| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SMP: derive legacy responder STK authentication from MITM state
The legacy responder path in smp_random() currently labels the stored
STK as authenticated whenever pending_sec_level is BT_SECURITY_HIGH.
That reflects what the local service requested, not what the pairing
flow actually achieved.
For Just Works/Confirm legacy pairing, SMP_FLAG_MITM_AUTH stays clear
and the resulting STK should remain unauthenticated even if the local
side requested HIGH security. Use the established MITM state when
storing the responder STK so the key metadata matches the pairing result.
This also keeps the legacy path aligned with the Secure Connections code,
which already treats JUST_WORKS/JUST_CFM as unauthenticated. |
| In the Linux kernel, the following vulnerability has been resolved:
block: avoid to reuse `hctx` not removed from cpuhp callback list
If the 'hctx' isn't removed from cpuhp callback list, we can't reuse it,
otherwise use-after-free may be triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by
replacing mlx5_query_mac_address() with ether_addr_copy() to get the
local MAC address directly from netdev->dev_addr.
The issue occurs because mlx5_query_mac_address() queries the hardware
which involves mlx5_cmd_exec() that can sleep, but it is called from
the mlx5e_ipsec_handle_event workqueue which runs in atomic context.
The MAC address is already available in netdev->dev_addr, so no need
to query hardware. This avoids the sleeping call and resolves the bug.
Call trace:
BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200
__schedule+0x7ab/0xa20
schedule+0x1c/0xb0
schedule_timeout+0x6e/0xf0
__wait_for_common+0x91/0x1b0
cmd_exec+0xa85/0xff0 [mlx5_core]
mlx5_cmd_exec+0x1f/0x50 [mlx5_core]
mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core]
mlx5_query_mac_address+0x19/0x30 [mlx5_core]
mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core]
mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core]
mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core]
process_one_work+0x178/0x2e0
worker_thread+0x2ea/0x430 |
| In the Linux kernel, the following vulnerability has been resolved:
soc: ti: pruss: Fix double free in pruss_clk_mux_setup()
In the pruss_clk_mux_setup(), the devm_add_action_or_reset() indirectly
calls pruss_of_free_clk_provider(), which calls of_node_put(clk_mux_np)
on the error path. However, after the devm_add_action_or_reset()
returns, the of_node_put(clk_mux_np) is called again, causing a double
free.
Fix by returning directly, to avoid the duplicate of_node_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: consume xmit errors of GSO frames
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link). |
| In the Linux kernel, the following vulnerability has been resolved:
atm: fore200e: fix use-after-free in tasklets during device removal
When the PCA-200E or SBA-200E adapter is being detached, the fore200e
is deallocated. However, the tx_tasklet or rx_tasklet may still be running
or pending, leading to use-after-free bug when the already freed fore200e
is accessed again in fore200e_tx_tasklet() or fore200e_rx_tasklet().
One of the race conditions can occur as follows:
CPU 0 (cleanup) | CPU 1 (tasklet)
fore200e_pca_remove_one() | fore200e_interrupt()
fore200e_shutdown() | tasklet_schedule()
kfree(fore200e) | fore200e_tx_tasklet()
| fore200e-> // UAF
Fix this by ensuring tx_tasklet or rx_tasklet is properly canceled before
the fore200e is released. Add tasklet_kill() in fore200e_shutdown() to
synchronize with any pending or running tasklets. Moreover, since
fore200e_reset() could prevent further interrupts or data transfers,
the tasklet_kill() should be placed after fore200e_reset() to prevent
the tasklet from being rescheduled in fore200e_interrupt(). Finally,
it only needs to do tasklet_kill() when the fore200e state is greater
than or equal to FORE200E_STATE_IRQ, since tasklets are uninitialized
in earlier states. In a word, the tasklet_kill() should be placed in
the FORE200E_STATE_IRQ branch within the switch...case structure.
This bug was identified through static analysis. |
| In IMS, there is a possible system crash due to improper input validation. This could lead to remote denial of service with no additional execution privileges needed. |
| In the Linux kernel, the following vulnerability has been resolved:
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ... |
| An out-of-bounds read in the ParseIP6Extended function (/bgp/bgp.go) of gobgp v4.3.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted BGP UPDATE message. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Fix pci_slot_trylock() error handling
Commit a4e772898f8b ("PCI: Add missing bridge lock to pci_bus_lock()")
delegates the bridge device's pci_dev_trylock() to pci_bus_trylock() in
pci_slot_trylock(), but it forgets to remove the corresponding
pci_dev_unlock() when pci_bus_trylock() fails.
Before a4e772898f8b, the code did:
if (!pci_dev_trylock(dev)) /* <- lock bridge device */
goto unlock;
if (dev->subordinate) {
if (!pci_bus_trylock(dev->subordinate)) {
pci_dev_unlock(dev); /* <- unlock bridge device */
goto unlock;
}
}
After a4e772898f8b the bridge-device lock is no longer taken, but the
pci_dev_unlock(dev) on the failure path was left in place, leading to the
bug.
