Export limit exceeded: 47974 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (47974 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-38599 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jffs2: prevent xattr node from overflowing the eraseblock Add a check to make sure that the requested xattr node size is no larger than the eraseblock minus the cleanmarker. Unlike the usual inode nodes, the xattr nodes aren't split into parts and spread across multiple eraseblocks, which means that a xattr node must not occupy more than one eraseblock. If the requested xattr value is too large, the xattr node can spill onto the next eraseblock, overwriting the nodes and causing errors such as: jffs2: argh. node added in wrong place at 0x0000b050(2) jffs2: nextblock 0x0000a000, expected at 0000b00c jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050, read=0xfc892c93, calc=0x000000 jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed at 0x01e00c. {848f,2fc4,0fef511f,59a3d171} jffs2: Node at 0x0000000c with length 0x00001044 would run over the end of the erase block jffs2: Perhaps the file system was created with the wrong erase size? jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x00000010: 0x1044 instead This breaks the filesystem and can lead to KASAN crashes such as: BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0 Read of size 4 at addr ffff88802c31e914 by task repro/830 CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xc6/0x120 print_report+0xc4/0x620 ? __virt_addr_valid+0x308/0x5b0 kasan_report+0xc1/0xf0 ? jffs2_sum_add_kvec+0x125e/0x15d0 ? jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_sum_add_kvec+0x125e/0x15d0 jffs2_flash_direct_writev+0xa8/0xd0 jffs2_flash_writev+0x9c9/0xef0 ? __x64_sys_setxattr+0xc4/0x160 ? do_syscall_64+0x69/0x140 ? entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2024-38587 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: speakup: Fix sizeof() vs ARRAY_SIZE() bug The "buf" pointer is an array of u16 values. This code should be using ARRAY_SIZE() (which is 256) instead of sizeof() (which is 512), otherwise it can the still got out of bounds. | ||||
| CVE-2024-38577 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow There is a possibility of buffer overflow in show_rcu_tasks_trace_gp_kthread() if counters, passed to sprintf() are huge. Counter numbers, needed for this are unrealistically high, but buffer overflow is still possible. Use snprintf() with buffer size instead of sprintf(). Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38576 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: rcu: Fix buffer overflow in print_cpu_stall_info() The rcuc-starvation output from print_cpu_stall_info() might overflow the buffer if there is a huge difference in jiffies difference. The situation might seem improbable, but computers sometimes get very confused about time, which can result in full-sized integers, and, in this case, buffer overflow. Also, the unsigned jiffies difference is printed using %ld, which is normally for signed integers. This is intentional for debugging purposes, but it is not obvious from the code. This commit therefore changes sprintf() to snprintf() and adds a clarifying comment about intention of %ld format. Found by Linux Verification Center (linuxtesting.org) with SVACE. | ||||
| CVE-2024-38572 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix out-of-bound access of qmi_invoke_handler() Currently, there is no terminator entry for ath12k_qmi_msg_handlers hence facing below KASAN warning, ================================================================== BUG: KASAN: global-out-of-bounds in qmi_invoke_handler+0xa4/0x148 Read of size 8 at addr ffffffd00a6428d8 by task kworker/u8:2/1273 CPU: 0 PID: 1273 Comm: kworker/u8:2 Not tainted 5.4.213 #0 Workqueue: qmi_msg_handler qmi_data_ready_work Call trace: dump_backtrace+0x0/0x20c show_stack+0x14/0x1c dump_stack+0xe0/0x138 print_address_description.isra.5+0x30/0x330 __kasan_report+0x16c/0x1bc kasan_report+0xc/0x14 __asan_load8+0xa8/0xb0 qmi_invoke_handler+0xa4/0x148 qmi_handle_message+0x18c/0x1bc qmi_data_ready_work+0x4ec/0x528 process_one_work+0x2c0/0x440 worker_thread+0x324/0x4b8 kthread+0x210/0x228 ret_from_fork+0x10/0x18 The address belongs to the variable: ath12k_mac_mon_status_filter_default+0x4bd8/0xfffffffffffe2300 [ath12k] [...] ================================================================== Add a dummy terminator entry at the end to assist the qmi_invoke_handler() in traversing up to the terminator entry without accessing an out-of-boundary index. Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2024-38552 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix potential index out of bounds in color transformation function Fixes index out of bounds issue in the color transformation function. The issue could occur when the index 'i' exceeds the number of transfer function points (TRANSFER_FUNC_POINTS). The fix adds a check to ensure 'i' is within bounds before accessing the transfer function points. If 'i' is out of bounds, an error message is logged and the function returns false to indicate an error. Reported by smatch: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:405 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.red' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:406 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.green' 1025 <= s32max drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_cm_common.c:407 cm_helper_translate_curve_to_hw_format() error: buffer overflow 'output_tf->tf_pts.blue' 1025 <= s32max | ||||
