Export limit exceeded: 377282 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 92759 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (92759 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64002 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table() ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports too soon. Only after unregister_net_sysctl_table() we can be sure no threads can possibly use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. | ||||
| CVE-2026-64003 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. | ||||
| CVE-2026-64008 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/rocket: fix UAF via dangling GEM handle in create_bo rocket_ioctl_create_bo() inserts a GEM handle into the file's IDR via drm_gem_handle_create() early on, then performs several operations that can fail (sgt allocation, drm_mm insert, iommu_map). If any fail after the handle is live, the error path calls drm_gem_shmem_object_free() which kfree's the object without removing the handle from the IDR. This leaves a dangling handle pointing to freed slab memory. Any subsequent ioctl using that handle (PREP_BO, FINI_BO, SUBMIT) calls drm_gem_object_lookup() and dereferences freed memory (UAF). Fix by moving drm_gem_handle_create() to after all fallible operations succeed, matching the pattern used by panfrost, lima, and etnaviv. Also fix drm_mm_insert_node_generic() whose return value was silently overwritten by iommu_map_sgtable() on the next line. Add the missing error check. [tomeu: Move handle creation to the very end] | ||||
| CVE-2026-64010 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: llcp: Fix use-after-free race in nfc_llcp_recv_cc() A race condition exists in the NFC LLCP connection state machine where the connection acceptance packet (CC) can be processed concurrently with socket release. This can lead to a use-after-free of the socket object. When nfc_llcp_recv_cc() moves the socket from the connecting_sockets list to the sockets list, it does so without holding the socket lock. If llcp_sock_release() is executing concurrently, it might have already unlinked the socket and dropped its references, which can result in nfc_llcp_recv_cc() linking a freed socket into the live list. Fix this by holding lock_sock() during the state transition and list movement in nfc_llcp_recv_cc(). After acquiring the lock, check if the socket is still hashed to ensure it hasn't already been unlinked and marked for destruction by the release path. This aligns the locking pattern with recv_hdlc() and recv_disc(). | ||||
| CVE-2026-64017 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: pop cached request if it is usable When submitting a bio to blk-mq, if the task should sleep after peeking a cached request, but before it pops it, the plug flushes and calls blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a use-after-free bug. Fix this by popping the cached request before any possible blocking calls if it is suitable for use. Popping this request first holds a queue reference, so avoid any serialization races with queue freezes and can safely proceed with dispatching that request to the driver. This potentially increases a timing window from when a driver wants to freeze its queue to when requests stop being dispatched. That scenario is off the fast path though, and drivers need to appropriately handle requests during a freeze request anyway. The downside is the popped element needs to be individually freed when we performed a bio plug merge. The cached request would have had to be freed later anyway, but this patch does it inline with building the plug list instead of after flushing it. | ||||
| CVE-2026-64023 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: gpio: aggregator: fix a potential use-after-free On error we free aggr->lookups->dev_id before removing the entry from the lookup table. If a concurrent thread calls gpiod_find() before we remove the entry, it could iterate over the list and call gpiod_match_lookup_table() which unconditionally dereferences dev_id when calling strcmp(). Reverse the order of cleanup. | ||||
