Export limit exceeded: 10145 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (10145 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-65819 | 1 Gopacket | 1 Gopacket | 2026-08-11 | 7.5 High |
| gopacket provides packet processing capabilities for Go. Through version 1.7.0, multiple layer decoders use attacker-controlled lengths, counts, or offsets before validating them against packet buffers, allowing a crafted packet decoded through DecodingLayerParser or DecodeFromBytes to trigger an unrecovered panic and remotely deny service. A patch commit is available at 210f25f. | ||||
| CVE-2026-68366 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well. | ||||
| CVE-2026-68339 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: validate Realtek vendor event length btusb_recv_event_realtek() reads the event code at data[0] and the Realtek subevent code at data[2] before deciding whether to consume a vendor event as a coredump. For example, the two-byte event ff 00 contains a complete vendor-event header declaring zero parameters. The old classifier still reads a nonexistent third byte and can misclassify the event as a coredump if the adjacent byte is 0x34. Require the HCI event header and first parameter to be present before inspecting the Realtek subevent code. Short events continue through the normal HCI receive path, which owns their protocol validation. | ||||
| CVE-2026-19017 | 1 Hashicorp | 2 Consul, Consul Enterprise | 2026-08-10 | 6.8 Medium |
| Consul Community Edition and Consul Enterprise 1.18.21 through 2.0.2 are vulnerable to a partial arbitrary file read when configured to use the Vault Connect CA provider with JWT or AppRole authentication. A privileged attacker with `operator:write` permission may direct Consul to read and forward credential files outside the intended scope, potentially leading to the exfiltration of sensitive secrets from the Consul server host. This vulnerability, CVE-2026-19017, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. | ||||
| CVE-2026-72568 | 1 Redis | 1 Redis | 2026-08-10 | 7.1 High |
| An out-of-bounds read vulnerability in Redis through 8.8.1 allows an adjacent unauthenticated attacker to cause denial of service or information disclosure by sending a specially crafted PING message to the Redis Cluster Bus port. | ||||
| CVE-2026-68277 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers Three sideband reply parsers read 16-bit fields as: val = (raw->msg[idx] << 8) | (raw->msg[idx+1]); and check bounds only after the fact. When idx == raw->curlen, raw->msg[idx+1] reads one byte past the received message data into the following struct fields (curchunk_len, curchunk_idx, curlen). Affected functions: - drm_dp_sideband_parse_enum_path_resources_ack() full_payload_bw_number and avail_payload_bw_number fields - drm_dp_sideband_parse_allocate_payload_ack() allocated_pbn field - drm_dp_sideband_parse_query_payload_ack() allocated_pbn field Fix by using a single combined check (idx + 2 > curlen) before each 2-byte read. Since the check is strictly tighter than idx > curlen, no separate step is needed. [added fixes tag] | ||||
| CVE-2026-11743 | 1 Zephyrproject | 1 Zephyr | 2026-08-10 | 6.6 Medium |
| The SF32LB MPI QSPI NOR flash driver (drivers/flash/flash_sf32lb_mpi_qspi_nor.c) validated the flash offset and length on its read and write paths with the test (offset + size) > data->size. Because offset is a signed off_t while size is unsigned, a negative offset is converted to a large unsigned value and the addition can wrap to a small result that passes the check. The read path then performs memcpy(dst, (void *)(data->base + offset), size) and the write path programs flash at offset and cache-invalidates data->base + offset, in both cases accessing memory outside the mapped flash window. The driver's erase path already rejected negative offsets, but read and write did not. In builds with CONFIG_USERSPACE, flash_read and flash_write are syscalls whose verifiers validate the device object and the caller's buffer but deliberately delegate offset bounds checking to the driver. An unprivileged thread that has been granted access to this flash device can therefore call the syscall with a crafted negative offset and a buffer valid in its own memory domain, and reach the unchecked access. The most direct impact is on the read path: by choosing a negative offset