Export limit exceeded: 24501 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (24501 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-19028 | 1 Hdfgroup | 1 Hdf5 | 2026-08-07 | 5.5 Medium |
| H5Z__filter_fletcher32 in H5Zfletcher32.c in HDF5 through 2.3.0 computes the data length to checksum by subtracting the 4-byte trailing checksum size from the input buffer size without checking that the buffer is at least 4 bytes, allowing a size_t underflow. This allows attackers to cause a denial of service (massively out-of-bounds read and application crash in H5_checksum_fletcher32) via a crafted HDF5 file with a Fletcher32-filtered chunk smaller than 4 bytes, triggered via H5Dread, e.g. by the h5ls or h5dump tools. | ||||
| CVE-2026-64573 | 1 Linux | 1 Linux Kernel | 2026-08-07 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix NVM tag length underflow in TLV parser In the TLV_TYPE_NVM branch of qca_tlv_check_data() the tag loop bound is "while (idx < length - sizeof(struct tlv_type_nvm))". "length" is a signed int from the firmware TLV header and sizeof(struct tlv_type_nvm) is a size_t (12), so "length" is converted to size_t and any firmware-supplied "length" < 12 makes the subtraction wrap to a huge value. The loop body then reads a 12-byte struct tlv_type_nvm past the end of the short vmalloc'd firmware buffer (and the EDL_TAG_ID_* handlers can write past it). Rewrite the bound as "idx + sizeof(struct tlv_type_nvm) <= length"; both operands are non-negative, so it no longer underflows and a "length" too small for one record correctly skips the loop. BUG: KASAN: vmalloc-out-of-bounds in qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421) Read of size 2 at addr ffffc900000e5004 by task kworker/u9:0/52 Workqueue: hci0 hci_power_on Call Trace: ... kasan_report (mm/kasan/report.c:595) qca_download_firmware.isra.0 (drivers/bluetooth/btqca.c:421 drivers/bluetooth/btqca.c:617) qca_uart_setup (drivers/bluetooth/btqca.c:948) qca_setup (drivers/bluetooth/hci_qca.c:2029) hci_uart_setup (drivers/bluetooth/hci_ldisc.c:438) hci_dev_open_sync (net/bluetooth/hci_sync.c:5227) hci_power_on (net/bluetooth/hci_core.c:920) process_one_work (kernel/workqueue.c:3322) worker_thread (kernel/workqueue.c:3486) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) | ||||
| CVE-2020-37121 | 1 Codeblocks | 2 Code::blocks, Code\\ | 2026-08-06 | 5.5 Medium |
| CODE::BLOCKS 16.01 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by overwriting Structured Exception Handler with crafted Unicode characters. Attackers can create a malicious text file with 1982 bytes of buffer and shellcode to trigger remote code execution. | ||||
| CVE-2026-67864 | 1 Open62541 | 1 Open62541 | 2026-08-06 | 7.5 High |
| An issue in open62541 v.1.5.5 and before allows a remote attacker to cause a denial of service via the NodeManagement type-instantiation logic component | ||||
| CVE-2026-67871 | 1 Systerel | 1 S2opc | 2026-08-06 | 7.5 High |
| Buffer Overflow vulnerability in Systerel S2OPC 1.7.3 allows a remote attacker to cause a denial of service via the AddNodes, address_space_bs.c, sopc_node_mgt_helper_internal.c, and toolkit_test_server | ||||
| CVE-2026-67866 | 1 Systerel | 1 S2opc | 2026-08-06 | 7.5 High |
| Buffer Overflow vulnerability in Systerel S2OPC 1.7.3 allows a remote attacker to cause a denial of service via the LockedStaMac_ProcessMsg_DeleteMonitoredItemsResponse and SOPC_StaMac_NewDeleteMonitoredItems in the client wrapper DeleteMonitoredItems path | ||||
| CVE-2026-56210 | 2 Aomedia, Redhat | 7 Libaom, Ai Inference Server, Enterprise Linux and 4 more | 2026-08-06 | 7.1 High |
| A heap-buffer-overflow read vulnerability was found in libaom, the reference AV1 codec implementation. A missing bounds check in the SVC (Scalable Video Coding) layer ID control function allows setting a spatial_layer_id exceeding the configured number of layers. This causes an out-of-bounds heap read of approximately 40,728 bytes when computing a layer context array index. An attacker who can influence SVC encoder parameters in a network-facing service could exploit this for information disclosure (heap content leak) or denial of service (segmentation fault from hitting unmapped memory). | ||||
| CVE-2026-67867 | 1 Systerel | 1 S2opc | 2026-08-06 | 7.5 High |
| Buffer Overflow vulnerability in Systerel S2OPC 1.7.3 allows a remote attacker to cause a denial of service via the Alarm/Conditions wrapper when processing PublishResponse EventNotificationList data | ||||
| CVE-2026-67865 | 1 Systerel | 1 S2opc | 2026-08-06 | 7.5 High |
| S2OPC 1.7.3 contains an out-of-bounds read in RepublishResponse handling. This allows a remote attacker to cause a denial of service | ||||
| CVE-2026-55980 | 1 Secureage | 1 Catchpulse | 2026-08-06 | 5.5 Medium |
