Export limit exceeded: 10079 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 14863 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14863 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2020-3562 | 1 Cisco | 5 Firepower 2110, Firepower 2120, Firepower 2130 and 2 more | 2026-08-11 | 8.6 High |
| A vulnerability in the SSL/TLS inspection of Cisco Firepower Threat Defense (FTD) Software for Cisco Firepower 2100 Series firewalls could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. The vulnerability is due to improper input validation for certain fields of specific SSL/TLS messages. An attacker could exploit this vulnerability by sending a malformed SSL/TLS message through an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. No manual intervention is needed to recover the device after it has reloaded. | ||||
| CVE-2021-1402 | 1 Cisco | 16 Asa 5512-x, Asa 5515-x, Asa 5525-x and 13 more | 2026-08-11 | 8.6 High |
| A vulnerability in the software-based SSL/TLS message handler of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition. The vulnerability is due to insufficient validation of SSL/TLS messages when the device performs software-based SSL decryption. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message through an affected device. SSL/TLS messages sent to an affected device do not trigger this vulnerability. A successful exploit could allow the attacker to cause a process to crash. This crash would then trigger a reload of the device. No manual intervention is needed to recover the device after the reload. | ||||
| CVE-2020-3283 | 1 Cisco | 29 Asa 5505, Asa 5505 Firmware, Asa 5510 and 26 more | 2026-08-11 | 8.6 High |
| A vulnerability in the Secure Sockets Layer (SSL)/Transport Layer Security (TLS) handler of Cisco Firepower Threat Defense (FTD) Software when running on the Cisco Firepower 1000 Series platform could allow an unauthenticated, remote attacker to trigger a denial of service (DoS) condition on an affected device. The vulnerability is due to a communication error between internal functions. An attacker could exploit this vulnerability by sending a crafted SSL/TLS message to an affected device. A successful exploit could allow the attacker to cause a buffer underrun, which leads to a crash. The crash causes the affected device to reload. | ||||
| CVE-2024-12085 | 8 Almalinux, Archlinux, Gentoo and 5 more | 29 Almalinux, Arch Linux, Linux and 26 more | 2026-08-11 | 7.5 High |
| A flaw was found in rsync which could be triggered when rsync compares file checksums. This flaw allows an attacker to manipulate the checksum length (s2length) to cause a comparison between a checksum and uninitialized memory and leak one byte of uninitialized stack data at a time. | ||||
| CVE-2026-20156 | 1 Cisco | 3 Cisco Roomos Software, Roomos, Roomos Cloud | 2026-08-11 | 8.1 High |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-20156 are related to improper restriction of operations within the bounds of a memory buffer that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-119. | ||||
| CVE-2026-8158 | 1 Axis Communications Ab | 3 Axis File Player, Signed Media Verifier, Signed Video Framework | 2026-08-11 | 5.3 Medium |
| The Signed Video Framework contained a buffer overflow issue which could lead the application using this framework to crash. The issue exclusively affects the tools used for the validation of signed content. The AXIS OS device's signed video functionality remains unaffected. | ||||
| CVE-2021-41839 | 1 Insyde | 1 Insydeh2o | 2026-08-11 | 8.2 High |
| An issue was discovered in NvmExpressDxe in the kernel 5.0 through 5.5 in Insyde InsydeH2O. Because of an Untrusted Pointer Dereference that causes SMM memory corruption, an attacker may be able to write fixed or predictable data to SMRAM. Exploiting this issue could lead to escalating privileges to SMM. | ||||
| CVE-2021-41838 | 2 Insyde, Siemens | 29 Insydeh2o, Simatic Field Pg M5, Simatic Field Pg M5 Firmware and 26 more | 2026-08-11 | 8.2 High |
| An issue was discovered in SdHostDriver in the kernel 5.0 through 5.5 in Insyde InsydeH2O. There is an SMM callout that allows an attacker to access the System Management Mode and execute arbitrary code. This occurs because of a Numeric Range Comparison Without a Minimum Check. | ||||
| CVE-2021-41837 | 2 Insyde, Siemens | 29 Insydeh2o, Simatic Field Pg M5, Simatic Field Pg M5 Firmware and 26 more | 2026-08-11 | 8.2 High |
| An issue was discovered in AhciBusDxe in the kernel 5.0 through 5.5 in Insyde InsydeH2O. Because of an Untrusted Pointer Dereference that causes SMM memory corruption, an attacker may be able to write fixed or predictable data to SMRAM. Exploiting this issue could lead to escalating privileges to SMM. | ||||
| CVE-2021-33627 | 2 Insyde, Siemens | 29 Insydeh2o, Simatic Field Pg M5, Simatic Field Pg M5 Firmware and 26 more | 2026-08-11 | 8.2 High |
| An issue was discovered in Insyde InsydeH2O Kernel 5.0 before 05.09.11, 5.1 before 05.17.11, 5.2 before 05.27.11, 5.3 before 05.36.11, 5.4 before 05.44.11, and 5.5 before 05.52.11 affecting FwBlockServiceSmm. Software SMI services that use the Communicate() function of the EFI_SMM_COMMUNICATION_PROTOCOL do not check whether the address of the buffer is valid, which allows use of SMRAM, MMIO, or OS kernel addresses. | ||||
| CVE-2021-33625 | 3 Insyde, Netapp, Siemens | 34 Insydeh2o, Fas\/aff Bios, Ruggedcom Ape1808 and 31 more | 2026-08-11 | 7.5 High |
| An issue was discovered in Kernel 5.x in Insyde InsydeH2O, affecting HddPassword. Software SMI services that use the Communicate() function of the EFI_SMM_COMMUNICATION_PROTOCOL do not check whether the address of the buffer is valid, which allows use of SMRAM, MMIO, or OS kernel addresses. | ||||
