| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libdm. A local attacker could craft a malicious Logical Volume Manager (LVM) metadata configuration with deeply nested structures. This could lead to uncontrolled recursion in the libdm configuration file parser, exhausting the stack and causing any LVM command reading the metadata to crash. This vulnerability results in a Denial of Service (DoS) for affected systems. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to version 3.14.0, using ``CookieJar.load()`` with untrusted input may allow arbitrary code execution. Most applications using this function will be doing so with the user's own data, so this is unlikely to affect many applications. Version 3.14.0 patches the issue. If an application does allow attacker controlled files to be loaded, a workaround on older releases would be to sanitize the files before loading. |
| The 'podman quadlet install --replace' command opens the existing destination file with O_CREATE|O_WRONLY but omits O_TRUNC. When the initial reflink copy attempt fails (common on non-reflink-capable filesystems including many RHEL default XFS configurations), the fallback in ReflinkOrCopy uses io.Copy which performs a non-truncating write. If the original Quadlet is larger than the new Quadlet, the file is not truncated and content from the original is preserved. The command completes with no warning.
There is no risk of information leakage as the user already had access to the Quadlet in order to replace it, and in most cases, this would only lead to invalid Quadlet files. However, security-related options from the end of the old Quadlet could be included in the new Quadlet, and if the truncation resulted in a valid Quadlet file, this could result in undesirable behavior. For example, running podman quadlet install --replace to remove a single line from the end of a Quadlet - including security-sensitive content, like AddCapability - will fail, and the option will continue to be used. Further, with Volume Quadlets, this can include additional mounts which can cause content to be unintentionally exposed into containers. If, later, the image is updated then compromised content might be leaked to an attacker.
The vulnerable code paths are in pkg/domain/infra/abi/quadlet.go (lines 338-360, O_CREATE|O_WRONLY without O_TRUNC) and vendor/go.podman.io/storage/pkg/fileutils/reflink_linux.go (lines 12-19, non-truncating io.Copy fallback). |
| A symlink following vulnerability was found in KubeVirt's virt-handler migration proxy. During live migration, virt-handler dials Unix sockets inside the target virt-launcher pod via /proc/<pid>/root/ paths using net.Dial() without symlink protection. These socket paths reside in qemu-owned directories writable by the virt-launcher user. An attacker with namespace edit and pods/exec permissions can replace a migration proxy socket with a symlink to the host CRI-O socket. Because virt-handler runs as root in the host mount namespace, absolute symlink targets resolve against the host filesystem, and the bidirectional io.Copy proxy relays attacker-controlled bytes to the container runtime, enabling full node compromise. |
| `openvt -u` is intended to identify the owner of the current VT and then execute `login` as that user from a privileged context. In the documented `kbrequest`/init usage, the ownership test in `authenticate_user()` relies on `stat("/proc/<pid>/fd/0")`. `stat()` on `/proc/<pid>/fd/0` follows the symlink to the underlying TTY device node. As a result, `buf.st_uid` reflects the owner of the TTY node rather than the owner of the process holding the file descriptor. If the TTY owner returns to `root` or the getty owner after logout while an unprivileged process still has `fd 0` attached to that TTY, the check can incorrectly treat that process as belonging to the privileged console owner. Once that check succeeds, the `-u` path executes a passwordless login as the selected user. In the documented `kbrequest`/init deployment using `openvt -us`, this can result in passwordless `login -f root` on the spawned VT. This report establishes that privilege escalation path for that documented deployment; it does not claim equivalent reachability for deployments that do not use `openvt -u` from a privileged `kbrequest`/init path. |
| A flaw was found in dracut. The die() error-handling function writes its message into a shell script under the initramfs emergency-hook directory without properly shell-quoting it. When the message contains data derived from the DHCP ROOT_PATH option, an attacker on the adjacent network who controls a rogue DHCP server can inject a command-substitution sequence that executes as root the next time dracut sources its emergency hook scripts during standard boot-failure handling. |
| A double free issue has been identified in libarchive's RAR5 reader. During parsing of a specially crafted RAR5 archive, the filtered_buf pointer may remain stale after being freed during unpacking state reinitialization. Subsequent processing of another archive entry can trigger a second free of the same memory region, resulting in a double-free condition. Successful exploitation may cause applications using the vulnerable libarchive API to terminate unexpectedly, leading to a denial of service. |
| A flaw was found in p11-kit. The RPC message attribute parsing functions p11_rpc_message_get_attribute() and p11_rpc_message_get_attribute_array_value() form a mutually-recursive call chain with no recursion depth limit when processing nested CKA_WRAP_TEMPLATE, CKA_UNWRAP_TEMPLATE, and CKA_DERIVE_TEMPLATE attributes. An unauthenticated attacker with local access to the p11-kit RPC Unix domain socket can send a specially crafted request with deeply nested template attributes, causing stack exhaustion and crashing the p11-kit server process and its dependent services. |
| A TOCTOU (Time-of-Check Time-of-Use) vulnerability in GNU tar's incremental dumpdir 'X' rename handling allows a local attacker with write access to a directory being backed up to influence the restore process if the attacker has access to the system where the restore is being performed. During restoration, files or directories may be created, renamed or overwritten outside the intended extraction directory. This could lead to unauthorized file modification or, in some cases, privilege escalation. Exploitation does not require the attacker to modify or craft the archive, and standard backup and restore workflows—including extracting into a newly created directory without using the -P option do not mitigate the issue. |