and matching size, an attacker slides the memcpy source below the flash base and copies arbitrary CPU-addressable memory into its own buffer, disclosing memory it is not authorized to read. The write path additionally allows programming flash at an out-of-range address and invalidating an attacker-chosen cache range, affecting integrity and availability. Reachability requires userspace to be enabled and the raw flash device object to be granted to an untrusted thread. The fix replaces the check with qspi_nor_range_is_valid(), which rejects negative offsets and performs the bound comparison in overflow-safe 64-bit arithmetic on both paths, and additionally adds an SRAM DMA bounce buffer plus source/destination overlap rejection to prevent a separate DMA bus-hang condition. | ||||
| CVE-2026-68187 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: exec: fix unsigned loop counter wrap in transfer_args_to_stack() The stop value is derived from bprm->p >> PAGE_SHIFT. The index variable is an unsigned long. If bprm->p drops below PAGE_SIZE and stop becomes zero the loop condition index >= stop is always true. After the index == 0 iteration the decrement wraps to ULONG_MAX and bprm->page[ULONG_MAX] reads sizeof(void *) bytes in front of the array. The pointer has wrapped to -1. That garbage pointer is then passed to kmap_local_page() and PAGE_SIZE bytes are copied from wherever that lands into the stack of the process being created. And the loop doesn't terminate either... Getting there only requires bprm->p < PAGE_SIZE. On !MMU bprm_set_stack_limit() and bprm_hit_stack_limit() are empty. So the only constraint on how far bprm->p is pushed down is valid_arg_len(), i.e. that each individual string still fits in what is left. bprm->p starts at PAGE_SIZE * MAX_ARG_PAGES - sizeof(void *) so a single argument or environment string of a little over 31 pages leaves it in the first page: Oops - load access fault [#1] CPU: 0 UID: 0 PID: 1 Comm: victim Not tainted 7.2.0-rc4 #1 epc : __memcpy+0xd4/0xf8 ra : transfer_args_to_stack+0xaa/0xae s4 : ffffffffffffffff s2 : 0000000000000000 a1 : ffffffdc98000000 a2 : 0000000000001000 status: 0000000a00001880 badaddr: ffffffdc98000000 cause: 0000000000000005 [<801a5324>] __memcpy+0xd4/0xf8 [<800d5f6a>] load_flat_binary+0x43a/0x65e [<800a2de4>] bprm_execve+0x1d4/0x316 [<800a351a>] do_execveat_common+0x12e/0x138 [<800a3d44>] __riscv_sys_execve+0x38/0x4e Kernel panic - not syncing: Fatal exception in interrupt This is an arcane bug but we should still fix it. Count down from MAX_ARG_PAGES so the loop ends when index reaches stop, stop == 0 included. The iterations performed are unchanged for every other value of stop. Only CONFIG_MMU=n builds are affected, transfer_args_to_stack() is used by binfmt_flat and binfmt_elf_fdpic on nommu only. The loop predates git history. commit 7e7ec6a93434 ("elf_fdpic_transfer_args_to_stack(): make it generic") only moved it from binfmt_elf_fdpic.c into fs/exec.c and narrowed the copy to the used part of the first page. The condition and the decrement are unchanged from 2.6.12-rc2. | ||||
| CVE-2024-21344 | 1 Microsoft | 20 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 17 more | 2026-08-10 | 5.9 Medium |
| Windows Network Address Translation (NAT) Denial of Service Vulnerability | ||||
| CVE-2024-21343 | 1 Microsoft | 20 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 17 more | 2026-08-10 | 5.9 Medium |
| Windows Network Address Translation (NAT) Denial of Service Vulnerability | ||||
| CVE-2023-36905 | 1 Microsoft | 14 Windows 10, Windows 10 1507, Windows 10 1607 and 11 more | 2026-08-10 | 5.5 Medium |
| Windows Wireless Wide Area Network Service (WwanSvc) Information Disclosure Vulnerability | ||||
