Export limit exceeded: 395773 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 395773 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (395773 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97567 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: prevent race between disconnect() and rtx Sashiko noted that the two event can race, leading to inconsistent status. Prevent the race using the synchronous timer stop operation. | ||||
| CVE-2026-97570 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Bound SW TPA IDs to prevent crashes FW supports up to 1024 concurrent TPAs, so the FW TPA ID is in the range 0..1023 (see commit ec4d8e7cf024 ("bnxt_en: Add TPA ID mapping logic for 57500 chips.")). bnxt_alloc_agg_idx is intended to wrap the FW ID down to a software ID which is used to index rxr->rx_tpa, and to generate a mapping between FW IDs and the wrapped software ID. On a 57608 with firmware version 233, the firmware advertises 32 concurrent TPAs. As of the commit under fixes, bp->max_tpa on this NIC is set to 32. If the software ID from bnxt_alloc_agg_idx is above 31, this results in an invalid address being loaded on this line: tpa_info = &rxr->rx_tpa[agg_id]; because rx_tpa is allocated with only bp->max_tpa (32) entries. Writes to tpa_info later in the code are out of bounds. This bug results in a crash at boot: Oops: general protection fault, kernel NULL pointer dereference 0x8: 0000 [#1] SMP NOPTI RIP: 0010:bnxt_rx_pkt+0xc0/0x1560 RSP: 0018:ffffc900009b8c78 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000048 RCX: 0000000206682516 RDX: ffffc900009b8db4 RSI: 0000000000000000 RDI: 01ffffff038fe1c0 RBP: ffffc9006e687480 R08: ffffc9006e687000 R09: 0000000000003048 R10: 0000000000000480 R11: ffff8881c6083900 R12: 0000000006682516 R13: ffff8881c6095400 R14: 0000000000000016 R15: ffff8881c6b66680 FS: 0000000000000000(0000) GS:ffff88fef3c77000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc8bda40584 CR3: 000000807c812001 CR4: 0000000008772ef0 PKRU: 55555554 Call Trace: <IRQ> ? __netif_receive_skb_list_core+0x1ca/0x250 __bnxt_poll_work+0x152/0x280 bnxt_poll_p5+0x1cd/0x480 __napi_poll+0x30/0x180 net_rx_action+0x20b/0x3b0 ? note_gp_changes+0x53/0xe0 ? tick_setup_sched_timer+0x180/0x180 ? __napi_schedule+0x9a/0xb0 ? bnxt_msix+0x24/0x30 handle_softirqs+0xdd/0x2c0 __irq_exit_rcu.llvm.3171231171502365008+0x47/0xf0 common_interrupt+0x85/0x90 </IRQ> <TASK> asm_common_interrupt+0x22/0x40 This stack trace is from a crash triggered when an out of bounds rx_tpa is dereferenced. The invalid write mentioned above is silent in this particular crash. Fix this by allocating rx_tpa with bp->max_tpa rounded up to the next power of 2 (bp->max_tpa_roundup_size) entries and masking the FW TPA ID with that size, so the wrapped ID can never index past the end of the array. | ||||
| CVE-2026-98156 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: use the DMA API for resource backing on Xen On a Xen PV domain page addresses bear no relation to the real machine addresses the host would have to use to reach it. virtio_ring.c handles this correctly, vring_use_map_api() returns true for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM. virtio-gpu makes the same decision independently, but its copy looks only at the feature bit: bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev); QEMU does not set iommu_platform on virtio-vga by default, so VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and virtio_gpu_object_shmem_init() describes the framebuffer's backing pages to the host with sg_phys(). Those are guest-physical addresses. In a PV domain they resolve, on the host side, to pages belonging to some other domain, so the host scans out unrelated memory. Move the decision into virtio_gpu_use_dma_api() and give it the xen_domain() check, like vring_use_map_api() has. This additionally enables the dma_sync_sgtable_for_device() calls in virtgpu_vq.c, which are required for correctness whenever swiotlb is in play. Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0 works fine and doesn't need this fix because it is identity-mapped, only PV dom0s are affected. | ||||
| CVE-2026-98159 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7921: validate CLC firmware records The CLC region is supplied by firmware, but the loader trusts the region count and each record length. A malformed image can make the region table pointer precede the firmware buffer, make the record loop fail to advance, or index phy->clc past its end. Validate the table and record bounds before dereferencing or copying. | ||||
| CVE-2026-100172 | 2026-09-25 | N/A | ||
| The AIL Framework (ail-project/ail-framework) contains a stored cross-site scripting (XSS) vulnerability in two Jinja2 templates that render popovers for matched, tracked, or tagged content: var/www/templates/chats_explorer/block_message.html and var/www/templates/objects/item/show_item.html. In both templates, dynamic values associated with this content, including icon color, icon style, icon glyph, subtype, identifier, name, description, and matched value, are interpolated directly into the data-content HTML attribute of Bootstrap popover elements without appropriate output encoding. Because the popovers are configured with data-html="true", the content is interpreted as HTML in the victim's browser. An authenticated attacker who can influence matched, tracked, or tagged content may inject arbitrary HTML or JavaScript into these values. When a victim displays the affected popover, the injected markup may execute in the victim's session, potentially enabling data exfiltration or actions with the victim's privileges. The vulnerability is classified as stored XSS because the malicious payload can persist in the affected match, tracking, or tag-related data and be delivered to users who view the affected content. | ||||
| CVE-2026-69451 | 1 Microsoft | 26 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 23 more | 2026-09-25 | 7.1 High |
| Use after free in Windows Management Instrumentation allows an authorized attacker to elevate privileges over a network. | ||||
| CVE-2026-55285 | 1 Google | 1 Android | 2026-09-25 | 7.8 High |
| In openLogicalChannel of multiple files, there is a possible out-of-bounds write due to a missing bounds check. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-55277 | 1 Google | 1 Android | 2026-09-25 | 8 High |