| CVE-2024-38544 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix seg fault in rxe_comp_queue_pkt In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the resp_pkts queue and then a decision is made whether to run the completer task inline or schedule it. Finally the skb is dereferenced to bump a 'hw' performance counter. This is wrong because if the completer task is already running in a separate thread it may have already processed the skb and freed it which can cause a seg fault. This has been observed infrequently in testing at high scale. This patch fixes this by changing the order of enqueuing the packet until after the counter is accessed. | ||||
| CVE-2024-38542 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/mana_ib: boundary check before installing cq callbacks Add a boundary check inside mana_ib_install_cq_cb to prevent index overflow. | ||||
| CVE-2024-38541 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: of: module: add buffer overflow check in of_modalias() In of_modalias(), if the buffer happens to be too small even for the 1st snprintf() call, the len parameter will become negative and str parameter (if not NULL initially) will point beyond the buffer's end. Add the buffer overflow check after the 1st snprintf() call and fix such check after the strlen() call (accounting for the terminating NUL char). | ||||
| CVE-2024-36968 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.6 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init() l2cap_le_flowctl_init() can cause both div-by-zero and an integer overflow since hdev->le_mtu may not fall in the valid range. Move MTU from hci_dev to hci_conn to validate MTU and stop the connection process earlier if MTU is invalid. Also, add a missing validation in read_buffer_size() and make it return an error value if the validation fails. Now hci_conn_add() returns ERR_PTR() as it can fail due to the both a kzalloc failure and invalid MTU value. divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 0 PID: 67 Comm: kworker/u5:0 Tainted: G W 6.9.0-rc5+ #20 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Workqueue: hci0 hci_rx_work RIP: 0010:l2cap_le_flowctl_init+0x19e/0x3f0 net/bluetooth/l2cap_core.c:547 Code: e8 17 17 0c 00 66 41 89 9f 84 00 00 00 bf 01 00 00 00 41 b8 02 00 00 00 4c 89 fe 4c 89 e2 89 d9 e8 27 17 0c 00 44 89 f0 31 d2 <66> f7 f3 89 c3 ff c3 4d 8d b7 88 00 00 00 4c 89 f0 48 c1 e8 03 42 RSP: 0018:ffff88810bc0f858 EFLAGS: 00010246 RAX: 00000000000002a0 RBX: 0000000000000000 RCX: dffffc0000000000 RDX: 0000000000000000 RSI: ffff88810bc0f7c0 RDI: ffffc90002dcb66f RBP: ffff88810bc0f880 R08: aa69db2dda70ff01 R09: 0000ffaaaaaaaaaa R10: 0084000000ffaaaa R11: 0000000000000000 R12: ffff88810d65a084 R13: dffffc0000000000 R14: 00000000000002a0 R15: ffff88810d65a000 FS: 0000000000000000(0000) GS:ffff88811ac00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000100 CR3: 0000000103268003 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <TASK> l2cap_le_connect_req net/bluetooth/l2cap_core.c:4902 [inline] l2cap_le_sig_cmd net/bluetooth/l2cap_core.c:5420 [inline] l2cap_le_sig_channel net/bluetooth/l2cap_core.c:5486 [inline] l2cap_recv_frame+0xe59d/0x11710 net/bluetooth/l2cap_core.c:6809 l2cap_recv_acldata+0x544/0x10a0 net/bluetooth/l2cap_core.c:7506 hci_acldata_packet net/bluetooth/hci_core.c:3939 [inline] hci_rx_work+0x5e5/0xb20 net/bluetooth/hci_core.c:4176 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x90f/0x1530 kernel/workqueue.c:3335 worker_thread+0x926/0xe70 kernel/workqueue.c:3416 kthread+0x2e3/0x380 kernel/kthread.c:388 ret_from_fork+0x5c/0x90 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-36921 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: guard against invalid STA ID on removal Guard against invalid station IDs in iwl_mvm_mld_rm_sta_id as that would result in out-of-bounds array accesses. This prevents issues should the driver get into a bad state during error handling. | ||||
| CVE-2024-36918 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Check bloom filter map value size This patch adds a missing check to bloom filter creating, rejecting values above KMALLOC_MAX_SIZE. This brings the bloom map in line with many other map types. The lack of this protection can cause kernel crashes for value sizes that overflow int's. Such a crash was caught by syzkaller. The next patch adds more guard-rails at a lower level. | ||||