| CVE-2026-68099 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: restore DACL size on check_add_overflow() to avoid malformed ACL check_add_overflow() unconditionally writes the truncated sum into *d even on overflow, per its contract in include/linux/overflow.h. The four check_add_overflow() guards in set_posix_acl_entries_dacl() and set_ntacl_dacl() break out of the ACE-building loops on overflow, but the truncated *size is then consumed downstream at the end of set_ntacl_dacl(): pndacl->size = cpu_to_le16(le16_to_cpu(pndacl->size) + size); This produces an on-wire NT ACL whose pndacl->size under-reports the bytes actually written by the preceding fill_ace_for_sid()/memcpy() calls, yielding a malformed ACL that can trigger out-of-bounds reads when re-parsed by clients or ksmbd itself. Restore *size to its pre-addition value on each overflow branch (via `*size -= ace_sz` / `size -= nt_ace_size`) so that after the break, *size once again holds the cumulative size of the successfully-written ACEs. The committed ACL is then truncated-but-self-consistent rather than malformed. The ksmbd DACL builders are the only check_add_overflow() sites found where an overflow path breaks out of a loop and the destination value is consumed afterward. The other nearby break-style cases either return -EINVAL on overflow (transport_ipc.c) or break without consuming the overflowed destination value afterward (buildid.c). | ||||
| CVE-2026-71256 | 1 Debevv | 1 Nanomodbus | 2026-08-10 | 9.8 Critical |
| nanoMODBUS through v1.23.0 contains an out-of-bounds stack read leading to a wild-pointer write in nmbs_read_device_identification_basic / recv_read_device_identification_res in nanomodbus.c. A fixed 3-element stack array order[3] = {0,1,2} maps object IDs to buffer indices. The server-supplied object_id field (0-255, read directly from the wire) is used without any bounds check as buf_index = order[object_id]. | ||||
| CVE-2026-54413 | 1 Driftregion | 1 Iso14229 | 2026-08-10 | 8.2 High |
| driftregion iso14229 through 0.9.0 contains an integer underflow and downstream out-of-bounds read in the Handle_0x27_SecurityAccess function in iso14229.c that allows a remote unauthenticated attacker to crash a UDS server and potentially read memory past the receive buffer by sending a single-byte 0x27 SecurityAccess request that follows any earlier well-formed 0x27 message. | ||||
| CVE-2026-54412 | 1 Liambindle | 1 Mqtt-c | 2026-08-10 | 8.2 High |
| LiamBindle MQTT-C through version 1.1.6 contains a heap-based out-of-bounds read and integer underflow in the mqtt_unpack_publish_response function in src/mqtt.c that allows a remote unauthenticated attacker controlling an MQTT broker - or able to inject MQTT traffic into an unencrypted session - to crash a subscribed MQTT-C client and potentially disclose adjacent heap memory by sending a single crafted PUBLISH packet. | ||||
| CVE-2026-43197 | 1 Linux | 1 Linux Kernel | 2026-08-09 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: netconsole: avoid OOB reads, msg is not nul-terminated msg passed to netconsole from the console subsystem is not guaranteed to be nul-terminated. Before recent commit 7eab73b18630 ("netconsole: convert to NBCON console infrastructure") the message would be placed in printk_shared_pbufs, a static global buffer, so KASAN had harder time catching OOB accesses. Now we see: printk: console [netcon_ext0] enabled BUG: KASAN: slab-out-of-bounds in string+0x1f7/0x240 Read of size 1 at addr ffff88813b6d4c00 by task pr/netcon_ext0/594 CPU: 65 UID: 0 PID: 594 Comm: pr/netcon_ext0 Not tainted 6.19.0-11754-g4246fd6547c9 Call Trace: kasan_report+0xe4/0x120 string+0x1f7/0x240 vsnprintf+0x655/0xba0 scnprintf+0xba/0x120 netconsole_write+0x3fe/0xa10 nbcon_emit_next_record+0x46e/0x860 nbcon_kthread_func+0x623/0x750 Allocated by task 1: nbcon_alloc+0x1ea/0x450 register_console+0x26b/0xe10 init_netconsole+0xbb0/0xda0 The buggy address belongs to the object at ffff88813b6d4000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 0 bytes to the right of allocated 3072-byte region [ffff88813b6d4000, ffff88813b6d4c00) | ||||
| CVE-2026-20346 | 1 Cisco | 1 Secure Endpoint | 2026-08-08 | 7.5 High |
| A vulnerability in the PDF file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in PDF files during scanning, which may result in an out-of-bounds buffer read. An attacker could exploit this vulnerability by submitting a crafted PDF file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-20347 | 1 Cisco | 1 Secure Endpoint | 2026-08-08 | 7.5 High |
| A vulnerability in the Mach-O file format parser of ClamAV could allow an unauthenticated, remote attacker to cause a DoS condition or possibly other expanded impacts as a result of memory corruption on an affected device. This vulnerability is due to improper boundary checks for content in Mach-O files during scanning, which may result in an out-of-bounds buffer read. An attacker could exploit this vulnerability by submitting a crafted Mach-O file to be scanned by ClamAV on an affected device. A successful exploit could allow the attacker to cause the ClamAV scanning process to terminate, resulting in a DoS condition on the affected software. | ||||
