Export limit exceeded: 10145 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10145 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26991 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-11-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: x86: Don't overflow lpage_info when checking attributes Fix KVM_SET_MEMORY_ATTRIBUTES to not overflow lpage_info array and trigger KASAN splat, as seen in the private_mem_conversions_test selftest. When memory attributes are set on a GFN range, that range will have specific properties applied to the TDP. A huge page cannot be used when the attributes are inconsistent, so they are disabled for those the specific huge pages. For internal KVM reasons, huge pages are also not allowed to span adjacent memslots regardless of whether the backing memory could be mapped as huge. What GFNs support which huge page sizes is tracked by an array of arrays 'lpage_info' on the memslot, of ‘kvm_lpage_info’ structs. Each index of lpage_info contains a vmalloc allocated array of these for a specific supported page size. The kvm_lpage_info denotes whether a specific huge page (GFN and page size) on the memslot is supported. These arrays include indices for unaligned head and tail huge pages. Preventing huge pages from spanning adjacent memslot is covered by incrementing the count in head and tail kvm_lpage_info when the memslot is allocated, but disallowing huge pages for memory that has mixed attributes has to be done in a more complicated way. During the KVM_SET_MEMORY_ATTRIBUTES ioctl KVM updates lpage_info for each memslot in the range that has mismatched attributes. KVM does this a memslot at a time, and marks a special bit, KVM_LPAGE_MIXED_FLAG, in the kvm_lpage_info for any huge page. This bit is essentially a permanently elevated count. So huge pages will not be mapped for the GFN at that page size if the count is elevated in either case: a huge head or tail page unaligned to the memslot or if KVM_LPAGE_MIXED_FLAG is set because it has mixed attributes. To determine whether a huge page has consistent attributes, the KVM_SET_MEMORY_ATTRIBUTES operation checks an xarray to make sure it consistently has the incoming attribute. Since level - 1 huge pages are aligned to level huge pages, it employs an optimization. As long as the level - 1 huge pages are checked first, it can just check these and assume that if each level - 1 huge page contained within the level sized huge page is not mixed, then the level size huge page is not mixed. This optimization happens in the helper hugepage_has_attrs(). Unfortunately, although the kvm_lpage_info array representing page size 'level' will contain an entry for an unaligned tail page of size level, the array for level - 1 will not contain an entry for each GFN at page size level. The level - 1 array will only contain an index for any unaligned region covered by level - 1 huge page size, which can be a smaller region. So this causes the optimization to overflow the level - 1 kvm_lpage_info and perform a vmalloc out of bounds read. In some cases of head and tail pages where an overflow could happen, callers skip the operation completely as KVM_LPAGE_MIXED_FLAG is not required to prevent huge pages as discussed earlier. But for memslots that are smaller than the 1GB page size, it does call hugepage_has_attrs(). In this case the huge page is both the head and tail page. The issue can be observed simply by compiling the kernel with CONFIG_KASAN_VMALLOC and running the selftest “private_mem_conversions_test”, which produces the output like the following: BUG: KASAN: vmalloc-out-of-bounds in hugepage_has_attrs+0x7e/0x110 Read of size 4 at addr ffffc900000a3008 by task private_mem_con/169 Call Trace: dump_stack_lvl print_report ? __virt_addr_valid ? hugepage_has_attrs ? hugepage_has_attrs kasan_report ? hugepage_has_attrs hugepage_has_attrs kvm_arch_post_set_memory_attributes kvm_vm_ioctl It is a little ambiguous whether the unaligned head page (in the bug case also the tail page) should be expected to have KVM_LPAGE_MIXED_FLAG set. It is not functionally required, as the unal ---truncated--- | ||||
| CVE-2025-37739 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-11-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-bounds access in f2fs_truncate_inode_blocks() syzbot reports an UBSAN issue as below: ------------[ cut here ]------------ UBSAN: array-index-out-of-bounds in fs/f2fs/node.h:381:10 index 18446744073709550692 is out of range for type '__le32[5]' (aka 'unsigned int[5]') CPU: 0 UID: 0 PID: 5318 Comm: syz.0.0 Not tainted 6.14.0-rc3-syzkaller-00060-g6537cfb395f3 #0 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 ubsan_epilogue lib/ubsan.c:231 [inline] __ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429 get_nid fs/f2fs/node.h:381 [inline] f2fs_truncate_inode_blocks+0xa5e/0xf60 fs/f2fs/node.c:1181 f2fs_do_truncate_blocks+0x782/0x1030 fs/f2fs/file.c:808 f2fs_truncate_blocks+0x10d/0x300 fs/f2fs/file.c:836 f2fs_truncate+0x417/0x720 fs/f2fs/file.c:886 f2fs_file_write_iter+0x1bdb/0x2550 