| CVE-2026-64027 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: rework the VALID marking (again) Recent commit changed the semantics from NOT_VALID to VALID. I didn't realize that the flags are not stored atomically with the entry in XArray. There's still a race of reader observing a VALID mark for a slot, getting interrupted, writer replacing the entry with a different one, reader continuing, fetching the entry which is now a different pointer than the pointer for which VALID was meant. The biggest consequence of this is that we may see a UAF since net_shaper_rollback() assumed that entries without VALID can be freed without observing RCU. Looks like the XArray marks are buying us nothing at this point. Let's convert the code to an explicit valid field. The smp_load_acquire() / smp_store_release() barriers are marginally cleaner. | ||||
| CVE-2026-64036 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup/rstat: validate cpu before css_rstat_cpu() access css_rstat_updated() is exposed as a BPF kfunc and accepts a caller-provided cpu argument. The function uses cpu for per-cpu rstat lookups without checking whether it refers to a valid possible CPU. A BPF iter/cgroup program with CAP_BPF and CAP_PERFMON can pass an invalid cpu value. On an unfixed UBSCAN_BOUNDS test kernel, cpu == 0x7fffffff triggers: UBSAN: array-index-out-of-bounds in kernel/cgroup/rstat.c:31:9 index 2147483647 is out of range for type 'long unsigned int [64]' Call Trace: css_rstat_updated bpf_iter_run_prog cgroup_iter_seq_show bpf_seq_read Add cpu validation to the BPF-facing css_rstat_updated() kfunc and move the common implementation to __css_rstat_updated() for in-kernel callers. | ||||
| CVE-2026-64039 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 7.7 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/msm/snapshot: fix dumping of the unaligned regions The snapshotting code internally aligns data segment to 16 bytes. This works fine for DPU code (where most of the regions are aligned), but fails for snapshotting of the DSI data (because DSI data region is shifted by 4 bytes). Fix the code by removing length alignment and by accurately printing last registers in the region. While reworking the code also fix the 16x memory overallocation in msm_disp_state_dump_regs(). Patchwork: https://patchwork.freedesktop.org/patch/725449/ | ||||
| CVE-2026-64117 | 1 Linux | 1 Linux Kernel | 2026-07-26 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb ieee80211_invoke_fast_rx() reads RX status through IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the unicast forward path, mesh_data does: info = IEEE80211_SKB_CB(fwd_skb); memset(info, 0, sizeof(*info)); on the same skb the caller still names via rx->skb, then either queues the skb for TX (success) or kfree_skb()'s it (no-route) before returning RX_QUEUED. The caller's RX_QUEUED arm then calls sta_stats_encode_rate(status) on memory that is either zeroed (success path) or freed (no-route path). The latter is KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle. Fix by encoding the rate from status before invoking ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value captured while status was still backed by valid memory. | ||||
| CVE-2026-13142 | 2026-07-26 | 8.1 High | ||
| The Social Login, Passkeys, Magic Link & Email OTP WordPress plugin before 1.4.1 does not enforce rate limiting or a working attempt lockout on its passwordless email one-time-password verification, and stores the short numeric codes in plaintext, allowing an unauthenticated attacker who knows a registered email address to brute-force the code and log in as that user, including an administrator, leading to full site takeover. | ||||
| CVE-2026-16372 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-26 | 8.8 High |
| Privilege escalation in the DOM: Content Processes component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. | ||||
| CVE-2026-16401 | 1 Mozilla | 2 Firefox, Thunderbird | 2026-07-26 | 8.8 High |
| Privilege escalation in the Data Loss Prevention component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. | ||||
| CVE-2026-56820 | 1 Netty | 1 Netty | 2026-07-26 | 7.4 High |
| Netty is a network application framework for development of protocol servers and clients. In versions 4.2.0.Final through 4.2.15.Final and prior to 4.1.135.Final, `OcspClient` does not validate that the `CertificateID` in an OCSP response matches the requested `CertificateID`, which can lead to replay attack. `OcspClient.validateResponse` accepts a legitimately signed `GOOD` status response for an unrelated certificate issued by the same CA, allowing bypass of revocation checks for another certificate. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. | ||||
| CVE-2026-66138 | 1 Openstack | 2 Ironic-python-agent, Ironic Python Agent | 2026-07-26 | 7.2 High |
