. Failure simply means the
disk operates without writeback throttling, which is harmless.
Replace WARN_ON_ONCE with plain if-checks, consistent with how
wbt_set_lat() in the same file already handles these failures. Add a
pr_warn() for the wbt_init() failure to retain diagnostic information
without triggering a full stack trace. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: remove redundant netdev_lock_ops() from conduit ethtool ops
DSA replaces the conduit (master) device's ethtool_ops with its own
wrappers that aggregate stats from both the conduit and DSA switch
ports. Taking the lock again inside the DSA wrappers causes a deadlock.
Stumbled upon this when booting qemu with fbnic and CONFIG_NET_DSA_LOOP=y
(which looks like some kind of testing device that auto-populates the ports
of eth0). `ethtool -i` is enough to deadlock. This means we have basically zero
coverage for DSA stuff with real ops locked devs.
Remove the redundant netdev_lock_ops()/netdev_unlock_ops() calls from
the DSA conduit ethtool wrappers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| A vulnerability was detected in CherryHQ cherry-studio up to 1.9.7. This affects the function sha256 of the file src/main/services/memory/MemoryService.ts of the component CherryIN Preload API. Performing a manipulation of the argument state results in authorization bypass. The attack can be initiated remotely. The attack's complexity is rated as high. It is indicated that the exploitability is difficult. The exploit is now public and may be used. The vendor explains, that "[m]emory is planned to be removed in v2 version." |
| OpenProject is open-source, web-based project management software. Prior to 17.3.2 and 17.4.0, the web application's meetings filter feature leaks whether a given user ID corresponds to a valid account and discloses the user's full name, allowing an attacker to enumerate all existing user accounts by probing user IDs and observing differences in the server response. This vulnerability is fixed in 17.3.2 and 17.4.0. |