fs/f2fs/file.c:5093 aio_write+0x56b/0x7c0 fs/aio.c:1633 io_submit_one+0x8a7/0x18a0 fs/aio.c:2052 __do_sys_io_submit fs/aio.c:2111 [inline] __se_sys_io_submit+0x171/0x2e0 fs/aio.c:2081 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f238798cde9 index 18446744073709550692 (decimal, unsigned long long) = 0xfffffffffffffc64 (hexadecimal, unsigned long long) = -924 (decimal, long long) In f2fs_truncate_inode_blocks(), UBSAN detects that get_nid() tries to access .i_nid[-924], it means both offset[0] and level should zero. The possible case should be in f2fs_do_truncate_blocks(), we try to truncate inode size to zero, however, dn.ofs_in_node is zero and dn.node_page is not an inode page, so it fails to truncate inode page, and then pass zeroed free_from to f2fs_truncate_inode_blocks(), result in this issue. if (dn.ofs_in_node || IS_INODE(dn.node_page)) { f2fs_truncate_data_blocks_range(&dn, count); free_from += count; } I guess the reason why dn.node_page is not an inode page could be: there are multiple nat entries share the same node block address, once the node block address was reused, f2fs_get_node_page() may load a non-inode block. Let's add a sanity check for such condition to avoid out-of-bounds access issue. | ||||
| CVE-2024-25569 | 3 Fedoraproject, Grassroots Dicom Project, Malaterre | 3 Fedora, Grassroots Dicom, Grassroots Dicom | 2025-11-04 | 6.5 Medium |
| An out-of-bounds read vulnerability exists in the RAWCodec::DecodeBytes functionality of Mathieu Malaterre Grassroot DICOM 3.0.23. A specially crafted DICOM file can lead to an out-of-bounds read. An attacker can provide a malicious file to trigger this vulnerability. | ||||
| CVE-2024-0107 | 2 Microsoft, Nvidia | 8 Windows, Cloud Gaming, Geforce and 5 more | 2025-11-04 | 7.8 High |
| NVIDIA GPU Display Driver for Windows contains a vulnerability in the user mode layer, where an unprivileged regular user can cause an out-of-bounds read. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. | ||||
| CVE-2024-43110 | 1 Freebsd | 1 Freebsd | 2025-11-04 | 8.4 High |
| The ctl_request_sense function could expose up to three bytes of the kernel heap to userspace. Malicious software running in a guest VM that exposes virtio_scsi can exploit the vulnerabilities to achieve code execution on the host in the bhyve userspace process, which typically runs as root. Note that bhyve runs in a Capsicum sandbox, so malicious code is constrained by the capabilities available to the bhyve process. A malicious iSCSI initiator could achieve remote code execution on the iSCSI target host. | ||||
| CVE-2024-36981 | 1 Openplcproject | 2 Openplc V3, Openplc V3 Firmware | 2025-11-04 | 7.5 High |
| An out-of-bounds read vulnerability exists in the OpenPLC Runtime EtherNet/IP PCCC parser functionality of OpenPLC_v3 b4702061dc14d1024856f71b4543298d77007b88. A specially crafted network request can lead to denial of service. An attacker can send a series of EtherNet/IP requests to trigger this vulnerability.This is the final instance of the incorrect comparison. | ||||
| CVE-2024-36980 | 1 Openplcproject | 2 Openplc V3, Openplc V3 Firmware | 2025-11-04 | 7.5 High |
| An out-of-bounds read vulnerability exists in the OpenPLC Runtime EtherNet/IP PCCC parser functionality of OpenPLC_v3 b4702061dc14d1024856f71b4543298d77007b88. A specially crafted network request can lead to denial of service. An attacker can send a series of EtherNet/IP requests to trigger this vulnerability.This is the first instance of the incorrect comparison. | ||||
| CVE-2023-38407 | 2 Frrouting, Redhat | 3 Frrouting, Enterprise Linux, Rhel Eus | 2025-11-04 | 7.5 High |
| bgpd/bgp_label.c in FRRouting (FRR) before 8.5 attempts to read beyond the end of the stream during labeled unicast parsing. | ||||
| CVE-2022-28739 | 4 Apple, Debian, Redhat and 1 more | 5 Macos, Debian Linux, Enterprise Linux and 2 more | 2025-11-04 | 7.5 High |
| There is a buffer over-read in Ruby before 2.6.10, 2.7.x before 2.7.6, 3.x before 3.0.4, and 3.1.x before 3.1.2. It occurs in String-to-Float conversion, including Kernel#Float and String#to_f. | ||||
| CVE-2022-23547 | 1 Pjsip | 1 Pjsip | 2025-11-04 | 6.5 Medium |
| PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. This issue is similar to GHSA-9pfh-r8x4-w26w. Possible buffer overread when parsing a certain STUN message. The vulnerability affects applications that uses STUN including PJNATH and PJSUA-LIB. The patch is available as commit in the master branch. | ||||
| CVE-2022-23537 | 2 Debian, Teluu | 2 Debian Linux, Pjsip | 2025-11-04 | 6.5 Medium |
| PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. Buffer overread is possible when parsing a specially crafted STUN message with unknown attribute. The vulnerability affects applications that uses STUN including PJNATH and PJSUA-LIB. The patch is available as a commit in the master branch (2.13.1). | ||||
| CVE-2022-21723 | 4 Asterisk, Debian, Sangoma and 1 more | 4 Certified Asterisk, Debian Linux, Asterisk and 1 more | 2025-11-04 | 9.1 Critical |
| PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In versions 2.11.1 and prior, parsing an incoming SIP message that contains a malformed multipart can potentially cause out-of-bound read access. This issue affects all PJSIP users that accept SIP multipart. The patch is available as commit in the `master` branch. There are no known workarounds. | ||||
| CVE-2022-21722 | 2 Debian, Teluu | 2 Debian Linux, Pjsip | 2025-11-04 | 9.1 Critical |
| PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In version 2.11.1 and prior, there are various cases where it is possible that certain incoming RTP/RTCP packets can potentially cause out-of-bound read access. This issue affects all users that use PJMEDIA and accept incoming RTP/RTCP. A patch is available as a commit in the `master` branch. There are no known workarounds. | ||||
| CVE-2021-43845 | 2 Debian, Teluu | 2 Debian Linux, Pjsip | 2025-11-04 | 8.2 High |
| PJSIP is a free and open source multimedia communication library. In version 2.11.1 and prior, if incoming RTCP XR message contain block, the data field is not checked against the received packet size, potentially resulting in an out-of-bound read access. This affects all users that use PJMEDIA and RTCP XR. A malicious actor can send a RTCP XR message with an invalid packet size. | ||||
| CVE-2021-43804 | 2 Debian, Teluu | 2 Debian Linux, Pjsip | 2025-11-04 | 7.3 High |
| PJSIP is a free and open source multimedia communication library written in C language implementing standard based protocols such as SIP, SDP, RTP, STUN, TURN, and ICE. In affected versions if the incoming RTCP BYE message contains a reason's length, this declared length is not checked against the actual received packet size, potentially resulting in an out-of-bound read access. This issue affects all users that use PJMEDIA and RTCP. A malicious actor can send a RTCP BYE message with an invalid reason length. Users are advised to upgrade as soon as possible. There are no known workarounds. | ||||
| CVE-2021-43302 | 2 Debian, Teluu | 2 Debian Linux, Pjsip | 2025-11-04 | 9.1 Critical |
| Read out-of-bounds in PJSUA API when calling pjsua_recorder_create. An attacker-controlled 'filename' argument may cause an out-of-bounds read when the filename is shorter than 4 characters. | ||||
| CVE-2024-6606 | 1 Mozilla | 2 Firefox, Thunderbird | 2025-11-04 | 8.2 High |
| Clipboard code failed to check the index on an array access. This could have led to an out-of-bounds read. This vulnerability affects Firefox < 128 and Thunderbird < 128. | ||||
| CVE-2024-8929 | 3 Php, Php Group, Redhat | 3 Php, Php, Enterprise Linux | 2025-11-03 | 5.8 Medium |
| In PHP versions 8.1.* before 8.1.31, 8.2.* before 8.2.26, 8.3.* before 8.3.14, a hostile MySQL server can cause the client to disclose the content of its heap containing data from other SQL requests and possible other data belonging to different users of the same server. | ||||
| CVE-2024-7264 | 2 Haxx, Redhat | 3 Libcurl, Enterprise Linux, Service Mesh | 2025-11-03 | 6.3 Medium |
| libcurl's ASN1 parser code has the `GTime2str()` function, used for parsing an ASN.1 Generalized Time field. If given an syntactically incorrect field, the parser might end up using -1 for the length of the *time fraction*, leading to a `strlen()` getting performed on a pointer to a heap buffer area that is not (purposely) null terminated. This flaw most likely leads to a crash, but can also lead to heap contents getting returned to the application when [CURLINFO_CERTINFO](https://curl.se/libcurl/c/CURLINFO_CERTINFO.html) is used. | ||||
| CVE-2024-50279 | 1 Linux | 1 Linux Kernel | 2025-11-03 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm cache: fix out-of-bounds access to the dirty bitset when resizing dm-cache checks the dirty bits of the cache blocks to be dropped when shrinking the fast device, but an index bug in bitset iteration causes out-of-bounds access. Reproduce steps: 1. create a cache device of 1024 cache blocks (128 bytes dirty bitset) dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 131072 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc 262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. shrink the fast device to 512 cache blocks, triggering out-of-bounds access to the dirty bitset (offset 0x80) dmsetup suspend cache dmsetup reload cdata --table "0 65536 linear /dev/sdc 8192" dmsetup resume cdata dmsetup resume cache KASAN reports: BUG: KASAN: vmalloc-out-of-bounds in cache_preresume+0x269/0x7b0 Read of size 8 at addr ffffc900000f3080 by task dmsetup/131 (...snip...) The buggy address belongs to the virtual mapping at [ffffc900000f3000, ffffc900000f5000) created by: cache_ctr+0x176a/0x35f0 (...snip...) Memory state around the buggy address: ffffc900000f2f80: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900000f3080: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ^ ffffc900000f3100: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 ffffc900000f3180: f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 f8 Fix by making the index post-incremented. | ||||