This yields one of two errors:
1. A warning that the lock is being unlocked when no one holds it.
2. An incorrect unlock of a lock that belongs to another thread.
Fix it by removing the now-redundant pci_dev_unlock(dev) on the failure
path.
[Same patch later posted by Keith at
https://patch.msgid.link/[email protected]] |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE -
which is a valid index - so add a check for this. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate sequence number of TX release report
Hardware rarely reports abnormal sequence number in TX release report,
which will access out-of-bounds of wd_ring->pages array, causing NULL
pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 1 PID: 1085 Comm: irq/129-rtw89_p Tainted: G S U
6.1.145-17510-g2f3369c91536 #1 (HASH:69e8 1)
Call Trace:
<IRQ>
rtw89_pci_release_tx+0x18f/0x300 [rtw89_pci (HASH:4c83 2)]
rtw89_pci_napi_poll+0xc2/0x190 [rtw89_pci (HASH:4c83 2)]
net_rx_action+0xfc/0x460 net/core/dev.c:6578 net/core/dev.c:6645 net/core/dev.c:6759
handle_softirqs+0xbe/0x290 kernel/softirq.c:601
? rtw89_pci_interrupt_threadfn+0xc5/0x350 [rtw89_pci (HASH:4c83 2)]
__local_bh_enable_ip+0xeb/0x120 kernel/softirq.c:499 kernel/softirq.c:423
</IRQ>
<TASK>
rtw89_pci_interrupt_threadfn+0xf8/0x350 [rtw89_pci (HASH:4c83 2)]
? irq_thread+0xa7/0x340 kernel/irq/manage.c:0
irq_thread+0x177/0x340 kernel/irq/manage.c:1205 kernel/irq/manage.c:1314
? thaw_kernel_threads+0xb0/0xb0 kernel/irq/manage.c:1202
? irq_forced_thread_fn+0x80/0x80 kernel/irq/manage.c:1220
kthread+0xea/0x110 kernel/kthread.c:376
? synchronize_irq+0x1a0/0x1a0 kernel/irq/manage.c:1287
? kthread_associate_blkcg+0x80/0x80 kernel/kthread.c:331
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
To prevent crash, validate rpp_info.seq before using. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: Fix a NULL pointer dereference in ath12k_mac_op_hw_scan()
In ath12k_mac_op_hw_scan(), the return value of kzalloc() is directly
used in memcpy(), which may lead to a NULL pointer dereference on
failure of kzalloc().
Fix this bug by adding a check of arg.extraie.ptr.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Release the label when replacing existing ct entry
Cited commit doesn't release the label mapping when replacing existing ct
entry which leads to following memleak report:
unreferenced object 0xffff8881854cf280 (size 96):
comm "kworker/u48:74", pid 23093, jiffies 4296664564 (age 175.944s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<000000002722d368>] __kmalloc+0x4b/0x1c0
[<00000000cc44e18f>] mapping_add+0x6e8/0xc90 [mlx5_core]
[<000000003ad942a7>] mlx5_get_label_mapping+0x66/0xe0 [mlx5_core]
[<00000000266308ac>] mlx5_tc_ct_entry_create_mod_hdr+0x1c4/0xf50 [mlx5_core]
[<000000009a768b4f>] mlx5_tc_ct_entry_add_rule+0x16f/0xaf0 [mlx5_core]
[<00000000a178f3e5>] mlx5_tc_ct_block_flow_offload_add+0x10cb/0x1f90 [mlx5_core]
[<000000007b46c496>] mlx5_tc_ct_block_flow_offload+0x14a/0x630 [mlx5_core]
[<00000000a9a18ac5>] nf_flow_offload_tuple+0x1a3/0x390 [nf_flow_table]
[<00000000d0881951>] flow_offload_work_handler+0x257/0xd30 [nf_flow_table]
[<000000009e4935a4>] process_one_work+0x7c2/0x13e0
[<00000000f5cd36a7>] worker_thread+0x59d/0xec0
[<00000000baed1daf>] kthread+0x28f/0x330
[<0000000063d282a4>] ret_from_fork+0x1f/0x30
Fix the issue by correctly releasing the label mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: Fix potential stack-out-of-bounds write in ath9k_wmi_rsp_callback()
Fix a stack-out-of-bounds write that occurs in a WMI response callback
function that is called after a timeout occurs in ath9k_wmi_cmd().
The callback writes to wmi->cmd_rsp_buf, a stack-allocated buffer that
could no longer be valid when a timeout occurs. Set wmi->last_seq_id to
0 when a timeout occurred.
Found by a modified version of syzkaller.
BUG: KASAN: stack-out-of-bounds in ath9k_wmi_ctrl_rx
Write of size 4
Call Trace:
memcpy
ath9k_wmi_ctrl_rx
ath9k_htc_rx_msg
ath9k_hif_usb_reg_in_cb
__usb_hcd_giveback_urb
usb_hcd_giveback_urb
dummy_timer
call_timer_fn
run_timer_softirq
__do_softirq
irq_exit_rcu
sysvec_apic_timer_interrupt |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7921: fix error code of return in mt7921_acpi_read
Kernel NULL pointer dereference when ACPI SAR table isn't implemented well.