| A denial-of-service vulnerability in CatchPulse could allow an attacker to conduct a stack buffer overrun attack, leading to a denial-of-service condition. | ||||
| CVE-2026-67869 | 1 Open62541 | 1 Open62541 | 2026-08-06 | 7.5 High |
| Buffer Overflow vulnerability in open62541 v1.5.5 allows a remote attacker to cause a denial of service via the Service_Call validates input arguments against runtime-resolved InputArguments metadata | ||||
| CVE-2026-71314 | 1 Nuxt | 1 Nuxt | 2026-08-06 | 7.5 High |
| Nuxt is an open-source web development framework for Vue.js. From 3.1.0 until 3.21.10 and 4.5.1, an unauthenticated attacker can use a server island v-for prop, including vforToArray and , to trigger unbounded SSR memory allocation until MAX_VFOR_LENGTH = 100000 and crash the Nuxt process. This issue is fixed in 3.21.10 and 4.5.1. | ||||
| CVE-2026-24076 | 1 Qualcomm | 105 Aqt1000, Aqt1000 Firmware, Cologne and 102 more | 2026-08-06 | 6.7 Medium |
| Memory Corruption when processing registry values with incorrect types using a direct query method. | ||||
| CVE-2026-67673 | 2026-08-05 | 4.6 Medium | ||
| A stack-based buffer overflow vulnerability exists in the cmd_edl function of OreSat Firmware v1.0. The vulnerability is triggered when processing the edl fw_flash command, where the <filename> argument is copied to a 64-byte stack buffer via memcpy without proper length validation. An attacker with physical access to the UART3 serial interface can exploit this vulnerability by sending a maliciously crafted command with an oversized filename parameter, | ||||
| CVE-2026-55767 | 1 Guzzlephp | 1 Guzzle | 2026-08-05 | 5.8 Medium |
| Guzzle is an extensible PHP HTTP client. Prior to 7.12.1, CookieJar incorrectly accepts cookies with a dot-only Domain attribute and whitespace-padded variants. SetCookie::matchesDomain() removes leading dots from the cookie domain, normalizing dot-only values to the empty string; SetCookie::validate() only rejected a strictly empty domain, so these cookies could be stored and the empty normalized domain was treated as matching any request host. An attacker-controlled origin that an application requests with a shared cookie jar can therefore set a cookie that Guzzle later sends to unrelated hosts using the same jar. This may allow cookie injection or session fixation against downstream services, depending on how those services interpret the injected cookie. This vulnerability is fixed in 7.12.1. | ||||
| CVE-2026-67860 | 1 Open62541 | 1 Open62541 | 2026-08-05 | 7.5 High |
| open62541 1.5.5 contains a heap-based buffer overflow in the default HistoryRead path when the default history database is used with the memory backend. | ||||
| CVE-2026-18485 | 1 Ni | 1 Ni-pal | 2026-08-05 | 7.8 High |
| There is a local privilege escalation vulnerability recently discovered in the NI-PAL kernel driver. This may allow a local, authenticated user to escalate privileges and execute arbitrary code. This vulnerability affects NI-PAL 26.3.1 and prior versions running on Microsoft Windows. | ||||
| CVE-2026-67862 | 1 Open62541 | 1 Open62541 | 2026-08-05 | 7.5 High |
| open62541 1.5.5 contains a buffer-overflow in the high-level attribute reading logic in src/client/ua_client_highlevel.c. This allows a remote attacker to cause a denial of service. | ||||
| CVE-2026-70598 | 1 Electron | 1 Electron | 2026-08-05 | 3.9 Low |
| Electron is a framework for writing cross-platform desktop applications using JavaScript, HTML and CSS. Prior to 39.8.10, 40.9.0, 41.2.1, and 42.0.0-beta.3, offscreen rendering frame data received from the GPU process was not fully validated by the main process. A compromised GPU process could cause the main process to read out-of-bounds memory while producing paint event images, disclosing memory or crashing the app. This issue is fixed in 39.8.10, 40.9.0, 41.2.1, and 42.0.0-beta.3. | ||||
| CVE-2026-45537 | 1 Opensips | 1 Opensips | 2026-08-05 | 9.1 Critical |
| OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the construct_uri() function concatenates multiple URI components (protocol, username, domain, port, params) into a fixed 1024-byte global BSS buffer without any bounds checking. When a routing script calls construct_uri() with an attacker-controlled username, a combined component length exceeding 1024 bytes overflows the buffer, corrupting adjacent global data with attacker-controlled content. The overflow reaches disable_503_translation, a global flag controlling SIP 503 response handling, allowing an attacker to deterministically set the flag via the URI username and alter the server's routing behavior for subsequent messages. Because the same buffer is shared with contact_builder(), the overflow also corrupts that function's data, and without a memory sanitizer the adjacent globals are silently overwritten on every request containing a long username. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1. | ||||