| CVE-2024-36913 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-08-04 | 9.3 Critical |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Leak pages if set_memory_encrypted() fails In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. VMBus code could free decrypted pages if set_memory_encrypted()/decrypted() fails. Leak the pages if this happens. | ||||
| CVE-2024-36912 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.6 Critical |
| In the Linux kernel, the following vulnerability has been resolved: Drivers: hv: vmbus: Track decrypted status in vmbus_gpadl In CoCo VMs it is possible for the untrusted host to cause set_memory_encrypted() or set_memory_decrypted() to fail such that an error is returned and the resulting memory is shared. Callers need to take care to handle these errors to avoid returning decrypted (shared) memory to the page allocator, which could lead to functional or security issues. In order to make sure callers of vmbus_establish_gpadl() and vmbus_teardown_gpadl() don't return decrypted/shared pages to allocators, add a field in struct vmbus_gpadl to keep track of the decryption status of the buffers. This will allow the callers to know if they should free or leak the pages. | ||||
| CVE-2024-36883 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix out-of-bounds access in ops_init net_alloc_generic is called by net_alloc, which is called without any locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It is read twice, first to allocate an array, then to set s.len, which is later used to limit the bounds of the array access. It is possible that the array is allocated and another thread is registering a new pernet ops, increments max_gen_ptrs, which is then used to set s.len with a larger than allocated length for the variable array. Fix it by reading max_gen_ptrs only once in net_alloc_generic. If max_gen_ptrs is later incremented, it will be caught in net_assign_generic. | ||||
| CVE-2024-36288 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: SUNRPC: Fix loop termination condition in gss_free_in_token_pages() The in_token->pages[] array is not NULL terminated. This results in the following KASAN splat: KASAN: maybe wild-memory-access in range [0x04a2013400000008-0x04a201340000000f] | ||||
| CVE-2024-36032 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: qca: fix info leak when fetching fw build id Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. | ||||
| CVE-2024-36019 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: regmap: maple: Fix cache corruption in regcache_maple_drop() When keeping the upper end of a cache block entry, the entry[] array must be indexed by the offset from the base register of the block, i.e. max - mas.index. The code was indexing entry[] by only the register address, leading to an out-of-bounds access that copied some part of the kernel memory over the cache contents. This bug was not detected by the regmap KUnit test because it only tests with a block of registers starting at 0, so mas.index == 0. | ||||
| CVE-2024-36018 | 1 Linux | 1 Linux Kernel | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nouveau/uvmm: fix addr/range calcs for remap operations dEQP-VK.sparse_resources.image_rebind.2d_array.r64i.128_128_8 was causing a remap operation like the below. op_remap: prev: 0000003fffed0000 00000000000f0000 00000000a5abd18a 0000000000000000 op_remap: next: op_remap: unmap: 0000003fffed0000 0000000000100000 0 op_map: map: 0000003ffffc0000 0000000000010000 000000005b1ba33c 00000000000e0000 This was resulting in an unmap operation from 0x3fffed0000+0xf0000, 0x100000 which was corrupting the pagetables and oopsing the kernel. Fixes the prev + unmap range calcs to use start/end and map back to addr/range. | ||||
| CVE-2024-36016 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2026-08-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tty: n_gsm: fix possible out-of-bounds in gsm0_receive() Assuming the following: - side A configures the n_gsm in basic option mode - side B sends the header of a basic option mode frame with data length 1 - side A switches to advanced option mode - side B sends 2 data bytes which exceeds gsm->len Reason: gsm->len is not used in advanced option mode. - side A switches to basic option mode - side B keeps sending until gsm0_receive() writes past gsm->buf Reason: Neither gsm->state nor gsm->len have been reset after reconfiguration. Fix this by changing gsm->count to gsm->len comparison from equal to less than. Also add upper limit checks against the constant MAX_MRU in gsm0_receive() and gsm1_receive() to harden against memory corruption of gsm->len and gsm->mru. All other checks remain as we still need to limit the data according to the user configuration and actual payload size. | ||||