Fix the error code of return to mark the ACPI SAR table as invalid.
[ 5.077128] mt7921e 0000:06:00.0: sar cnt = 0
[ 5.077381] BUG: kernel NULL pointer dereference, address:
0000000000000004
[ 5.077630] #PF: supervisor read access in kernel mode
[ 5.077883] #PF: error_code(0x0000) - not-present page
[ 5.078138] PGD 0 P4D 0
[ 5.078398] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 5.079202] RIP: 0010:mt7921_init_acpi_sar+0x106/0x220
[mt7921_common]
...
[ 5.080786] Call Trace:
[ 5.080786] <TASK>
[ 5.080786] mt7921_register_device+0x37d/0x490 [mt7921_common]
[ 5.080786] mt7921_pci_probe.part.0+0x2ee/0x310 [mt7921e]
[ 5.080786] mt7921_pci_probe+0x52/0x70 [mt7921e]
[ 5.080786] local_pci_probe+0x47/0x90
[ 5.080786] pci_call_probe+0x55/0x190
[ 5.080786] pci_device_probe+0x84/0x120 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmemmap/devdax: fix kernel crash when probing devdax devices
commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for
compound devmaps") added support for using optimized vmmemap for devdax
devices. But how vmemmap mappings are created are architecture specific.
For example, powerpc with hash translation doesn't have vmemmap mappings
in init_mm page table instead they are bolted table entries in the
hardware page table
vmemmap_populate_compound_pages() used by vmemmap optimization code is not
aware of these architecture-specific mapping. Hence allow architecture to
opt for this feature. I selected architectures supporting
HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature.
This patch fixes the below crash on ppc64.
BUG: Unable to handle kernel data access on write at 0xc00c000100400038
Faulting instruction address: 0xc000000001269d90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a
Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries
NIP: c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000
REGS: c000000003632c30 TRAP: 0300 Not tainted (6.3.0-rc5-150500.34-default+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24842228 XER: 00000000
CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0
....
NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c
LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0
Call Trace:
[c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable)
[c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250
[c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0
[c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0
[c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0
[c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140
[c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520
[c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120
[c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0
[c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130
[c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250
[c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110
[c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10
[c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530
[c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270
[c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70
[c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0
[c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520
[c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120
[c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240
[c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130
[c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50
[c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300
[c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0
[c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100
[c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48
[c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320
[c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400
[c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0
[c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64 |
| In the Linux kernel, the following vulnerability has been resolved:
HID: amd_sfh: Fix for shift-out-of-bounds
Shift operation of 'exp' and 'shift' variables exceeds the maximum number
of shift values in the u32 range leading to UBSAN shift-out-of-bounds.
...
[ 6.120512] UBSAN: shift-out-of-bounds in drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_desc.c:149:50
[ 6.120598] shift exponent 104 is too large for 64-bit type 'long unsigned int'
[ 6.120659] CPU: 4 PID: 96 Comm: kworker/4:1 Not tainted 6.4.0amd_1-next-20230519-dirty #10
[ 6.120665] Hardware name: AMD Birman-PHX/Birman-PHX, BIOS SFH_with_HPD_SEN.FD 04/05/2023
[ 6.120667] Workqueue: events amd_sfh_work_buffer [amd_sfh]
[ 6.120687] Call Trace:
[ 6.120690] <TASK>
[ 6.120694] dump_stack_lvl+0x48/0x70
[ 6.120704] dump_stack+0x10/0x20
[ 6.120707] ubsan_epilogue+0x9/0x40
[ 6.120716] __ubsan_handle_shift_out_of_bounds+0x10f/0x170
[ 6.120720] ? psi_group_change+0x25f/0x4b0
[ 6.120729] float_to_int.cold+0x18/0xba [amd_sfh]
[ 6.120739] get_input_rep+0x57/0x340 [amd_sfh]
[ 6.120748] ? __schedule+0xba7/0x1b60
[ 6.120756] ? __pfx_get_input_rep+0x10/0x10 [amd_sfh]
[ 6.120764] amd_sfh_work_buffer+0x91/0x180 [amd_sfh]
[ 6.120772] process_one_work+0x229/0x430
[ 6.120780] worker_thread+0x4a/0x3c0
[ 6.120784] ? __pfx_worker_thread+0x10/0x10
[ 6.120788] kthread+0xf7/0x130
[ 6.120792] ? __pfx_kthread+0x10/0x10
[ 6.120795] ret_from_fork+0x29/0x50
[ 6.120804] </TASK>
...
Fix this by adding the condition to validate shift ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm: Fix memleak of pmu attr_groups in unregister_nvdimm_pmu()
Memory pointed by 'nd_pmu->pmu.attr_groups' is allocated in function
'register_nvdimm_pmu' and is lost after 'kfree(nd_pmu)' call in function
'unregister_nvdimm_pmu'. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix possible double unlock when moving a directory |