| In checkUiccListenConfigNeeded of RoutingManager.cpp, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) code execution with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-55273 | 1 Google | 1 Android | 2026-09-25 | 7.8 High |
| In AppendCommentLine of AnnotationProcessor.cpp, there is a possible supply chain risk due to improper input validation. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. | ||||
| CVE-2026-91867 | 1 Apache | 1 Neethi | 2026-09-25 | 4.3 Medium |
| When Neethi fetches a remote policy reference, it only limits the time per read, not the whole transfer, so a server that trickles bytes slowly can keep the fetch alive indefinitely and tie up the calling thread (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue. | ||||
| CVE-2026-91864 | 1 Apache | 1 Neethi | 2026-09-25 | 7.5 High |
| A specially crafted WS-Policy document can pack unlimited content inside a policy assertion, which Neethi copies into memory without counting it against its size limits, exhausting the heap (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue. | ||||
| CVE-2026-91865 | 1 Apache | 1 Neethi | 2026-09-25 | 7.5 High |
| A small WS-Policy document using repeated policy references can force Neethi to re-expand the same references exponentially during normalization, consuming huge amounts of CPU and memory (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue. | ||||
| CVE-2026-91866 | 1 Apache | 1 Neethi | 2026-09-25 | 7.5 High |
| A specially crafted pair of WS-Policy documents can force Neethi's policy-intersection to do exponential amounts of work, pinning the CPU for a long time (denial of service). Users are recommended to upgrade to version 3.2.4, which fixes this issue. | ||||
| CVE-2026-92829 | 2 Pr-gateway, Wordpress | 2 Blog2social: Social Media Auto Post & Scheduler, Wordpress | 2026-09-25 | 4.3 Medium |
| The Blog2Social: Social Media Auto Post & Scheduler plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 9.1.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with contributor-level access and above, to view, modify, or delete other users' Blog2Social records, including disclosing another user's network authentication IDs and scheduled post content, overwriting Open Graph and Twitter Card post metadata on posts they do not own, rebinding another user's social-network authorization, and mass-hiding all users' scheduled posts sitewide. The plugin's b2s_security_nonce is emitted on the post-edit meta box, which Contributors can render, making the nonce available to any authenticated user at that role level or above. | ||||
| CVE-2026-83591 | 2 Mohammed Kaludi, Wordpress | 2 Amp For Wp – Accelerated Mobile Pages, Wordpress | 2026-09-25 | 7.2 High |
| The AMP for WP – Accelerated Mobile Pages plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Comment Content via Regex Transformation in all versions up to, and including, 1.1.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The crafted payload uses only WordPress-permitted comment tags and attributes (an anchor with href and title), and the AMP sanitizer pipeline omits javascript: protocol blocking, meaning neither the comment save filter nor the AMP output stage removes the malicious URI introduced by the transformation. | ||||
| CVE-2026-93303 | 2 Htplugins, Wordpress | 2 Ht Contact Form – Drag & Drop Form Builder For Wordpress, Wordpress | 2026-09-25 | 7.2 High |
| The HT Contact Form – Drag & Drop Form Builder for WordPress plugin for WordPress is vulnerable to Stored DOM-Based Cross-Site Scripting via 'form_data' Rich Text Field via Draft Save/Resume in all versions up to, and including, 2.10.1 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires tricking a user into clicking an attacker-supplied draft resume URL, which the attacker constructs using the draft_key and access_token returned directly in the save response. | ||||
| CVE-2026-89055 | 2 Ivole, Wordpress | 2 Customer Reviews For Woocommerce, Wordpress | 2026-09-25 | 9.1 Critical |
| The Customer Reviews for WooCommerce plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 5.120.0. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to permanently delete arbitrary attachments from the Media Library — including administrator-owned product images, logos, and documents — by injecting their IDs into a review that is later trashed and purged. Exploitation requires a public review-form link (a 13-hex formId distributed to customers via e-mail), which exposes the nonce needed to reach the handler without any WordPress account or session. | ||||
| CVE-2026-84279 | 2 Radykal, Wordpress | 2 Fancy Product Designer, Wordpress | 2026-09-25 | 7.2 High |
| The Fancy Product Designer plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'output_format' parameter in all versions up to, and including, 6.5.2 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the Pro Export/Genius feature to be enabled on the site, as the vulnerable fpd_pr_export AJAX action is only registered when that feature is active. | ||||
| CVE-2026-92212 | 2 Jetmonsters, Wordpress | 2 Jetformbuilder — Dynamic Blocks Form Builder, Wordpress | 2026-09-25 | 6.1 Medium |
| The JetFormBuilder — Dynamic Blocks Form Builder plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via 'jfb_xss' (URL Query Variable) Parameter via Calculated Field in all versions up to, and including, 3.6.5.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. Exploitation requires the targeted page to host a form configured with both a URL Query Variable preset field and a Calculated Field that references it, which are standard plugin features. | ||||
| CVE-2026-19775 | 2026-09-25 | 4.3 Medium | ||
| The OpenStation — Desktop Windows, Dock & Virtual Desktops for WP Admin plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 1.1.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with custom-level access and above, to read the title, status, date, permalink, and a 300-character content excerpt of any private, draft, pending, or future post, as well as the content and AI-moderation verdicts of unapproved and spam comments. Any authenticated user with the 'read' capability can self-enable the required AI feature by visiting the /openstation/ portal and toggling their own ai.enabled setting via the POST /desktop-mode/v1/os-settings endpoint, removing any practical barrier to exploitation. | ||||