| In OpenStack Ironic Python Agent through 11.6.0, a project-scoped user with the manager role can achieve arbitrary code execution on a running Ironic-Python-Agent via a maliciously constructed configuration, because the value of ntp_server is passed to a shell. | ||||
| CVE-2026-66140 | 1 Exim | 1 Exim | 2026-07-26 | 8.4 High |
| Exim before 4.99.5 allows directory traversal to access files outside of the spool area, and consequently gain privileges, because arguments related to queue-name are mishandled. | ||||
| CVE-2026-64527 | 1 Linux | 1 Linux Kernel | 2026-07-25 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/hyperv: validate VMBus packet size in receive callback hyperv_receive_sub() reads msg->vid_hdr.type and dispatches into one of four message-type branches without knowing how many bytes the host wrote into hv->recv_buf. The completion path then runs memcpy(hv->init_buf, msg, VMBUS_MAX_PACKET_SIZE), so the consumer that wakes on wait_for_completion_timeout() can read up to 16 KiB of residue from a prior message as if it were the response payload. Pass bytes_recvd into hyperv_receive_sub() and reject any packet that does not cover the pipe + synthvid header. A single switch on msg->vid_hdr.type then computes the type-specific payload size: the three completion-driving types (SYNTHVID_VERSION_RESPONSE, SYNTHVID_RESOLUTION_RESPONSE, SYNTHVID_VRAM_LOCATION_ACK) fall through to a shared exit that requires that size before memcpy/complete, while SYNTHVID_FEATURE_CHANGE validates its own payload and returns before reading is_dirt_needed. Unknown types are dropped. SYNTHVID_RESOLUTION_RESPONSE is variable length: the host fills resolution_count entries, not the full SYNTHVID_MAX_RESOLUTION_COUNT array. Validate the fixed prefix first so resolution_count can be read, bound it against the array, then require only the count-sized array, so the shorter responses the host actually sends are accepted. Only run the sub-handler when vmbus_recvpacket() returned success. The memcpy length is bytes_recvd, which is bounded by VMBUS_MAX_PACKET_SIZE only on a successful receive; on -ENOBUFS vmbus_recvpacket() instead reports the required length, which can exceed hv->recv_buf, so copying bytes_recvd would read and write past the 16 KiB buffers. Gating on the success return keeps the copy bounded. The nonzero-return path is itself a malformed-message case and is now logged rather than silently skipped; channel recovery is not attempted. Rejected packets are reported via drm_err_ratelimited() rather than silently dropped, matching the CoCo-hardened pattern in hv_kvp_onchannelcallback(). | ||||
| CVE-2026-55113 | 1 Ui | 1 Unifi Talk Application | 2026-07-25 | 7.5 High |
| A malicious actor with access to the network could exploit a Server-Side Request Forgery (SSRF) vulnerability found in UniFi Talk Application to execute a Denial of Service (DoS) attack and bypass authentication in certain UniFi Talk API endpoints. | ||||
| CVE-2026-15076 | 1 Eclipse | 1 Vert.x | 2026-07-25 | 7.5 High |
| In versions up to and including 4.5.29 (4.x branch) and 5.1.4 (5.x branch), the WebClientSession component of Eclipse Vert.x Web Client does not validate that the Domain attribute of a Set-Cookie response header matches the originating server's domain, in violation of RFC 6265 section 5.3. An attacker who controls any server that the victim application contacts can inject a cookie scoped to an arbitrary third-party domain; because the session store performs no cross-domain ownership check, it stores and later transmits that cookie to the targeted domain. When the victim application subsequently sends a request to the targeted domain using the same WebClientSession, it presents the attacker-injected cookie, causing the receiving service to process the request under the attacker's account. Sensitive data included in the victim application's requests, such as payment amounts, card details, or other API payloads, may then be accessible to the attacker through their own account on that service. | ||||
| CVE-2026-66027 | 1 Kortix-ai | 1 Suna | 2026-07-25 | 8.3 High |
| Suna before 0.9.102 contains a broken access control vulnerability in the message queue API that allows authenticated attackers to access and manipulate queue resources belonging to other users by exploiting missing ownership and account isolation checks. Attackers can read pending prompt queues of all users, read or delete individual sessions, and inject arbitrary prompts into another user's session queue, causing the background drainer to forward malicious messages to the victim's running AI agent with the victim's credentials and permissions. | ||||