| CVE-2026-68278 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix buffer overflows in sideband chunk accumulation drm_dp_sideband_append_payload() has three related bugs when processing device-provided sideband reply data: 1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken directly from the DP sideband header. If a device sends msg_len=0, curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len) is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow). drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy() writes 255 bytes into msg[], both far out of bounds. 2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks until curchunk_idx reaches curchunk_len, writing up to 15 bytes past the end of chunk[] into msg[]. 3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256], so the memcpy can spill into adjacent struct fields. All three are reachable from any DP MST device that can forge sideband reply messages on a physical connection. | ||||
| CVE-2026-68187 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exec: fix unsigned loop counter wrap in transfer_args_to_stack() The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes zero the loop condition index >= stop is always true. After the index == 0 iteration the decrement wraps to ULONG_MAX and bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array. The pointer has wrapped to -1. That garbage pointer is then passed to kmap_local_page() and PAGE_SIZE bytes are copied from wherever that lands into the stack of the process being created. And the loop doesn't terminate either... Getting there only requires bprm->p < PAGE_SIZE. On !MMU bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only constraint on how far bprm->p is pushed down is valid_arg_len(), i.e. that each individual string still fits in what is left. bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a single argument or environment string of a little over 31 pages leaves it in the first page: Oops - load access fault [#1] CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1 epc : __memcpy+0xd4/0xf8 ra : transfer_args_to_stack+0xaa/0xae s4 : ffffffffffffffff s2 : 0000000000000000 a1 : ffffffdc98000000 a2 : 0000000000001000 status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005 [<801a5324>] __memcpy+0xd4/0xf8 [<800d5f6a>] load_flat_binary+0x43a/0x65e [<800a2de4>] bprm_execve+0x1d4/0x316 [<800a351a>] do_execveat_common+0x12e/0x138 [<800a3d44>] __riscv_sys_execve+0x38/0x4e Kernel panic - not syncing: Fatal exception in interrupt This is an arcane bug but we should still fix it. Count down from MAX_ARG_PAGES so the loop ends when index reaches stop, stop == 0 included. The iterations performed are unchanged for every other value of stop. Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used by binfmt_flat and binfmt_elf_fdpic on nommu only. The loop predates git history. commit 7e7ec6a93434 ("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used part of the first page. The condition and the decrement are unchanged from 2.6.12-rc2. | ||||
| CVE-2026-21067 | 1 Samsung Mobile | 1 Samsung Mobile Devices | 2026-08-10 | N/A |
| Improper input validation in libsmsd.so prior to SMR Aug-2026 Release 1 allows local attackers to write out-of-bounds memory. | ||||
| CVE-2026-19341 | 1 Utt | 1 Hiper 1200gw | 2026-08-10 | 8.8 High |
| A security vulnerability has been detected in UTT HiPER 1200GW up to 2.5.3-170306. This impacts the function strcpy of the file /goform/pptpSrvGlobalConfig. Such manipulation of the argument EncryptionMode leads to stack-based buffer overflow. The attack can be executed remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2021-31979 | 1 Microsoft | 22 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 19 more | 2026-08-10 | 7.8 High |
| Windows Kernel Elevation of Privilege Vulnerability | ||||
| CVE-2026-19259 | 2 Mz-automation, Mz Automation | 2 Libiec61850, Libiec61850 | 2026-08-10 | 5.3 Medium |
| A vulnerability has been found in MZ Automation libiec61850 up to 1.6.1. The affected element is the function MmsMapping_varAccessSpecToObjectReference of the file src/iec61850/common/iec61850_common.c of the component MMS Protocol Workflow. Such manipulation of the argument GetNamedVariableListAttributesResponse.itemId leads to heap-based buffer overflow. The attack must be carried out locally. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-19108 | 2 Mz-automation, Mz Automation | 2 Libiec61850, Libiec61850 | 2026-08-08 | 5.3 Medium |
| A vulnerability was found in MZ Automation libiec61850 up to 1.6.1. The affected element is the function deleteDataSetValuesShadowBuffer of the file src/iec61850/server/mms_mapping/reporting.c of the component URCB Revalidation. The manipulation results in use after free. The attack needs to be approached locally. The exploit has been made public and could be used. Upgrading to version 1.6.2 is sufficient to fix this issue. The patch is identified as 486fd57f3aed65bb9d636ff00f9ddce2e450b168. Upgrading the affected component is advised. | ||||
| CVE-2026-19206 | 2 Mz-automation, Mz Automation | 2 Libiec61850, Libiec61850 | 2026-08-07 | 5.3 Medium |
| A security flaw has been discovered in MZ Automation libiec61850 up to 1.6.1. This affects the function SVReceiver_stopThreadless of the file src/sampled_values/sv_subscriber.c of the component ASDU Element Handler. Performing a manipulation results in heap-based buffer overflow. The attack must be initiated from a local position. The exploit has been released to the public and may be used for attacks. Upgrading to version 1.6.2 is able to mitigate this issue. The patch is named a96bd674e0238276dd1387d31d52e55229d0771e. The affected component should be upgraded. | ||||
| CVE-2026-59679 | 1 Libxfont2 | 1 Libxfont2 | 2026-08-07 | 7.5 High |
| A flaw was found in the libXfont2 font-server client. A remote attacker, by operating a malicious font server, could exploit an out-of-bounds read/write vulnerability. This occurs because the client incorrectly handles font data, leading to an out-of-bounds memory access. This can lead to privilege escalation if the X server runs with root privileges, or a denial of service (crash) if it runs as an unprivileged user. | ||||