| A Server-Side Request Forgery and supply chain flaw was found in the OpenShift Console Helm catalog proxy. A namespace tenant can plant a ProjectHelmChartRepository with an arbitrary URL that the console pod fetches server-side, bypassing tenant egress restrictions. Combined with catalog metadata poisoning and admin-mediated chart installation, this enables privilege escalation. |
| An authenticated SSRF flaw was found in the OpenShift Console Dev Console webhook helpers. User-supplied target URLs are fetched server-side without validation, with path neutralization enabling arbitrary endpoint targeting and full response reflection from the console pod's privileged network position. |
| A flaw was found in the oauth-server component. This open redirect vulnerability occurs when the 'then' parameter in the grant approval handler is not properly validated. A remote attacker can craft a malicious URL that, when approved or denied by an authenticated user, redirects them to an attacker-controlled website. This could enable phishing attacks, potentially tricking users into revealing sensitive information. |
| Multiple Use-After-Free vulnerabilities were found in the add_archive_element function in ld/ldmain.c of the GNU linker (ld), a component of binutils. The root cause is that plugin_maybe_claim() in ld/plugin.c frees the original BFD object via bfd_close/_bfd_delete_bfd when entry->the_bfd->my_archive == NULL, but the caller retains both the original abfd parameter and a shallow copy (orig_input.the_bfd) as dangling pointers. These dangling pointers are subsequently dereferenced at three distinct locations in add_archive_element:
1. Line ~1442: accessing abfd->my_archive via bfd_usrdata(abfd->my_archive)
2. Line ~1493: multiple accesses to abfd and abfd->my_archive in a conditional check and bfd_get_filename call
3. Line ~1525: dereferencing the shallow copy orig_input.the_bfd->my_archive in trace/verbose logging
The vulnerability is triggered when LTO plugins are active (link_info.lto_plugin_active is true) and the input object has abfd->my_archive == NULL, which is a valid state for standalone object files. Red Hat builds binutils with --enable-plugins and --enable-lto, confirming the vulnerable code path is compiled in and reachable.
An attacker who can supply a crafted object or archive file to a build process using LTO-enabled linking could exploit this flaw to cause a denial of service (linker crash via segmentation fault). Arbitrary code execution is theoretically possible through heap manipulation but is substantially mitigated by hardening measures including stack protector, FORTIFY_SOURCE, ASLR, and PIE.
The attack surface is limited to build-time environments — the linker is a development tool not exposed in production runtime. The most realistic exploitation scenario is a supply chain attack introducing a crafted object file as a build dependency in CI/CD pipelines or development environments. |
| A flaw was found in libarchive. This vulnerability allows a remote attacker to trigger a heap overflow by providing a specially crafted tar archive. The issue occurs during the parsing of a PAX extended header containing a malformed SUN.holesdata sparse-file attribute. Successful exploitation could lead to a denial of service, making the system unavailable, or potentially allow for arbitrary code execution, giving the attacker control over the affected system. |
| A flaw was found in odh-dashboard. An authenticated user of the dashboard can exploit a vulnerability related to how RoleBindings are created. The system does not properly validate the `roleRef` field, allowing a user to specify an arbitrary role, including highly privileged ones like `cluster-admin`. This can lead to privilege escalation, where an attacker gains unauthorized elevated access within their namespace and potentially persistent control over the system. |
| A flaw was found in openshift/oauth-proxy. The proxy sets authenticated identity headers using only dash-variant keys (X-Forwarded-User) but does not strip underscore-variant keys (X_Forwarded_User) from incoming requests. WSGI and PHP frameworks normalize both variants to the same variable, allowing an authenticated low-privilege user to smuggle a forged identity that may override the legitimate authenticated identity in the upstream application. |
| A flaw was found in the Konnectivity proxy-server configuration for hosted control planes. The agent-facing listener was started without --cluster-ca-cert (and without token-based agent authentication), so client certificates were not validated. A remote attacker who can reach the Konnectivity cluster endpoint could connect as an unauthenticated agent, join the routing pool, and potentially proxy, inspect, modify, or drop control-plane-to-node traffic. |
| A flaw was found in the System Security Services Daemon (SSSD). The pam_passkey_child_read_data() function within the PAM passkey responder fails to properly handle raw bytes received from a pipe. Because the data is treated as a NUL-terminated C string without explicit termination, it results in an out-of-bounds read when processed by functions like snprintf(). A local attacker could potentially trigger this vulnerability by initiating a crafted passkey authentication request, causing the SSSD PAM responder to crash, resulting in a local Denial of Service (DoS). |
| A flaw was found in the Red Hat OpenShift AI (RHOAI) overlay for the training operator. The RHOAI overlay incorrectly aggregates `trainjobs` management permissions into the native Kubernetes `edit ClusterRole`. This allows any user with `edit ClusterRole` permissions in a namespace to create, modify, and delete `TrainJobs`. When combined with a separate vulnerability (TRN-01) that permits arbitrary pod configurations, a remote attacker with namespace editor privileges could exploit this to escalate privileges, potentially leading to arbitrary code execution. |
| A flaw was found in the Feast operator. A malicious tenant could inject arbitrary code into their feature repository. This code would be executed by an automated process with elevated privileges, allowing the tenant to steal sensitive credentials. This could lead to a direct escalation of privileges, granting the tenant administrative control over the Kubernetes cluster. |