| CVE-2026-64578 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate compound request size before reading StructureSize2 When ksmbd validates a compound (chained) SMB2 request, ksmbd_smb2_check_message() reads pdu->StructureSize2 without first checking that the compound element is large enough to contain it. StructureSize2 is a 2-byte field at offset 64 (__SMB2_HEADER_STRUCTURE_SIZE) from the start of each element. The compound-walking logic only guarantees that a full 64-byte SMB2 header is present for the trailing element: when NextCommand is 0, len is reduced to the number of bytes remaining after next_smb2_rcv_hdr_off. A remote client can craft a compound request whose last element has exactly 64 bytes, so the 2-byte StructureSize2 read at offset 64 extends one byte past the receive buffer, producing a slab-out-of-bounds read. BUG: KASAN: slab-out-of-bounds in ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) Read of size 2 at addr ffff888012ae31ac by task kworker/0:1/14 The buggy address is located 172 bytes inside of allocated 173-byte region Workqueue: ksmbd-io handle_ksmbd_work Call Trace: ... kasan_report (mm/kasan/report.c:595) ksmbd_smb2_check_message (fs/smb/server/smb2misc.c:402) handle_ksmbd_work (fs/smb/server/server.c:119) process_one_work (kernel/workqueue.c:3314) worker_thread (kernel/workqueue.c:3397) kthread (kernel/kthread.c:436) ret_from_fork (arch/x86/kernel/process.c:158) ret_from_fork_asm (arch/x86/entry/entry_64.S:245) Reject any compound element that is too small to hold StructureSize2 before dereferencing it. | ||||
| CVE-2026-64567 | 1 Linux | 1 Linux Kernel | 2026-08-08 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: reject free space cache with more entries than pages When loading a v1 free space cache, __load_free_space_cache() takes num_entries and num_bitmaps straight from the on-disk btrfs_free_space_header. That header is stored in the tree_root under a key with type 0, which the tree-checker has no case for, so neither count is validated before the load trusts it. The load loops num_entries times and maps the next page whenever the current one runs out, going through io_ctl_check_crc() -> io_ctl_map_page(), which does io_ctl->pages[io_ctl->index++]. But pages[] is allocated in io_ctl_init() from the cache inode's i_size, not from num_entries: num_pages = DIV_ROUND_UP(i_size_read(inode), PAGE_SIZE); io_ctl->pages = kcalloc(num_pages, sizeof(struct page *), GFP_NOFS); So if num_entries claims more records than the pages can hold, io_ctl->index runs off the end of pages[]. The write side never hits this because io_ctl_add_entry() and io_ctl_add_bitmap() both stop once io_ctl->index >= io_ctl->num_pages; the read side just never had the same check. To trigger it, take a clean cache (num_entries = <N> here), set num_entries in the header to 0x10000, and fix up the leaf checksum so it still passes the tree-checker. The cache inode has i_size = 65536, so num_pages is 16 and pages[] is a 16-pointer (kmalloc-128) array. The load now tries to read 65536 entries, io_ctl->index walks up to 16, and pages[16] is read past the array: BUG: KASAN: slab-out-of-bounds in io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) Read of size 8 at addr ffff88800c833a80 by task kworker/u8:3/58 io_ctl_check_crc (fs/btrfs/free-space-cache.c:420 fs/btrfs/free-space-cache.c:565) __load_free_space_cache (fs/btrfs/free-space-cache.c:655 fs/btrfs/free-space-cache.c:820) load_free_space_cache (fs/btrfs/free-space-cache.c:1017) caching_thread (fs/btrfs/block-group.c:880) btrfs_work_helper (fs/btrfs/async-thread.c:312) process_one_work worker_thread kthread ret_from_fork free-space-cache.c:420 is io_ctl_map_page(), inlined into io_ctl_check_crc() at line 565, which is why that is the frame KASAN names. The out-of-bounds slot is then treated as a struct page and handed to crc32c(), so the bad read turns into a GP fault. Add the missing check to io_ctl_check_crc(), which is where both the entry loop and the bitmap loop end up. When num_entries is too large the load now fails like any corrupt cache: __load_free_space_cache() drops it and rebuilds the free space from the extent tree, so a valid cache is never rejected. | ||||